Reset
KYOSHO
Kyosho 1/10 2021 Toyota Tac...
$759.99
$799.00
Enjoy powerful pickup truck performance, in realistic 1/10 scale!
With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models.
Features
Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter.
Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck.
Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale.
LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if rear back lights installed) are fully lit.
Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With rear back lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1)
Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt.
Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on.
Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC.
3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs.
Full ball bearings (22) equipped for optimal drive efficiency and durability.
Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving.
Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes.
Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately.
Low & wide shape of the polycarbonate body has been immaculately recreated with the unique TRD Pro front grille and light buckets to enhance the 3-dimensional effect. Durable 1.5mm PC body.
Body mounts on front and rear secure the body from under the chassis so scale appearance is not compromised by exposed body pins on the outside of the body.
Based on the 1/10 scale Mad Wagon bush-basher off-road chassis, the KB10L has an extended wheelbase and shortened suspension arms with the stability of the shaft-type 4WD.
Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. Newly designed long aluminum chassis produces reliable traction even on low-grip surfaces.
Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis.
Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Extendable resin universal shafts on the lower suspension arms are interchangeable between front and rear for parts and maintenance efficiency.
Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part.(One BRG005 bearing is required separately.)
Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear for the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part.(BRG005 bearing is required separately.)
Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale.
Contents
Factory assembled chassis complete with control linkages
Pre-cut and painted body complete with decals applied
2.4GHz Syncro KT-231P+ transmitter
1.5mm/2.0mm/2.5mm L shaped hex wrench
Cross wrench
4/5/5.5/7/10mm Integrated spanner
Requires
AA-size batteries x 4 for transmitter
Battery for driving (2-3S LiPo battery *Installable battery size 143x47x30mm)
Charger for LiPo battery
KYOSHO
Kyosho 33016 1/8 GP 4WD R/S...
$759.99
$799.00
Feel the impulse for full throttle of the high-torque engine and experience stadium truck power and stability.
With 8 World Championship titles, the INFERNO is recognized as Kyosho’s flagship model. The updated 1/8 scale INFERNO NEO ST Race Spec 3.0 brings the dynamic racing potential of INFERNO performance DNA to stadium truck racing. Mounted with the user-friendly KE25SP engine fitted with recoil starter, optimal balance of speed and handling is realized through Big Bore oil shocks and unique block pattern tires that dominate on any type of surface, including race circuits. With its racing chassis base, durability and reliability combine with wide scope of setting options and compatibility with performance-enhancing optional parts so you can tune your truck into a dynamic high-performance machine! With this Readyset package, the thrilling world of engine-powered off-road trucking is easy for everyone to enjoy.
Most chassis components are shared with the Inferno 1/8 engine racing buggy, but with wider tread and large diameter tires for enhanced performance stability.
Included KE25SP engine delivers an optimal balance of power, torque, easy starting, and idling stability. Features rear exiting exhaust, recoil starter, and slide carburetor as standard. Includes break-in ring so beginners can easily manage the engine break-in process.
Features the latest Inferno radio system layout that positions the weight of the receiver battery towards the front for superior stability.
Adjustable front & rear upper rods and steering tie rods allow precision adjustment of front and rear camber as well as front toe angle to match setup to different situations.
Big Bore resin shocks on front and rear provide excellent shock absorption and handling as well as precision dial adjustment of chassis height.
Low profile aerodynamic body with forward cabin realizes superior stability through corners and over jumps. In addition, a new graphics design enhances visual style.
Newly designed big block pattern tires dominate any running surface. Style is backed up by the performance of twin 6-spoke gun metallic wheels.
Light steering feel is realized from the included high-torque KS5031-09MW servo that features metal gears for superior durability.
Included 2.4GHz Syncro KT-231P+ transmitter automatically manages frequency bands and provides precision dial setting adjustment of throttle trim, steering trim, throttle EPA, and steering dual rate etc.
Features
Readyset includes Inferno based shaft drive 4WD chassis with latest radio system layout and completed body.
KE25SP engine is matched with premium polished muffler and manifold.
Maintenance-friendly chassis construction has removed the use of E-rings.
Front-Center-Rear gear differentials provide optimal power transfer to all four wheels.
Universal swing shafts equipped on front minimize drive loss and increase crash resistance.
Equipped with stabilizer bars on front and rear to control chassis roll through corners.
High-degree of compatibility with parts used in the highest spec Inferno ST RR Evo.2 model.
Compatible with Inferno series optional parts to unlock even more performance from your machine.
Contents
Fully assembled chassis complete with RC linkages
Pre-cut body finished with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5, 2.0, 2.5, 3.0mm hex wrenches
Cross wrench (large)
17mm wheel wrench
Requires
Glow fuel
8 x AA-size alkaline batteries for receiver and transmitter
Engine starting tools (fuel bottle, plug heater)
E-FLITE
E-Flite Beechcraft D18 1.5m...
$749.99
The E-flite® Beechcraft D18 1.5m is the most convenient and easiest-to-fly scale model of the classic aircraft yet! Well-equipped with many scale details, functional features, and Smart Technology, it's a modern-day marvel for a wide range of pilots.
Creation of a Classic
The design of the "Twin Beech" D18 proved so adaptable that Beechcraft Aircraft Corporation eventually produced 32 versions — and more than 9,000 total aircraft — from 1937 to 1969. They served in a wide variety of roles from passenger transport, to mail carrier, and even as a military trainer for navigators and bombardiers. The E-flite® Beechcraft D18 1.5m is the most convenient, well-equipped, and easiest-to-fly scale model of the unique general aviation aircraft yet! Its fully-molded EPO airframe is finished with a classic trim scheme and is outfitted with numerous scale details. Functional features such as LED navigation lights, retractable landing gear, and flaps further increase its realism. The 3S and 4S compatible power system includes an exclusive Spektrum™ Avian™ Dual Smart ESC, and the BNF® Basic version is also equipped with an AR631 receiver to deliver real-time telemetry data along with AS3X® and SAFE® Select technologies. The Beechcraft D18 1.5m turns the aviation classic into a modern-day RC marvel that's practical for a wide range of pilots to enjoy!
From unique aviation classic to modern-day marvel!
The E-flite® Beechcraft D18 1.5m is the best, most convenient, and easiest-to-fly scale model of one of general aviation's most unique and recognizable aircraft! Its twin brushless power system with specially tuned motors delivers an abundance of thrust when using a 3S LiPo battery. For more speed and vertical performance, just install a 4S pack. No modifications or upgrades are needed! It's also equipped with an exclusive 40-amp Spektrum™ Avian™ Dual Smart ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries via compatible receivers (including the AR631 installed in the BNF® Basic version) and Spektrum AirWare™ equipped transmitters. The BNF® Basic version is also the only Twin Beech model equipped with AS3X® and optional-use SAFE® Select technologies to make this the easiest to fly D18 yet! Factory-finished in a classic trim scheme, the lightweight yet durable, composite-reinforced and fully-molded EPO airframe features an abundance of scale detail — molded-in panel lines and hatches, antennas, exhaust stacks, a clear cockpit, and more. Included functional flaps, twin rudders, and LED navigation lights take your experience to another level. Factory-installed electric retracts with durable metal components allow you to fly from a wide variety of surfaces including paved runways, packed dirt, and even grass. The unique 3-piece wing design makes transport and storage as convenient as possible because the center section includes the main gear and all of the sections feature innovative hands-free connections. And because no glue is required for final assembly, you can have the Beechcraft D18 1.5m ready to fly in less time than it takes to charge a battery!
Features
The most convenient, well-equipped, and easiest-to-fly scale model of the unique general aviation aircraft yet
Scale replica of the iconic aircraft flown for civilian, airline, utility, cargo, military and other uses
Functional features including LED navigation lights, flaps, retracts, and twin rudders
Scale details including a clear cockpit, molded-in panel lines, and more
Factory-installed 3S and 4S-compatible brushless motors with dual 40-amp ESC
Fits batteries from 3200-5000mAh to deliver a wide variety of performance and flight times
40-amp Spektrum™ Avian™ Dual Smart ESC provides real-time battery voltage, motor RPM, and other data, plus differential thrust capabilities, via compatible transmitters
Extremely durable, fully-molded EPO airframe
Spektrum™ AR631 receiver with fly-by range telemetry and industry-leading DSMX® technology
Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X® technology
Six durable and precise digital, metal-geared servos with factory-installed linkages
Electric retracts for operation from a variety of surfaces including grass
Unique 3-piece wing includes center section with main gear plus all sections feature hands-free connections
Convenient top hatch with clear canopy, cockpit detail, and a pilot figure
Classic factory-applied trim scheme with paint and decal finish
Exclusive Technologies
This is the only Beechcraft D18 model equipped with both exclusive Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch, making this the easiest to fly D18 yet! And if you don't want to enable the SAFE Select features, simply bind the receiver normally and only AS3X will be active.
Smart Technology
The Beechcraft D18 1.5m is equipped with an exclusive Spektrum™ Avian™ Dual Smart ESC that can provide a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more – with Smart and non-Smart batteries – via compatible receivers (including the AR631 installed in the BNF® Basic version) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6, 8 and 10, iX12, iX20 and others) while you fly. Plus, differential thrust offers improved ground handling for easier taxiing, takeoffs and landings, along with the ability to perform special aerobatic maneuvers.
Versatile Twin Power
The factory-installed twin brushless power system features a 40-amp Spektrum™ Avian™ Dual Smart ESC plus specially-tuned motors that deliver an abundance of thrust with a 3S LiPo battery, or more speed and vertical performance with a 4S battery without the need for any modifications or upgrades.
Abundant Scale Detail
The lightweight yet durable, composite-reinforced, and fully-molded EPO airframe is equipped with an abundance of scale detail including molded-in panel lines and hatches, antennas, exhaust stacks, a clear cockpit, and more.
Functional Scale Features
Factory-installed LED navigation lights, operational flaps, and twin rudders are functional features that take your experience to another level.
Capable Gear
The factory-installed electric retracts are equipped with durable metal components that make it possible to fly from a wider variety of surfaces including paved runways and even grass.
Durable Precision
Construction with fully-molded EPO material makes it possible to replicate complex detail and shapes in a lightweight yet durable form. The result is an outstanding scale appearance that's easy to maintain and delivers the best possible flight experience. Plus, the factory-installed digital, metal-geared servos deliver crisp and precise control at every speed.
Extra Convenience
The unique 3-piece wing design makes transport and storage as convenient as possible because the center section includes the main gear and all of the sections feature innovative hands-free connections. And the convenient top-mounted hatch makes it quick and easy to install and remove batteries.
Easy Assembly
No glue is required for final assembly, and you can have the Beechcraft D18 1.5m ready to fly in less time than it takes to charge a battery!
Contents
(1) E-flite® Beechcraft D18 1.5m
(1) Spektrum™AR631 6-Channel Receiver (installed)
(1) Spektrum Avian™ Dual 40A Brushless Smart ESC (installed)
(2) Brushless Outrunner Motors (installed)
(6) Digital Servos (installed)
(1) Product Instruction Manual
Requires
(1) Full-range 6–8+ Channel Spektrum™ DSMX®/DSM2® Compatible Transmitter
(1) 3S 11.1V or 4S 14.8V 3200–5000mAh LiPo with EC3™ or IC3® Connector
(1) Compatible LiPo Charger
PRO BOAT
Pro Boat PRB08032V2T2 Sonic...
$749.99
The Pro Boat® Sonicwake 36-inch Self-Righting Deep-V has exactly what you’re looking for in a Deep-V design―speed and performance. Plus, it features a self-righting hull with sealing canopy.
Break through choppy water and go full throttle with the Pro Boat® Sonicwake 36-inch Self-Righting Deep-V. The perfect Deep-V for the beginner to the avid boater, it offers performance capable of hitting 50+ MPH and a worry-free self-righting feature that flips the boat back upright in a matter of seconds.
The water-cooled 4-pole 1900Kv brushless motor invites you to go fast while the high torque, metal gear, and waterproof steering servo keeps you in control. It features improved dual water cooling, adjustable trim tabs, and larger turn fins. No matter your skill level, the Sonicwake features everything experts and beginners alike want in a Deep-V.
Serious Speed
The Sonicwake 36-inch Self-Righting Deep-V features a ballistic 40x68mm 4-pole Spektrum™ Firma™ 1900Kv water-cooled brushless motor capable of propelling the boat to speeds in excess of 50+ MPH.
Extreme Power From Waterproof Electronics
The Sonicwake uses the new Smart-ready Spektrum 120A BL Marine ESC that can handle more amperage than needed to run the boat with authority and speed.
Self-righting Hull Design
Designed to be as stable as possible with a self-righting feature if you ever flip it. Unlike other boats, the self-right feature does not require power to work. Give it a few seconds and the flood chamber will fill with water, making the boat self-right. Hit the throttle and the water exits the flood chamber as the boat moves forward.
Upgraded Hardware
Now with larger turn fins, Adjustable trim tabs, and larger propeller strut. Fine tuning your boat has never been easier.
SLT Radio System
The SLT3 is included with the all-new Dual Protocol receiver. This system allows you to upgrade to the Spektrum radio of your choice, without the need to purchase a separate receiver.
Dual Water Pickup
Keeping your electronics cool is a priority and we have increased the water flow by adding a dual water rudder pickup. This added water flow will make sure cool clean water is being sent to both the ESC and Motor keeping your temps in check.
Clean Interior
Keep your boat looking good, with this all-new interior keeping your boat clean is easier than ever. We have integrated a receiver box to keep your interior looking clean and dry. We have optimized mounting post for the all new Spektrum™ Smart 120A water-cooled ESC and powerful Spektrum™ Marine Brushless motor while providing easy access to securing your batteries.
Sealed Canopy
The lightweight canopy features locking threaded thumb screws making it easy to put on and remove the canopy for hull access. A foam gasket around the canopy opening prevents water from flooding the hull when upside down.
Features
Self-righting Hull Design
Spektrum SLT3 2CH 2.4GHz DSMR Radio System
Spektrum SR315 Dual Protocol Receiver
Spektrum 120A Marine ESC
4-pole Spektrum FIRMA 1900KV Water-cooled Brushless Motor
Sealed Canopy
Large turn fins, adjustable trim tabs, and large propeller strut
Aluminum Breakaway Offset Rudder
Screaming Across The Surface
Contents
Sonicwake 36-inch Self-Righting Deep-V
Spektrum™ SLT3 3-Channel SLT Transmitter with SR315 Receiver (installed)
Spektrum™ 120A BL Marine ESC (installed)
Spektrum™ Firma™ 40x68mm 4-pole 1900Kv Motor (installed)
Boat Stand
Requires
100C+ 2S-3S LiPo Batteries with IC5® or EC5™ Connector x 2
Dual LiPo charger
AA Batteries x 4
AXIAL
Axial SCX10 III 1987 Toyota...
$749.95
The fan-favorite Toyota SR5 is an iconic pickup that has conquered every legendary off-road destination out there. As popular as any crawling capable vehicle, SR5 pickups can be found making quick work of the hardest trails from the Rubicon to Johnson Valley to Imogene Pass and beyond. The Axial® SCX10 III 1987 Toyota SR5 is Axial's first officially licensed 1/10-scale Toyota, combining iconic SR5 styling with Trail-Gear components that real off-roaders trust.
The SR5's authenticity starts with the detailed Xtra Cab body featuring scale-molded grille, headlights, taillights, and hood latches and continues down to the amazing Trail-Gear (TG) axles they not only look cool but increase performance. The AR45P portal axles feature authentic fabricated-style housings that capture Trail-Gear's designs perfectly while providing superior ground clearance and durability. Completing the authentic Trail-Gear look are the officially licensed Creeper Lock beadlock wheels wrapped in Interco Super Swamper tires.
The SR5's authenticity starts with the detailed Xtra Cab body featuring scale-molded grille, headlights, taillights, and hood latches and continues down to the amazing Trail-Gear (TG) axles they not only look cool but increase performance. The AR45P portal axles feature authentic fabricated-style housings that capture Trail-Gear's designs perfectly while providing superior ground clearance and durability. Completing the authentic Trail-Gear look are the officially licensed Creeper Lock beadlock wheels wrapped in Interco Super Swamper tires.
Built on the proven SCX10 III platform, the SR5 features a steel C-channel chassis that reduces flexing while increasing suspension precision. The durable LCXU transmission with dig function provides reliable power transfer, while aluminum adjustable coilover shocks deliver tunable performance. High-clearance bumpers optimize approach and departure angles for technical terrain.
The ready-to-run package includes a Spektrum™ SLT3 transmitter, SR515 DSMR® 5-channel waterproof receiver, and 40A waterproof brushed ESC all designed to help drivers succeed. Whether you're a Toyota enthusiast discovering RC crawling or an experienced crawler adding to your collection, the SCX10 III 1987 Toyota SR5 delivers the authenticity and performance that makes every trail conquest memorable.
Features
Officially licensed 1987 Toyota SR5 Xtra Cab body with scale-molded details
Clipless body mounting system for clean looks and easy access
Trail-Gear AR45P portal axles with licensed fabricated-style housings
Trail-Gear rock sliders with boat-side design for smooth obstacle navigation
Trail-Gear Creeper Lock beadlock wheels with authentic scale appearance
Officially licensed Interco Super Swamper tires for superior traction
SCX10 III steel C-channel chassis for strength and precision
LCXU transmission with dig function for reliable power and tight turning
Aluminum adjustable coilover shocks for tunable performance
Molded composite exocage for rugged trail-worthy styling
Aluminum adjustable coilover shocks for tunable performance
High-clearance bumpers for optimized approach and departure angles
Bobbed and dovetailed bed for enhanced clearance and maneuverability
Spektrum™ SLT3 3-channel transmitter with beginner-friendly features
Spektrum SR515 DSMR® 5-channel receiver in sealed waterproof box
Spektrum SPMS683 waterproof servo with metal gears
Spektrum 40A waterproof brushed ESC for reliable power control
Axial 35T brushed motor for proven trail performance
Ready-to-run - just add 2-3S LiPo battery and compatible charger
LCXU Transmission With Dig
Equipped with a high performance, single-speed LCXU transmission, the SCX10 III 1987 Toyota Xtra Cab has a low center of gravity for stability over courses and trails. The transmission includes a full set of ball bearings, all-metal internal gears for strength and durability. The internal gears can also be switched to allow for our optional standard axles (SA gears sold separately). The included Dig function allows you to lock the rear wheels on command to give tighter turning and also help the front tires grip the rock on those hard-to-reach ledges.
Clipless Body System
The new clipless body system is tough and is built to take some tumbles on the trail. It also gives the truck a nice clean scale look and feel. Just push in the latching tab on the rear of the truck, lift and pull back and your body is off in seconds.
Licensed Trail-Gear AR45P Portal Axles
Included Trail-Gear AR45 portal axles provide extra ground clearance at the differential for easier off-road maneuvering. The Trail-Gear axle housings are the perfect finishing touch for this scale SR5.
Officially Licensed Wheels And Tires
Officially Licensed Trail-Gear Creeper Lock Beadlocks finish off the scale look and performance of this truck. Interco Super Swamper Tires give the grip and ground clearance needed to conquer any trail.
Rock Slider Mounted Battery Tray
The all-new battery tray is integrated into the boat side rock slider giving plenty of space to fit anything from a small competition style battery to a big 5000mah trail LiPo battery. The Elastomer strap gives quick access to the battery while still holding it securely in place.
Licensed Trail-Gear Rock Sliders
Durable Trail-Gear rock sliders improve both scale looks and performance as they not only protect the body and chassis but help the SR5 glide over obstacles.
Aluminum Adjustable Coilover Shocks
The oil-filled shocks have aluminum threaded bodies and a single coilover spring. The shocks are tunable for achieving the best damping rate. These shocks are the ultimate mix of scale and performance!
Optimized Suspension Geometry
The 3-link front suspension geometry of the SR5 is optimized to reduce bump steer, while the rear 4-link reduces torque twist.
Installed Power System
The included and installed power system features an Axial Slickrock 35T brushed motor and Spektrum 40A waterproof brushed ESC. With this simple and reliable combo, you'll spend more time on the trails and less time performing maintenance.
Sealed Receiver Box
Sealed receiver box withstands the elements and protects the Spektrum 5-channel SR515 DSMR receiver. Take on any terrain with confidence!
Spektrum SLT3 2.4GHz Transmitter
The included Spektrum SLT3 transmitter is designed to help all drivers succeed on the trails. Its throttle limiting feature, for example, can limit the rig's maximum available speed to 50% or 75% until you're ready for it all. Four AA batteries are included.
SCX10III Steel C-Channel Chassis
Strong and stiff, the SCX10 III steel C-channel chassis reduces frame flexing and increases the precision of suspension movement. The two-piece chassis design allows you to adjust your trucks wheelbase with ease.
Boat Side Rock Sliders
The new and improved boat side rock sliders provide a smooth angled bottom that gives increased ground clearance and allows SR5 to slide over rocks and obstacles with ease.
All Metal Gears
The SCX10 III LCXU transmission includes a full set of ball bearings and all-metal internal gears for the strength needed for the toughest trails.
High Clearance Bumpers
Not only do the new front and rear bumpers look amazing, but they also perform great. They were designed with scale performance in mind, giving the strength and clearance you needed for reliable performance.
Heavy Duty Wild Bore Driveshafts
Wild Bore Driveshafts provide the strength needed to confidently power over any terrain or obstacle. These driveshafts can take the abuse.
Officially Licensed Toyota SR5 Body
This is the first officially licensed 1/10 vehicle that Axial has offered from Toyota. This body set features scale molded pieces such as the grille, headlights, taillights, external roll cage, and hood latches.
Contents
Axial® SCX10™ III 1987 Toyota SR5 1/10 Scale 4WD RTR
Axial® 35T 540 Brushed Motor
Spektrum™ SLT3 3-Channel SLT Radio
Spektrum™ SR515 DSMR® 5-Channel Receiver
Spektrum™ SPMS683 waterproof metal gear 25T servo
Spektrum™ 40A Waterproof Brushed ESC
AA Transmitter Batteries
Product Manual
Requires
2-3S LiPo battery with IC3 connector
Compatible LiPo charger
AXIAL
Axial SCX10 III 1987 Toyota...
$749.95
The fan-favorite Toyota SR5 is an iconic pickup that has conquered every legendary off-road destination out there. As popular as any crawling capable vehicle, SR5 pickups can be found making quick work of the hardest trails from the Rubicon to Johnson Valley to Imogene Pass and beyond. The Axial® SCX10 III 1987 Toyota SR5 is Axial's first officially licensed 1/10-scale Toyota, combining iconic SR5 styling with Trail-Gear components that real off-roaders trust.
The SR5's authenticity starts with the detailed Xtra Cab body featuring scale-molded grille, headlights, taillights, and hood latches and continues down to the amazing Trail-Gear (TG) axles they not only look cool but increase performance. The AR45P portal axles feature authentic fabricated-style housings that capture Trail-Gear's designs perfectly while providing superior ground clearance and durability. Completing the authentic Trail-Gear look are the officially licensed Creeper Lock beadlock wheels wrapped in Interco Super Swamper tires.
The SR5's authenticity starts with the detailed Xtra Cab body featuring scale-molded grille, headlights, taillights, and hood latches and continues down to the amazing Trail-Gear (TG) axles they not only look cool but increase performance. The AR45P portal axles feature authentic fabricated-style housings that capture Trail-Gear's designs perfectly while providing superior ground clearance and durability. Completing the authentic Trail-Gear look are the officially licensed Creeper Lock beadlock wheels wrapped in Interco Super Swamper tires.
Built on the proven SCX10 III platform, the SR5 features a steel C-channel chassis that reduces flexing while increasing suspension precision. The durable LCXU transmission with dig function provides reliable power transfer, while aluminum adjustable coilover shocks deliver tunable performance. High-clearance bumpers optimize approach and departure angles for technical terrain.
The ready-to-run package includes a Spektrum™ SLT3 transmitter, SR515 DSMR® 5-channel waterproof receiver, and 40A waterproof brushed ESC all designed to help drivers succeed. Whether you're a Toyota enthusiast discovering RC crawling or an experienced crawler adding to your collection, the SCX10 III 1987 Toyota SR5 delivers the authenticity and performance that makes every trail conquest memorable.
Features
Officially licensed 1987 Toyota SR5 Xtra Cab body with scale-molded details
Clipless body mounting system for clean looks and easy access
Trail-Gear AR45P portal axles with licensed fabricated-style housings
Trail-Gear rock sliders with boat-side design for smooth obstacle navigation
Trail-Gear Creeper Lock beadlock wheels with authentic scale appearance
Officially licensed Interco Super Swamper tires for superior traction
SCX10 III steel C-channel chassis for strength and precision
LCXU transmission with dig function for reliable power and tight turning
Aluminum adjustable coilover shocks for tunable performance
Molded composite exocage for rugged trail-worthy styling
Aluminum adjustable coilover shocks for tunable performance
High-clearance bumpers for optimized approach and departure angles
Bobbed and dovetailed bed for enhanced clearance and maneuverability
Spektrum™ SLT3 3-channel transmitter with beginner-friendly features
Spektrum SR515 DSMR® 5-channel receiver in sealed waterproof box
Spektrum SPMS683 waterproof servo with metal gears
Spektrum 40A waterproof brushed ESC for reliable power control
Axial 35T brushed motor for proven trail performance
Ready-to-run - just add 2-3S LiPo battery and compatible charger
LCXU Transmission With Dig
Equipped with a high performance, single-speed LCXU transmission, the SCX10 III 1987 Toyota Xtra Cab has a low center of gravity for stability over courses and trails. The transmission includes a full set of ball bearings, all-metal internal gears for strength and durability. The internal gears can also be switched to allow for our optional standard axles (SA gears sold separately). The included Dig function allows you to lock the rear wheels on command to give tighter turning and also help the front tires grip the rock on those hard-to-reach ledges.
Clipless Body System
The new clipless body system is tough and is built to take some tumbles on the trail. It also gives the truck a nice clean scale look and feel. Just push in the latching tab on the rear of the truck, lift and pull back and your body is off in seconds.
Licensed Trail-Gear AR45P Portal Axles
Included Trail-Gear AR45 portal axles provide extra ground clearance at the differential for easier off-road maneuvering. The Trail-Gear axle housings are the perfect finishing touch for this scale SR5.
Officially Licensed Wheels And Tires
Officially Licensed Trail-Gear Creeper Lock Beadlocks finish off the scale look and performance of this truck. Interco Super Swamper Tires give the grip and ground clearance needed to conquer any trail.
Rock Slider Mounted Battery Tray
The all-new battery tray is integrated into the boat side rock slider giving plenty of space to fit anything from a small competition style battery to a big 5000mah trail LiPo battery. The Elastomer strap gives quick access to the battery while still holding it securely in place.
Licensed Trail-Gear Rock Sliders
Durable Trail-Gear rock sliders improve both scale looks and performance as they not only protect the body and chassis but help the SR5 glide over obstacles.
Aluminum Adjustable Coilover Shocks
The oil-filled shocks have aluminum threaded bodies and a single coilover spring. The shocks are tunable for achieving the best damping rate. These shocks are the ultimate mix of scale and performance!
Optimized Suspension Geometry
The 3-link front suspension geometry of the SR5 is optimized to reduce bump steer, while the rear 4-link reduces torque twist.
Installed Power System
The included and installed power system features an Axial Slickrock 35T brushed motor and Spektrum 40A waterproof brushed ESC. With this simple and reliable combo, you'll spend more time on the trails and less time performing maintenance.
Sealed Receiver Box
Sealed receiver box withstands the elements and protects the Spektrum 5-channel SR515 DSMR receiver. Take on any terrain with confidence!
Spektrum SLT3 2.4GHz Transmitter
The included Spektrum SLT3 transmitter is designed to help all drivers succeed on the trails. Its throttle limiting feature, for example, can limit the rig's maximum available speed to 50% or 75% until you're ready for it all. Four AA batteries are included.
SCX10III Steel C-Channel Chassis
Strong and stiff, the SCX10 III steel C-channel chassis reduces frame flexing and increases the precision of suspension movement. The two-piece chassis design allows you to adjust your trucks wheelbase with ease.
Boat Side Rock Sliders
The new and improved boat side rock sliders provide a smooth angled bottom that gives increased ground clearance and allows SR5 to slide over rocks and obstacles with ease.
All Metal Gears
The SCX10 III LCXU transmission includes a full set of ball bearings and all-metal internal gears for the strength needed for the toughest trails.
High Clearance Bumpers
Not only do the new front and rear bumpers look amazing, but they also perform great. They were designed with scale performance in mind, giving the strength and clearance you needed for reliable performance.
Heavy Duty Wild Bore Driveshafts
Wild Bore Driveshafts provide the strength needed to confidently power over any terrain or obstacle. These driveshafts can take the abuse.
Officially Licensed Toyota SR5 Body
This is the first officially licensed 1/10 vehicle that Axial has offered from Toyota. This body set features scale molded pieces such as the grille, headlights, taillights, external roll cage, and hood latches.
Contents
Axial® SCX10™ III 1987 Toyota SR5 1/10 Scale 4WD RTR
Axial® 35T 540 Brushed Motor
Spektrum™ SLT3 3-Channel SLT Radio
Spektrum™ SR515 DSMR® 5-Channel Receiver
Spektrum™ SPMS683 waterproof metal gear 25T servo
Spektrum™ 40A Waterproof Brushed ESC
AA Transmitter Batteries
Product Manual
Requires
2-3S LiPo battery with IC3 connector
Compatible LiPo charger
MJX
MJX 1/8 Allrock 4WD Brushle...
$749.95
Updated for 2026 the MJX H8H V5 Edition ALL ROCK 1/8 scale RC Crawler Climbing truck!
The new V5 edition is built on the refined H8P chassis and comes available with two decal options.
Marketed as a climbing truck, the H8H is unique in that it can master both slow speed crawls and high speed pursuits (17mph+) with plenty of power available for on-demand wheelies.
The MJX H8H truck is absolutely packed with features with a IP67 rating for water and dust protection, remotely switchable high/low speed transmission, controllable LED lights and bluetooth/smart phone connectivity.
Driving control is aided by a 35KG steering servo, fully metal drive transmission, front and rear lockable differentials, high/low speed gears and a unique FOC vector control system providing absolute control of the magnetic encoded-sensing brushless motor system. Fully compatible with both 7.4v 2S and 11.1v 3S LiPo batteries with a front battery tray to keep the front of the vehicle weighted down.
80A FOC Vector Control Electronic Speed Controller
The MJX H8H electronic speed controller (ESC) features vector control, low torque ripple, low motor noise and fast deceleration and braking. The H8H also supports dual operation modes; both the standard direct forward/reverse (climbing) mode as well as the forward/reverse with braking (normal) mode, meeting the two needs of required of crawler vehicles.
Intelligent torque output and speed closed-loop control
Whether climbing or descending the ESC will automatically increase the output torque to overcome any resistance and help move smoothly over the slope or reduce the torque to stabilise the vehicle speed for seamless descent.
Powerful built-in BEC and Magnetic encoded inductive brushless motor
With it's powerful built-in BES with a maximum 13A output current and a 6V/7.4V switchable output voltage makes it easy to drive all kinds of standard servos and high-voltage servos, as well as peripheral electrical equipment (lamp sets, winches, etc.).
With Bluetooth app connectivity adjusting parameters on the the fly has become even easier, from adjusting the throttle rate/punch, drag brake, neutral range as well as real time battery monitoring and Motor & ESC temperatures.
The built-in chip magnetic encoding sensor, which helps improves the accuracy by 60 compared to the hall sensor commonly used in ordinary inductive brushless motor. The three-phase signal consistency always outputs pure and accurate rotor position signal.
Additional Features
The MJX H8H has an IP67 rating for both Dust and Water protection so you can play until your hearts content. The H8H ALL ROCK also features a professional servo standardly equipped and rated at 35kg steering servo with a metal gear and shell, a mechanical metal gear 2-speed transmission as well as front and rear axle differential lock.
Steel gears, steel transmission shafts and stainless steel connecting rods are fitted throughout the entire vehicle with CNC integrated aluminium-alloy car beams, and alloy oil filled shock absorbers to handle anything you throw at it.
Mounted with 140 LED light beads, allowing the driver to independently control each light group and a front battery tray compartment so you can put the weight where you need it on the fly with out any tools or additional parts.
Features
Fully built and ready to run - just add batteries to the remote
35kg metal servo
Front and rear locking Differentials
3970 Magnetic Encoding-sensing brushless motor system
80A FOC Vector Control ESC
LED lights operated by the remote control
8-channel 2.4GHz radio system so multiple models can run at the same time
4WD drive system complete with all-metal drive chain
Metal Differentials and unique telescopic rear CVD system
Oil filled aluminium capped shock absorbers
IP67 rated water resistant and dust-proof electronics
Anti-skid high grip rubber tyres and wheels
High quality crack-resistant body shell included
Contents
MJX H8H 1/8th Scale H8H V5 Truck with 2.4ghz Radio System (Blue)
User Manual
2S 7.4v battery and USB Charger
Requires
3x AA Batteries for Transmitter Radio
ARRMA
Arrma 1/7 Limitless V2 Spee...
$749.95
$789.99
Optimized for 8S power, this evolution of the ARRMA® LIMITLESS™ 1/7 Scale Speed Bash Roller lets you go even faster than before. Now you can own the RC super car that beat a championship Formula One machine by running a quarter-mile in 8.6 seconds!
The New King of Speed Bashers!
Taking over from the original LIMITLESS™ 1/7 Scale All-Road Speed Bash Roller, this new evolution of the LIMITLESS Speed Bash vehicle has been “Designed FASTER” so you can reach higher speeds than ever before! ARRMA® engineers have improved the already proven LIMITLESS platform to accept bigger motors and larger ESCs — just add your choice of electronics to create an RC super car. The LIMITLESS 1/7 Scale All-Road Speed Bash Roller sits at the very top of the ARRMA Speed Bash range. It’s the new King of Speed Bashers!
In fact, in a head-to-head contest with the real championship-winning, Red Bull Racing RB7 Formula One car, the LIMITLESS 1/7 Scale All-Road Speed Bash Roller came out on top. Reaching speeds of up to 150 MPH, it ran a quarter mile in just 8.6 seconds!
Because the LIMITLESS 1/7 Scale All-Road Speed Bash Roller lets you pick and choose your own electronics package, you can adapt the power system to meet your needs as your speed run skills progress. ARRMA has refined this rolling chassis with transmission and motor mount parts that are optimized for 8S high-speed running.
New features to the LIMITLESS platform include a 3mm anodized aluminum chassis plate that repositions the motor mount to accept longer motors. Easy Access Sliding Motor Mount can fit larger diameter motors with optional motor mounting plate, while the electronics module accepts larger ESCs and incorporates a waterproof receiver box.
Additional changes have been made to increase stability for confident control at high speeds. The 39T Mod 1.0 spool with long rear outdrive combines with a shorter rear center driveshaft for equal length center driveshafts and less drivetrain vibration. Lower ratio GP5 gears reduce centerline drivetrain speed and vibration. Stiffer front springs and sway bar improve high-speed handling, and a wider rear track increases stability.
Carried over from the original LIMITLESS, big bore oil-filled shocks on black-anodized front and rear shock towers keep the dBoots® Hoons™ all-road tires firmly planted for maximum traction over on-road, light off-road, loose gravel, short grass, dirt, and oval tracks.
Besides being the fastest ARRMA Speed Bash vehicle, the LIMITLESS 1/7 Scale All-Road Speed Bash Roller is also the first ARRMA “Rattle Can Roller.” The low-drag body comes unpainted, ready for you to personalize it with your own unique paint scheme. Window mask and decals are included. Trim lines on the front and rear wings make it easy to tune the downforce and drag.
The ultimate RC speed machine experience is here. Install your choice of electronics, paint the body in your signature colors, and create your own high-speed RC super car with the ARRMA LIMITLESS 1/7 Scale All-Road Speed Bash Roller!
* For details on waterproof standards, please refer to product instruction manuals.
The First ARRMA® “Rattle Can Roller”
The low-drag body is now supplied clear for you to personalize it with your own unique paint scheme. Window mask and decals are included. Trim lines on the front and rear wings make it easy to tune the downforce and drag.
Chassis Designed for Larger Motors and ESC’s
The 3mm chassis plate repositions the motor mount to allow longer motors to be used, and the electronics module accepts larger ESCs. Transmission parts are also optimized for 8S high-speed running.
Engineered for High-Speed Stability
The 39T Mod 1.0 spool with long rear outdrive combines with a shorter rear center driveshaft for equal length center driveshafts and less drivetrain vibration. Stiffer front springs and sway bar improve high-speed handling, and a wider rear track increases stability.
Includes dBoots® Hoons™ Tires on Speed Wheels
Big bore oil-filled shocks on black-anodized front and rear shock towers keep the dBoots® Hoons™ all-road tires firmly planted for maximum traction. The tires are mounted on Speed wheels with extra-durable hubs.
New Features
Easy-access sliding motor mount accepts larger diameter motors
3mm Chassis plate repositions the motor mount to also accept longer motors
39T Mod 1.0 Spool with long rear outdrive combines with a shorter rear center driveshaft to reduce drivetrain vibration
Easy-access electronics module accepts larger ESCs and includes a waterproof* receiver box
Safe-D input cups are included on the front and rear gearboxes
GP5 gears have a lower ratio for reduced centerline drivetrain speed and vibration
Wider rear track increases stability
Stiffer front springs and sway bar improve high-speed handling
The first ARRMA “Rattle Can Roller” includes a clear, low-drag body for your own unique paint scheme — window mask and decals are provided
Existing Features
Tunable aerodynamics — trim lines on the front and rear wings allow you to tune the downforce and drag
Includes dBoots® Hoons™ All-Road tires on Speed dish wheels
Two large battery straps with two perpendicular hook-and-loop battery straps provide reliable battery retention
Front-to-rear chassis brace increases longitudinal chassis stiffness
Heavy-duty servo saver
Durable steel driveshafts
Big bore aluminum shocks
Black anodized front and rear shock towers
Independent double wishbone suspension front and rear
Contents
(1) ARRMA® LIMITLESS™ 1/7 Scale All-Road Speed Bash Roller
(1) Customizable Clear Body and Nose Cone
(1) Decal Sheet
(1) Window Mask Sheet
(1) 1/7 LIMITLESS V2 Speed Bash Roller Manual
Requires
(1) 2+ Channel Transmitter and Receiver
(1) Metal Gear, Hi-Torque Steering Servo (23T Spline, Standard Size)
(1) Electronic Speed Control (8S recommended)
(1) Motor (50 Series – Max dimensions 4.33 in L x 1.97 in Dia., 0.98 in (25mm) screw pitch
(2) 4S LiPo Battery
(1) Compatible LiPo Battery Charger
(1) Mod 1 Pinion Gear (to suit chosen motor)
E-FLITE
E-Flite V1200 1.2m RC Plane...
$744.29
Fly fast and look good doing it with the E-flite V1200! The original V1200 quickly became known as one of the fastest right-out-of-the-box models – also capable of unexpectedly stable slow flight for easier landings thanks to its functional flaps – with impressive aerobatic capabilities. Now it's available again with larger, more durable and reliable retract units, a higher visibility color scheme and improved finish, plus the proven high-performance brushless power system that lets you choose how ballistic you want to be. Level-flight top speeds of up to 110+ MPH are possible with 4S batteries. Or reach up to 140+ MPH using common 6S 3200–7000mAh packs! It's equipped with a 100-amp Spektrum Avian Smart ESC, plus the BNF Basic version also features an AR637TA+ receiver to deliver full-range real-time telemetry along with the benefits of enhanced AS3X+ and optional-use SAFE Select technologies.
Grab the sticks to fly the fastest prop-driven E-flite airplane yet! With 4S 3200–5000mAh batteries and the factory-installed brushless power system, the V1200 reaches up to 110+ MPH in level flight- making it suitable for intermediate pilots with some high-speed flying experience. Or more experienced pilots can unleash level-flight top speeds up to 140+ MPH with popular 6S 3200–7000mAh batteries! The Spektrum Avian 100A Smart ESC lets you speed with confidence, knowing all is well with the power system and battery from the real-time telemetry data sent via compatible receivers (such as the BNF Basic version's AR637TA+) to Spektrum AirWare-equipped transmitters.
Speed and aerobatic enthusiasts will love the locked-in precision of the six digital, metal-geared servos and ball-link equipped linkages – especially when flying the BNF Basic version that's equipped with a factory-installed AR637TA+ receiver featuring enhanced AS3X+ and optional-use SAFE Select technologies. Operational flaps improve slow-flight performance and allow for shorter takeoffs and landings. The updated and upgraded, more durable and reliable retracts with sprung wire struts let you fly from paved, packed dirt, or shorter grass surfaces at any suitably sized fields. The sleek airframe is composite-reinforced throughout and is molded in higher-density EPO that delivers a stronger and stiffer airframe with a smoother, dent and damage-resistant surface. Plus, it's now factory-finished in a high-contrast trim scheme with a brighter color for improved visibility and orientation. No glue is required for assembly, and a total of six screws install the stabs, plus the one-piece wing that installs and removes easily for convenient storage and transport, thanks to hands-free connections. That means you can be ready to enjoy a flying experience unlike any other in less time than it takes to charge a battery. It's easier than ever to fly fast and look good doing it with the V1200!
Features
The FASTEST prop-driven E-flite airplane and right-out-of-the-box model yet
An updated and upgraded version with more durable and reliable retracts, plus a higher visibility color scheme with an improved finish
Level-flight top speeds up to 110+ MPH with 4S batteries and up to 140+ MPH with 6S batteries
Compatible with 4S, 5S and 6S batteries from 3200-7000mAh to deliver a wide range of performance and flight times
Extremely wide flight envelope from unexpectedly stable slow-flight to locked-in precision aerobatic capabilities and beyond
Factory-installed high-RPM brushless outrunner motor plus APC 10x8E prop and an aluminum spinner
100-amp Spektrum Avian Smart ESC provides real-time battery voltage, temperatures, motor RPM and other data with Smart and non-Smart batteries
Spektrum AR637TA+ receiver with full-range telemetry and industry-leading DSMX® technology
Receiver loaded with a Smart Transmitter Model File that allows you to import all settings for NX and iX series transmitters during the binding process
Easier to fly with innovative and optional-use SAFE Select flight envelope protection
The unmatched stability and locked-in feel of exclusive and enhanced AS3X+ technology
Six factory-installed digital, metal-geared servos with precise ball-link equipped linkages
Functional flaps for shorter takeoffs and landings plus improved slow-flight performance
Larger, more durable and reliable electric retracts with sprung wire struts for operation from a variety of surfaces including short grass
No glue required for assembly – six bolts and it can be ready to fly in less time than it takes to charge a battery
Strong and easy to install/remove one-piece composite reinforced wing with hands-free servo connection system
Bolt-on wing and stab for extremely quick and easy assembly/disassembly and for convenient storage/transport
Higher-density EPO results in a stronger and stiffer airframe with a smoother, dent and damage resistant finish
Factory-finished in a higher visibility color scheme with improved decals and finish for better orientation
Large and convenient, magnetically-secured top hatch and large battery compartment
Skill Level 2 – Some Experience Required
Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up, and fly similar class models. You should have the experience and skills necessary to successfully fly models like the E-flite ElectroStreak 1.1m, Sportix 1.1m, Conscendo Evolution 1.5m, 1.2m to 1.5m warbirds, 64mm and larger EDF, or other similar class models before attempting to fly the V1200 1.2m BNF Basic version.
Exclusive Technologies
This BNF Basic version V1200 1.2m is equipped with a factory-installed Spektrum AR637TA+ receiver that features exclusive Spektrum AS3X+ and SAFE Select technologies. Enhanced AS3X+ works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch! If you don't want to enable the SAFE Select features, simply bind the receiver normally, and only AS3X+ will be active.
Bind-N-Fly® Completion Level Advantage
Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos and a Spektrum 2.4GHz receiver installed so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly!
Smart Transmitter File
This BNF aircraft is equipped with a receiver that is loaded with a Smart Transmitter File (STF) that makes programming your transmitter as easy as a few clicks of a button. When you bind your transmitter to an STF-equipped aircraft, all programming parameters download automatically from the receiver. Switch assignments, rates, expo, telemetry, and voice callouts configure themselves. No lengthy step-by-step instructions. No continual adjustments. Just push-button convenience that gets you flying faster.
Smart Technology
The V1200 1.2m is equipped with an exclusive Spektrum Avian Smart ESC that can provide a variety of real-time power system related telemetry data including overall battery voltage and more – with Smart and non-Smart batteries – via compatible receivers (including the AR637TA+ installed in the BNF Basic version) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly.
Versatile Brushless Power
The V1200 is factory-equipped with a high-power brushless power system that gives you the option to choose just how fast you want to go. Simply drop in a 4S 3200mAh to 5000mAh battery to reach level-flight speeds up to 110+ MPH with the included APC 10x8E propeller and aluminum spinner. Or, to go beyond that and reach top speeds up to 140+ MPH, install a 6S 3200mAh to 7000mAh battery-no modifications or upgrades necessary!
Functional Features
Operational flaps offer improved slow-flight capability and performance while also making it possible to take off and land in shorter distances and at slower speeds. Larger, more durable and reliable electric retracts with sprung wire struts make it possible to fly from a variety of surfaces including pavement, dirt and short grass.
Strength and Precision
Speed is nothing without the right balance of strength and precise control. The V1200's stunning and sleek airframe is molded in special, higher-density EPO that results in a stronger and stiffer airframe with a smoother, dent and damage resistant finish. It's also composite reinforced including multiple carbon fiber spars throughout the wing, fuselage and tail. Plus, it's equipped with digital, metal-geared servos that deliver the precise control and reliability you need to enjoy flying FAST flight after flight.
Easy Assembly
No glue is required for assembly and you can have the V1200 ready to fly in less time than it takes to charge a battery! With a total of six screws, the stabs and the one-piece wing bolt into place and can easily be removed for convenient storage and transport.
Contents
E-flite V1200 1.2m with:
Spektrum Digital, Metal-Geared Servos (installed)
Spektrum Brushless Outrunner Motor (installed)
Spektrum Avian 100-Amp Smart Brushless ESC (installed)
Spektrum AR637TA+ 6-Channel Receiver with AS3X+ and SAFE Select (installed)
Product Manual
Requires
Full-range 6–7+ channel Spektrum DSMX/DSM2 compatible transmitter
4S 14.8V to 6S 22.2V 3200–7000mAh LiPo with EC5 or IC5 Connector
Compatible LiPo charger
ARRMA
ARRMA ARA8306 TLR Tuned Typ...
$739.95
Race-ready with high-end upgrades
Loaded with high-end parts for improved strength, handling, and long-term durability, the 1/8 scale ARRMA® TLR® Tuned TYPHON™ 4WD Race Buggy Roller provides bashers with the perfect platform for entering competitive racing and experimenting with their chassis to achieve the best performance.
The large number of TLR® Tuned parts and the factory-finished body with bold racing color scheme immediately set this model apart from its ready-to-run TYPHON™ 6S BLX 4WD Speed Buggy brother. The TLR® Tuned TYPHON™ 4WD Race Buggy Roller is the ultimate ARRMA® 1/8 scale buggy straight out of the box, primed and ready to hit the racetrack — and still tough enough to handle off-road bashing. Just add your choice of 4S or 6S brushless power system and the TLR® Tuned TYPHON™ will blast over rough terrain with ease.
The durable TLR® Tuned aluminum upgrades include the chassis plate, steering rack, adjustable upper and lower suspension hangers, shock bodies, and front and rear shock towers. All are laser-etched with the TLR® Tuned logo. The chassis also features strong composite side pods and front and rear braces. The oil-filled, adjustable shocks have machined tapered pistons and Extreme Bash (EXB) stand-offs.
The TLR® Tuned TYPHON™ 4WD Race Buggy Roller also features a heavy-duty drivetrain that holds up to extreme bashing, with all-metal diff outdrives and gearbox internals plus durable steel driveshafts throughout. Its extra-strong wheel hubs support low-drag wheels on which ARRMA® engineers have mounted multi-terrain, race compound dBoots® Exabyte tires for next-level grip. A Race Spec tunable rear wing helps to keep the tires and buggy grounded, contributing to confident control and responsive handling at high speeds.
Maintenance downtime is kept to the minimum with an efficient, driver-friendly design. For example, an aluminum sliding mount gives you fast, hassle-free access to your motor.
The 1/8 scale TLR® Tuned TYPHON™ 4WD Race Buggy Roller is the ultimate ARRMA® buggy. For intermediate-level bashers interested in racing, it offers top-of-the-line durability and tuning capabilities to give you a successful head start.
TLR® TUNED PARTS
The TLR® Tuned TYPHON™ 4WD Race Buggy Roller has been upgraded with high-end aluminum parts that increase durability and improve handling. For intermediate-level bashers, it's the perfect platform to use for racing and to gain experience with tuning — Designed Fast and Designed Tough!
OIL-FILLED SHOCKS
The adjustable oil-filled shocks are mounted on TLR® Tuned 7075-T6 Aluminum Shock Towers and feature TLR® Tuned Aluminum Shock bodies, machined tapered shock pistons, and EXB Extreme Bash shock stand-offs. They easily soak-up bumps over dirt, asphalt, and grass for super-smooth damping.
HIGH-TRACTION dBoots® EXABYTE TIRES
The dBoots® Exabyte tires are made of high-quality, race compound rubber for long-lasting durability and feature a multi-surface tread pattern for excellent traction in all conditions. They include foam inserts and are pre-glued to low-drag, 1/8 buggy nylon wheels. The 17mm hex fitting provides strength during extreme action and allows easy maintenance.
RACE SPEC FINISHED BODY
Topping off the TLR® Tuned TYPHON™ 4WD Race Buggy Roller is a sleek, factory-finished body featuring exclusive Race Spec colors and decals. A low-drag, tunable rear wing helps keep the buggy grounded, contributing to confident control and responsive handling at thrilling high speeds.
TLR® Tuned Features
TLR® Tuned 7075-T6 Laser-Etched Aluminum Chassis Plate
TLR® Tuned 7075-T6 Laser-Etched Aluminum Front and Rear Shock Towers
TLR® Tuned 7075-T6 Laser-Etched Aluminum Steering Rack
TLR® Tuned Laser-Etched Aluminum Lower Adjustable Suspension Hangers
TLR® Tuned Laser-Etched Aluminum Upper Adjustable Suspension Hangers
TLR® Tuned Laser-Etched Aluminum Shock Bodies
Features
Strong front and rear composite chassis braces
Strong composite chassis side pods
Rear suspension dirt guards
Oil-filled adjustable shocks
Machined tapered shock pistons
EXB Extreme Bash shock stand-offs
Heavy-duty drivetrain
All-metal diff outdrives and gearbox internals
Durable steel driveshafts throughout
Galvanized turnbuckles
X-Hard servo saver spring
Black anodized aluminum easy-access sliding motor mount
Black aluminum servo mount
Race Spec high rear wing mount
Race Spec tunable rear wing
Factory-finished Race Spec body colors and decals
dBoots® Exabyte race compound tires
Low-drag 1/8 buggy wheels
Aluminum 17mm wheel hex
2-year warranty (see website support for details)
Contents
(1) ARRMA® TLR® Tuned TYPHON™ 1/8 Race Buggy 4WD Roller
(1) 1/8 TLR Tuned TYPHON 4WD Roller Manual
Requires
(1) 2+ Channel Transmitter and Receiver
(1) Metal Gear, Hi-Torque Steering Servo
(1) Electronic Speed Control
(1) Motor
(1) LiPo Battery
(1) Compatible LiPo Battery Charger
(1) Pinion Gear
E-FLITE
E-Flite Habu STS 70mm EDF J...
$727.95
The E-flite® Habu STS 70mm EDF is the easiest to fly RC jet EVER. Featuring exclusive SAFE® technology with Beginner, Intermediate and Experienced flight modes, it's the ONLY jet new pilots can succeed with as their first ever RC plane!
YOU CAN FLY A JET!
Nearly everyone who sees a radio controlled (RC) jet tear across the sky has the same reaction: "I want to fly one of those!" But because of their speed and handling challenges, RC jets have been almost impossible for first-time or low-time RC pilots to fly successfully — until now. Thanks to the E-flite® Habu STS (Smart Trainer with SAFE®) 70mm EDF jet, you can actually learn to fly RC airplanes successfully with a jet! The Habu STS 70mm EDF is based on the legendary Habu, one of the best high-performance Electric Ducted Fan (EDF) sport jet platforms ever created. E-flite® engineers optimized the design to improve its low-speed handling and slow speed performance and added options for taking advantage of exclusive Spektrum™ SAFE® flight assistance technology. As a result, the Habu STS 70mm EDF is the easiest to fly RC jet EVER, and the perfect choice to satisfy any RC pilot's desire to fly a jet!
OPTIMIZED FOR EASY FLIGHT
Engineered for improved low speed handling and performance to make flying and landings easier, the E-flite® Habu STS (Smart Trainer with SAFE®) 70mm EDF makes it possible to succeed in learning to fly with a jet as your first ever radio controlled (RC) airplane! Based on one of the best Electric Ducted Fan (EDF) sport jets ever designed, it's been optimized with the addition of SAFE® (Sensor Assisted Flight Envelope) technology featuring Beginner, Intermediate and Experienced flight modes to make it easy to fly successfully, especially with the help of an instructor. Wide-stance tricycle landing gear with a steerable nose wheel and oversized tires allows for takeoffs and landings on surfaces ranging from paved runways to grass and even dirt, plus you can install the optional Landing Assist Sensor (LAS) that automatically "flares" for smoother landings to make learning to land even easier! Best of all, the durable EPO airframe assembles quickly and easily without the need for glue or special tools — which means you can be ready to fly in less time than it takes to charge a battery.
This Ready-To-Fly (RTF) Basic version includes everything needed to fly in one box except for a battery and charger. This allows you to choose a convenient and money-saving Spektrum™ Powerstage™ bundle or the separate battery and charger you prefer! The powerful brushless power system including a telemetry-capable ESC and the servos are all factory-installed. Plus the included Spektrum DXS 2.4GHz transmitter can be used with other Bind-N-Fly® (BNF) and BNF Basic aircraft after you learn to fly the Habu STS successfully!
And the fun doesn't stop after you learn how to fly! In the Experienced Mode, the Habu STS 70mm EDF is capable of performing aerobatic maneuvers including loops, rolls, inverted (upside down) flight and more. You can use a 3S 3200mAh to 4000mAh battery for an excellent balance of power and flight time, or you can install a compatible 4S battery for more speed and thrust without the need for any modifications or upgrades!
You can also purchase the RealFlight® Trainer Edition RC Flight Simulator and a Spektrum WS2000 Wireless Simulator Dongle (both sold separately) to fly this and other models using the transmitter included with the RTF Basic version! The simulator features six popular Horizon Hobby® trainer aircraft, including the Habu STS 70mm EDF jet, and built-in Virtual Flight Instructor lessons. This helps new pilots learn to fly successfully by practicing on a PC at home or on a laptop just about anywhere else!
Ready-To-Fly Basic Flexibility
This Ready-To-Fly (RTF) Basic version includes a Spektrum™ DXS controller/transmitter equipped with industry-leading DSMX® 2.4GHz technology and everything else you need to fly except for a rechargeable lithium polymer battery and charger for the airplane. The convenient and money-saving Spektrum™ Powerstage 3 bundle (SPMXPSA300) includes a compatible 3S 4000mAh Smart G2 LiPo battery and an S120 USB-C Smart charger that can be used with a variety of USB power sources. Or you can choose the separate 3S or 4S 3200–4000mAh battery and compatible charger you prefer!
Uniquely Optimized
Jets are typically faster and harder to fly than most of their prop-driven counterparts, which made it impossible for first-time, and even low-time, RC pilots to fly them – until now! The unique and optimized airframe design of the Habu STS improves low speed handling and slow speed performance to finally make it possible to learn to fly radio controlled (RC) airplanes successfully with a jet.
High Power
The factory-installed brushless power system features a 70-amp telemetry-capable ESC plus a specially-tuned motor and 10-blade 70mm fan that delivers an abundance of thrust with a 3S LiPo battery, or more power and speed with a 4S battery without the need for any modifications or upgrades.
Durable Design
Construction with advanced EPO material delivers a lightweight yet durable airframe that's tough enough to handle everyday flying punishment without getting bent out of shape. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement parts is readily available.
Easy Assembly
The Habu STS 70mm EDF arrives mostly factory-assembled with the power system, servos plus the flight controller and receiver installed. All you need to do is finish some quick and easy final assembly, without the use of glue or special tools, and you'll be ready to fly in less time than it takes to charge a battery!
Capable Gear
The wide-stance tricycle landing gear with a steerable nose wheel and oversized tires offers improved ground handling for easier take offs and landings on a wide variety of surfaces from paved runways to grass and even dirt.
Flight School Qualifying Trainer
This trainer model qualifies for use in the Horizon Hobby Flight School. As a trainer, this plane needs minimal preparation to be flight-ready. It also includes SAFE® (Sensor Assisted Flight Envelope) technology to help new pilots control their models. Purchase this item along with a three-month AMA trial membership to get started.
Features
Unique and optimized airframe design improves low speed handling and slow speed performance, making it possible to learn to fly radio-controlled (RC) airplanes successfully with a jet
Based on one of the best first and high-performance EDF (Electric Ducted Fan) jet platforms ever designed — the legendary Habu
Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly
Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
Panic Recovery mode at the push of a button to prevent loss of control and crashes
Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
Includes almost everything needed to fly except for a compatible LiPo battery and charger (sold separately)
Use a 3S 3200-4000mAh battery for excellent performance overall, or a 4S battery for more power and speed
Spektrum™ DXS controller/transmitter with industry-leading DSMX® 2.4GHz technology for reliable control without interference
Spektrum flight controller and serial receiver with fly-by telemetry capability
Powerful brushless electric power system with 70mm 10-blade fan
3S and 4S compatible 70-amp telemetry-capable ESC
Five (5) factory-installed servos and linkages
Oversized tires for operation from a variety of surfaces including grass
Wide-stance tricycle landing gear with steerable nose wheel
Quick and easy assembly — no glue or special tools required
Lightweight yet strong and durable EPO construction
Full line of replacement/spare parts available
Practice flying this aircraft in the RealFlight® simulator (sold separately)
Contents
(1) E-flite® Habu STS 70mm EDF
(1) Brushless Outrunner Motor (installed)
(1) 70A Brushless ESC (installed)
(5) Sub-Micro Servos (installed)
(1) Spektrum™ 3230B Flight Controller (installed)
(1) Spektrum 4650C Serial Receiver (installed)
(1) Spektrum DXS DSMX® 2.4GHz Transmitter
(1) Product Manual
Requires
(1) 3S 11.1V or 4S 14.8V 3200–4000mAh LiPo Battery with EC3™ or IC3® Connector*
(1) Compatible LiPo Charger*
*The recommended Spektrum™ Powerstage™ 3 bundle (SPMXPSA300) includes a compatible 3S 4000mAh Smart G2 LiPo battery and S120 USB-C Smart charger that can be used with a variety of USB power sources.
TAMIYA
Tamiya 47498 1/10 RC 4WD TA...
$720.95
The TA08PRO receives the limited-edition treatment in the form of the TA08R by adding a plethora of key Hop-Up Options right out of the box along with a few parts only available in this edition!
Included Hop-Up Option Parts
51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.)
22004: TA08 Aluminum Servo Mount
22005: TA08 Carbon Damper Stays (Front & Rear)
22016: TA08 Low Friction King Pin Balls (4pcs.)
42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.)
42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.)
42346: TRF420 Wheel Axles (2pcs.)
42351: TRF420 Center Pulley
42357: Cross Joints for Low Friction Assembly Universal Shafts
42359: VG O-Rings for Oil Dampers (30°)
42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.)
42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.)
42374: VG O-Rings for Gear Differentials (40°)
53823: Clamp Type Aluminum Wheel Hub (5mm Thick)
53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)
53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.)
54121: Aluminum Horn for High Torque Servo Saver
54642: 4mm Flange Lock Nut (Black, 8pcs.)
51647: TRF420 Aluminum Front Direct Cups (2pcs.)
54704: TA07 Aluminum Steering Arm Set
54881: Aluminum Adjustable Suspension Mount (A)
54883: Aluminum Adjustable Separate Suspension Mounts (XB)
54884: Aluminum Adjustable Separate Suspension Mounts (A)
54949: TA07 Adjustable Ackerman Set
Features
1/10 scale R/C touring car chassis kit.
NEW-The 2.0mm carbon fiber upper deck connects front and rear bulkheads for pitch rigidity and utilizes a 630-ball bearing at the rear for roll rigidity.
NEW-Front and rear aluminum upper arm mounts provide enhanced rigidity.
NEW-The aluminum motor mount has two screw-attached, upper deck attachment points.
NEW-Rear body mount uses carbon fiber plates and aluminum posts, and limits body wobble and ensures stable rear traction. Body mount extensions (from Item 54604) allow attachment of bodies of different heights.
NEW-Additional ribs on the lower deck limit its deformation for superior suspension performance and help limit damage after unexpected crashes.
Gear units are front direct pulley (aluminum direct coupling) and rear gear differential (aluminum differential joint). Item 42351 TRF420 Center Pulley and 71T spur gear are used at the center for stability even under high load.
The drive shafts are double cardan shafts at the front and lightweight universal shafts at the rear.
Front aluminum pipes and cross joints are lightweight aluminum.
NEW-Aluminum wheel hubs limit wheel deformation and ensure stable tire grip.
Comes with 43mm swing shafts, Super Short Big Bore size dampers and front and rear carbon fiber damper stays, plus adjustable suspension mounts.
The model comes in a convenient carry case.
Requires
2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with compatible charger, tires, and body.
TAMIYA
Tamiya 1/10 Avante 2011 Bla...
$720.95
Mini 4WD Special Enlarged
This updated, re-released version of Tamiya's legendary 1988 Avante buggy features the cool color scheme of the Mini 4WD Avante Black Special. It comes equipped with hybrid spike tires mounted on vivid fluorescent pink lightweight wheels to add to its eye-catching appearance.
Select Options Included
The shaft-driven 4WD chassis features carbon fiber upper/lower decks (2mm) and rear damper stay (3.5mm) which ensure superb strength. Front/rear ball differentials and center torque splitter help provide sure-footed traction. Racing steering set with 2mm thick carbon fiber plate offers linear steering response. 4-wheel double wishbone suspension with metal shafts and oil dampers allows a high degree of setting customization. Aluminum front knuckles feature the same shape as those on the original Avante and radius arm protector absorbs shocks to prevent damage to suspension arms. A total of 26 ball bearings contribute to the model's smooth power.
Features
2mm carbon fiber double deck chassis secures excellent performance for this off-road racer.
Racing steering set features a 2mm thick carbon fiber plate as standard in this kit.
25T Type 540 motor features a dedicated sticker designed for the Avante (2011) Black Special.
Vibrant fluorescent pink molded wheels add a splash of color to the overall look.
Requires
2-Channel R/C System w/ESC
R6/AA/UM3 batteries for transmitter
Battery Pack & Charger
E-FLITE
E-Flite EFL178500 F-16 Thun...
$719.99
The Lockheed Martin F-16 is one of the most popular and recognizable single-engine fighters in the world. Its amazing performance and capabilities are why the world-renowned U.S. Air Force Thunderbirds demonstration team chooses to operate it with distinction at airshows around the globe. The E-flite® F-16 Thunderbirds 70mm EDF is a scale replica that delivers incredible performance while also being easier to take off and land than other similar class models because this Bind-N-Fly Basic model is equipped with exclusive AS3X® and SAFE® Select technologies. This updated and upgraded version also includes a higher performance Spektrum motor and 85A Avian Smart Lite ESC for added speed and vertical performance, plus delivers real-time telemetry data via the AR631 receiver!
The E-flite® F-16 Thunderbirds 70mm EDF jet is a scale replica of the iconic aircraft flown by the U.S. Air Force Thunderbirds demonstration team. Like the full-scale airshow thriller, this F-16 has an incredibly wide performance envelope—from slow and stable high-alpha flight to amazing high-speed and vertical capabilities. At the core of this updated and upgraded version is a higher-performance 6S-compatible brushless motor plus an 85-amp ESC that are matched to a 12-blade fan to deliver an abundance of speed, thrust, and a turbine-like sound. Factory-installed electric retracts with shock-absorbing struts make it possible to take off from and land on a variety of surfaces, including manicured grass, while keeping ground handling smooth and delivering a realistic scale experience. The composite-reinforced EPO airframe is lightweight yet strong, and the digital, metal-geared servos plus ball-link equipped linkages provide precise control. And it all combines to deliver one of the easiest to fly, yet highest performance, most capable and feature-rich mid-sized F-16 models ever!
This BNF® Basic version model includes a factory-balanced and installed 12-blade 70mm fan, matched to a larger 1900Kv brushless inrunner motor, plus an 85-amp Avian Smart Lite ESC that work together to deliver an abundance of speed and thrust. With this updated and upgraded power system, the F-16 70mm now has even better vertical performance and more speed than the previous version making it capable of level flight top speeds well over 100 MPH and nearly unlimited vertical performance with 6S 3200mAh to 4000mAh batteries. It’s also equipped with a factory-installed Spektrum AR631 receiver featuring exclusive AS3X and optional-use SAFE Select technologies. When using compatible AirWare-equipped transmitters, the receiver and Smart Lite ESC supply overall battery voltage, current draw, motor RPM, and other telemetry data in real-time — with Smart and non-Smart batteries. And with a 7+ channel transmitter, you can also take advantage of the optional-use thrust reversing to shorten rollouts after landing and for other special ground handling capabilities.
Features
Updated and upgraded with a higher performance power system, Smart electronics, plus optional-use thrust reversing
The easiest to fly high-performance “full-house” F-16 EDF (Electric Ducted Fan) jet model yet
Scale replica of the iconic aircraft flown by the U.S. Air Force Thunderbirds demonstration team
12-blade 70mm fan delivers excellent top speed and vertical performance plus a turbine-like sound
Upgraded and factory-installed 6S-compatible 3060-1900Kv brushless inrunner motor plus 85A ESC
Extremely wide performance envelope and speed range, capable of top speeds up to 100+ MPH
Popular 6S 3200–4000mAh 30+C batteries deliver excellent performance and flight times
85-amp Spektrum Avian Smart Lite ESC provides real-time battery voltage, current draw, RPM, and other data – with Smart and non-Smart batteries – via compatible transmitters
Optional-use thrust reversing to help shorten rollout after landing and for other special ground handling capabilities
Spektrum AR631 receiver with fly-by range telemetry and industry-leading DSMX® technology
Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X® technology
Steerable nose wheel and electric retracts with shock-absorbing struts for operation from a variety of surfaces
Six fast and precise digital, metal-geared servos with ball-link equipped linkages
Plastic capped strakes for added durability to prevent damage and paint chipping
Includes a decal sheet to apply the Thunderbird number designation of your choice
Easy final assembly with removable wings and a magnetically-secured nose cone
Convenient top hatch with clear canopy, cockpit detail, and a pilot figure
Durable yet lightweight, composite-reinforced EPO airframe
Exclusive Technologies
This mid-sized F-16 model is equipped with exclusive Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you’re flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch! And if you don’t want to enable the SAFE Select features, simply bind the receiver normally and only AS3X will be active.
Smart Technology
The exclusive Spektrum Avian Smart Lite ESC provides a variety of real-time power system-related telemetry data including overall battery voltage, current draw, motor RPM, and more – with Smart and non-Smart batteries – via compatible receivers (including the AR631) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly. Plus, optional-use motor/thrust reversing can help shorten rollout after landing and offers other special ground handling capabilities (7+ channel transmitter required for reversing).
Higher Performance
The 12-blade 70mm fan, upgraded 1900Kv brushless inrunner motor and 85-amp ESC combine with your 6S 3200–4000mAh 30+C LiPo battery to deliver nearly unlimited vertical performance and a fantastic speed range with virtually instantaneous throttle response. But what makes the experience truly rewarding is the amazing sound produced by the power system—it’s almost like a real turbine engine.
Capable Gear
The steerable nose wheel and main gear feature reliable electric retract units equipped with metal components to deliver excellent ground handling. Plus, the shock-absorbing struts make it possible to operate from a variety of paved, dirt and even some manicured grass surfaces.
Durable Precision
The lightweight yet durable EPO airframe is composite-reinforced for added strength and stiffness, which combines with the factory-installed digital, metal-geared servos with ball-link equipped linkages to deliver crisp and precise control at every speed.
Unmatched Maneuverability
The F-16's unique design offers incredible handling through a wide flight envelope and speed range. It's capable of rock-solid high-speed flight so you can perform locked-in low-level flybys and aerobatic maneuvers including giant loops, point rolls, and more. It’s also capable of slowing down to deliver smooth and stable high-alpha flight and for easier landings.
Contents
(1) E-flite F-16 Thunderbirds 70mm EDF with:
(1) Spektrum Avian 85A Smart Lite Brushless ESC (installed)
(1) Spektrum 1900Kv Brushless Inrunner Motor (installed)
(6) Spektrum Digital, Metal-Geared Servos (installed)
(1) Spektrum AR631 6-Channel Receiver (installed)
Requires
Full-range 6–7+ channel Spektrum DSMX®/DSM2® compatible transmitter
6S 22.2V 3200–4000mAh 30+C LiPo with EC5 or IC5 Connector
Compatible LiPo charger
ARRMA
Arrma Outcast V2 4X4 BLX 4S...
$717.95
$899.99
Loaded with legendary ARRMA toughness and speed, the 1/10 scale OUTCAST 4S BLX Stunt Truck is capable of more than simple off-road bashing. Its short 12.32 inch wheelbase allows flips and makes it easy to maneuver nimbly through obstacles and terrain.
Built on the latest evolution of the 4S BLX platform — the affordable middle ground between agile 3S BLX vehicles and bigger, more powerful 6S BLX machines — this version of the OUTCAST is ready for amped-up, all-road blasting and stunting! It turns up the dial on the stunt truck’s capabilities so anyone can experience next-level ARRMA handling, performance, and speed.
The updates drivers have wanted most are included, starting with a strengthened, diff compatible chassis. The ARRMA OUTCAST 4S BLX now has a center diff module that holds an aluminum-cased center differential. Whatever the surface conditions are, the center diff helps you grab the ultimate traction. And with wishbone dirt guards, outdrive protectors, and taller side guards providing added defense against dirt and debris, the OUTCAST 4S BLX stands up to furious blasting and stunting over off-road or paved surfaces with equal ease.
ARRMA has also amped up the OUTCAST stunt truck’s 4S-capable Spektrum brushless power system for more intense all-road action. A cool-running Spektrum Firma 120A Smart V2 waterproof ESC with IC5 connectors (EC5 compatible) adds punch and improves the driving feel. Steering has been strengthened with a Spektrum S662 metal-geared digital servo that includes an alloy center case. Its higher torque sharpens the truck’s maneuvering capabilities at high speeds.
These updates join a large number of proven ARRMA 4S BLX features — from high shock towers, long oil-filled shocks, and wide arms for plush suspension travel, to steel diff gears and EXtreme Bash CVD front and rear driveshafts for unstoppable power delivery. The OUTCAST 4S BLX also incorporates the popular ARRMA easy-access modular design to make routine maintenance fast and simple.
Made of high-quality rubber, the vented dBoots BACK-FLIP LP tires have an aggressive tread pattern that finds a solid grip on a wide range of surfaces. The vintage truck body has a tough, injection-molded rear wing and comes factory-finished in your choice of two fresh color schemes. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
Everything in the durable design contributes to confident control and responsive handling for whatever eye-popping stunts you can imagine. Fully ready-to-run, the ARRMA OUTCAST 4S BLX Stunt Truck comes with a 3-channel Spektrum SLT3 2.4GHz radio and dual protocol SR315 receiver. Just charge up and pop in your choice of recommended battery and you’re ready to start showing off powerful new stunts!
Key improvements
Metal center differential for improved traction
Updated chassis with center diff module, hinge pin bracing, and dirt drain
Outdrive protectors, taller side guards, and wishbone dirt guards
Higher torque Spektrum S662 metal-geared digital servo with alloy case center
Cooler running Spektrum Firma 120A V2 Smart ESC
Improved battery retention system with wire clips
Additional proven features
Fully assembled, finished, and ready-to-run
Spektrum SLT3 2.4GHz transmitter and dual protocol SR315 receiver
Spektrum Firma 3668 2400Kv brushless motor with ARRMA heatsink and cooling fan
EXB all-metal gear diffs
EXB CVD front and rear driveshafts
Wide 17.72 inch front and rear track for aggressive bashing
Long 20.28 inch chassis for stability and control
Shorter 12.32 inch wheelbase for stunt capabilities
Rubber shielded bearings throughout
Center support brace for maximum durability
Double wishbone front and rear suspension
Oil-filled aluminum shocks with silicone O-rings
High shock towers for longer travel
Steering system with stone clearance
Tough black multi-spoke wheels
CNC machined, red anodized 17mm wheel hubs
Vented multi-terrain dBoots BACK-FLIP LP low-profile tires
Adjustable turnbuckles
Adjustable ride height
Adjustable body mounts
Front bumper and protective lower front and rear skid plates
Wheelie bar with rubber tires
2-Year limited warranty (see website for details)
METAL CENTER DIFFERENTIAL
All-metal EXB gear diffs give the OUTCAST 4S BLX Stunt Truck EXtreme Bash durability. An aluminum-cased center differential has also been added that provides the ultimate traction in any surface conditions.
MODULAR CHASSIS DESIGN
Separate, easily removable chassis modules for the power system, electronics and differential components make routine maintenance fast and simple. The OUTCAST 4S BLX chassis has been updated to accept a center diff module, and also now includes hinge pin bracing and a dirt drain.
OIL-FILLED SHOCKS
Long, aluminum-bodied, oil-filled shocks with silicone O-rings are mounted on high shock towers. These plus wide suspension arms give the OUTCAST 4S BLX the plush suspension travel needed to soak up bumps.
INCREASED DIRT PROTECTION
With dirt guards for the wishbones, outdrive protectors, and taller side guards all added for extra protection against the elements, the OUTCAST 4S BLX is better prepared than ever for high-speed, all-road blasting.
FINISHED TRUCK BODY
The sleek truck body features a tough, injection-molded rear wing and comes factory-finished in your choice of two exciting color schemes. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
dBOOTS BACK-FLIP LP TIRES
The durable, low-profile dBoots BACK-FLIP LP tires with medium-compound foam inserts offer long-lasting performance and feature an aggressive tread pattern for excellent traction on a wide range of surfaces. The tires are mounted on tough, 3.8” MT wheels with CNC-machined, red anodized 17mm hubs.
SPEKTRUM S662 STEERING SERVO
The installed Spektrum S662 digital, waterproof steering servo easily handles the demands of high-speed, all-road blasting with full metal gears and high torque (236 oz-in @ 7.4V). It also features an industry-standard 25T spline servo horn.
SPEKTRUM BRUSHLESS POWER SYSTEM
The brushless power system includes an efficient Spektrum Firma 2400Kv brushless motor matched to an updated, cool-running Spektrum Firma 120A Smart V2 waterproof ESC with IC5 connectors (also compatible with EC5 connectors).
SPEKTRUM SLT3 2.4GHz 3-CHANNEL TRANSMITTER
The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free bashing and has a foam wheel for precise fingertip control. Using the throttle limiting function, new RC drivers can limit top speed to 50% or 75% of the monster truck’s full potential until they’re ready to unleash it all.
SPEKTRUM SR315 3-CHANNEL DUAL PROTOCOL RECEIVER
Compatible with SLT and DSMR protocols, the included Spektrum SR315 3-channel receiver offers outstanding range and fast response rate. It’s also Smart telemetry compatible (in DSMR mode and using the Spektrum Dashboard app).
Contents
(1) ARRMA OUTCAST 4S BLX 4WD 1/10 Scale Stunt Truck RTR
(1) Spektrum Firma 120A V2 Smart Waterproof* ESC
(1) Spektrum Firma 3668 2400Kv Brushless Motor
(1) Spektrum S662 Metal-Geared Waterproof* Digital Servo
(1) Spektrum 2.4GHz SLT3 Transmitter & SR315 Receiver
(4) AA Batteries
(1) Instruction Manual
Requires
(2) 2S, (1) 3S, or (1) 4S Hardcase LiPo Battery
(1) Compatible Charger
ARRMA
Arrma Outcast V2 4X4 BLX 4S...
$717.95
Loaded with legendary ARRMA toughness and speed, the 1/10 scale OUTCAST 4S BLX Stunt Truck is capable of more than simple off-road bashing. Its short 12.32 inch wheelbase allows flips and makes it easy to maneuver nimbly through obstacles and terrain.
Built on the latest evolution of the 4S BLX platform — the affordable middle ground between agile 3S BLX vehicles and bigger, more powerful 6S BLX machines — this version of the OUTCAST is ready for amped-up, all-road blasting and stunting! It turns up the dial on the stunt truck’s capabilities so anyone can experience next-level ARRMA handling, performance, and speed.
The updates drivers have wanted most are included, starting with a strengthened, diff compatible chassis. The ARRMA OUTCAST 4S BLX now has a center diff module that holds an aluminum-cased center differential. Whatever the surface conditions are, the center diff helps you grab the ultimate traction. And with wishbone dirt guards, outdrive protectors, and taller side guards providing added defense against dirt and debris, the OUTCAST 4S BLX stands up to furious blasting and stunting over off-road or paved surfaces with equal ease.
ARRMA has also amped up the OUTCAST stunt truck’s 4S-capable Spektrum brushless power system for more intense all-road action. A cool-running Spektrum Firma 120A Smart V2 waterproof ESC with IC5 connectors (EC5 compatible) adds punch and improves the driving feel. Steering has been strengthened with a Spektrum S662 metal-geared digital servo that includes an alloy center case. Its higher torque sharpens the truck’s maneuvering capabilities at high speeds.
These updates join a large number of proven ARRMA 4S BLX features — from high shock towers, long oil-filled shocks, and wide arms for plush suspension travel, to steel diff gears and EXtreme Bash CVD front and rear driveshafts for unstoppable power delivery. The OUTCAST 4S BLX also incorporates the popular ARRMA easy-access modular design to make routine maintenance fast and simple.
Made of high-quality rubber, the vented dBoots BACK-FLIP LP tires have an aggressive tread pattern that finds a solid grip on a wide range of surfaces. The vintage truck body has a tough, injection-molded rear wing and comes factory-finished in your choice of two fresh color schemes. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
Everything in the durable design contributes to confident control and responsive handling for whatever eye-popping stunts you can imagine. Fully ready-to-run, the ARRMA OUTCAST 4S BLX Stunt Truck comes with a 3-channel Spektrum SLT3 2.4GHz radio and dual protocol SR315 receiver. Just charge up and pop in your choice of recommended battery and you’re ready to start showing off powerful new stunts!
Key improvements
Metal center differential for improved traction
Updated chassis with center diff module, hinge pin bracing, and dirt drain
Outdrive protectors, taller side guards, and wishbone dirt guards
Higher torque Spektrum S662 metal-geared digital servo with alloy case center
Cooler running Spektrum Firma 120A V2 Smart ESC
Improved battery retention system with wire clips
Additional proven features
Fully assembled, finished, and ready-to-run
Spektrum SLT3 2.4GHz transmitter and dual protocol SR315 receiver
Spektrum Firma 3668 2400Kv brushless motor with ARRMA heatsink and cooling fan
EXB all-metal gear diffs
EXB CVD front and rear driveshafts
Wide 17.72 inch front and rear track for aggressive bashing
Long 20.28 inch chassis for stability and control
Shorter 12.32 inch wheelbase for stunt capabilities
Rubber shielded bearings throughout
Center support brace for maximum durability
Double wishbone front and rear suspension
Oil-filled aluminum shocks with silicone O-rings
High shock towers for longer travel
Steering system with stone clearance
Tough black multi-spoke wheels
CNC machined, red anodized 17mm wheel hubs
Vented multi-terrain dBoots BACK-FLIP LP low-profile tires
Adjustable turnbuckles
Adjustable ride height
Adjustable body mounts
Front bumper and protective lower front and rear skid plates
Wheelie bar with rubber tires
2-Year limited warranty (see website for details)
METAL CENTER DIFFERENTIAL
All-metal EXB gear diffs give the OUTCAST 4S BLX Stunt Truck EXtreme Bash durability. An aluminum-cased center differential has also been added that provides the ultimate traction in any surface conditions.
MODULAR CHASSIS DESIGN
Separate, easily removable chassis modules for the power system, electronics and differential components make routine maintenance fast and simple. The OUTCAST 4S BLX chassis has been updated to accept a center diff module, and also now includes hinge pin bracing and a dirt drain.
OIL-FILLED SHOCKS
Long, aluminum-bodied, oil-filled shocks with silicone O-rings are mounted on high shock towers. These plus wide suspension arms give the OUTCAST 4S BLX the plush suspension travel needed to soak up bumps.
INCREASED DIRT PROTECTION
With dirt guards for the wishbones, outdrive protectors, and taller side guards all added for extra protection against the elements, the OUTCAST 4S BLX is better prepared than ever for high-speed, all-road blasting.
FINISHED TRUCK BODY
The sleek truck body features a tough, injection-molded rear wing and comes factory-finished in your choice of two exciting color schemes. Front and rear bumpers protect against impacts and a wheelie bar with rubber tires provides stunt potential.
dBOOTS BACK-FLIP LP TIRES
The durable, low-profile dBoots BACK-FLIP LP tires with medium-compound foam inserts offer long-lasting performance and feature an aggressive tread pattern for excellent traction on a wide range of surfaces. The tires are mounted on tough, 3.8” MT wheels with CNC-machined, red anodized 17mm hubs.
SPEKTRUM S662 STEERING SERVO
The installed Spektrum S662 digital, waterproof steering servo easily handles the demands of high-speed, all-road blasting with full metal gears and high torque (236 oz-in @ 7.4V). It also features an industry-standard 25T spline servo horn.
SPEKTRUM BRUSHLESS POWER SYSTEM
The brushless power system includes an efficient Spektrum Firma 2400Kv brushless motor matched to an updated, cool-running Spektrum Firma 120A Smart V2 waterproof ESC with IC5 connectors (also compatible with EC5 connectors).
SPEKTRUM SLT3 2.4GHz 3-CHANNEL TRANSMITTER
The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free bashing and has a foam wheel for precise fingertip control. Using the throttle limiting function, new RC drivers can limit top speed to 50% or 75% of the monster truck’s full potential until they’re ready to unleash it all.
SPEKTRUM SR315 3-CHANNEL DUAL PROTOCOL RECEIVER
Compatible with SLT and DSMR protocols, the included Spektrum SR315 3-channel receiver offers outstanding range and fast response rate. It’s also Smart telemetry compatible (in DSMR mode and using the Spektrum Dashboard app).
Contents
(1) ARRMA OUTCAST 4S BLX 4WD 1/10 Scale Stunt Truck RTR
(1) Spektrum Firma 120A V2 Smart Waterproof* ESC
(1) Spektrum Firma 3668 2400Kv Brushless Motor
(1) Spektrum S662 Metal-Geared Waterproof* Digital Servo
(1) Spektrum 2.4GHz SLT3 Transmitter & SR315 Receiver
(4) AA Batteries
(1) Instruction Manual
Requires
(2) 2S, (1) 3S, or (1) 4S Hardcase LiPo Battery
(1) Compatible Charger
KYOSHO
Kyosho 34118T1 Inferno Neo ...
$709.99
$749.00
Upgraded with even greater power!
Dynamic 1/8 EP buggy performance easy for beginners.
The impressive size and power of 1/8 scale buggies combines with drivability to make it a worldwide favorite of R/C racers. Despite its popularity, many beginners and intermediate drivers often find the 1/8 scale challenging due to the complexity of machine and the control required for top-level competition. This is where Readyset models are ideal as they are pre-assembled with the R/C system installed, providing a hassle-free introduction to the thrilling world of 1/8 scale buggy racing. Based on the famous Inferno series with its track record of World Championship success, this model delivers high-performance tuned for the ultimate speed rush, but with a user-friendly package that reduces the stress points on the driver. The newly released EP (electric) Inferno NEO 4.0 VE builds on the foundation of the previous 3.0 version with a more powerful motor, high-torque steering servo, and enhanced overall mechanics including a thickened front shock stay to increase crash resilience. The new body design is also a standout feature and comes available in two vibrant color schemes, so painting is not required. With the transmitter included all you need to get started are a battery and charger for the car, and AA size batteries for the transmitter. Now anyone can enjoy the thrill of dynamic 1/8 scale performance! Spare parts are readily available to repair any damage while style and performance can be upgraded even further with a wide range of optional parts for the Inferno series. The Inferno NEO 4.0 VE offers a comprehensive experience that satisfies drivers of all skill levels, from beginners to seasoned racers.
Features
Factory-finished Readyset includes pre-assembled chassis with R/C system installed and painted body so you can enjoy driving straight after purchase.
KT-231P+ Transmitter included. Features popular handle and pistol grip design for easy control.
Electric powered version has low running costs and is suitable for a wide range of driving conditions.
Full-Time 4WD system with shaft drive delivers excellent stability and reliability.
Durable aluminum main chassis exhibits the optimal balance of flexibility and high rigidity. Gray plastic sideguards add extra style element.
Battery mount and fastener is compatible with various battery sizes.
Double wishbone suspension provides ample front and rear suspension stroke.
Diaphragm oil shocks with proven stability and damping function. Shocks are factory filled and sealed.
Full bearing specifications include 18 ball bearings for smooth operation throughout the drivetrain.
1.0-module metal main gear is designed to withstand high loads.
Precision cut ring and pinion gears in both front and rear differentials produce superior drive efficiency.
High durability center diff features machine cut metal gears for increased strength and durability.
Compatible with existing Inferno series optional parts for setting adjustments and performance upgrades.
Based on the Inferno racing model, this Readyset comes fully equipped with R/C system and motor installed on the pre-assembled chassis for immediate enjoyment. Grey side guards add a sleek finish to the overall design.
The body has been newly designed specifically for this model and boasts excellent aerodynamics for superior handling. Choose from the line up of two vibrant color schemes which are complete with pre-cut sections and decals applied.
Includes the more powerful TORX8+ KV2300 KYOSHO SPEED HOUSE brushless motor unit that boosts speed for a thrilling ride.
High-torque KS5071-09MW servo is designed to handle the heavy loads of off-road driving. With its durable metal gears, this waterproof servo ensures reliable performance even when driving through puddles or wet conditions.
Special dust-proof receiver box that also functions as a servo mount protects the delicate receiver from sand, gravel, and other elements. A pin system allows the cover to be easily opened and closed, ensuring both protection and easy access.
Two-piece motor mount is easy to install and adjust gear backlash. The design securely holds the motor in place and ensures optimal gear mesh, even under intense vibrations while driving.
Large capacity big bore resin shocks provide excellent stability over rough surfaces. Setup can be changed to suit varying driving conditions with different tension Inferno shock springs.
Turnbuckles on suspension arms and steering rods allow quick and easy length adjustments by simply turning the rods for precision setup.
KC Cross Tires with motorcross-style block pattern are included as standard and deliver stable grip on both off-road terrain and paved surfaces.
Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench
Requires
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
KYOSHO
Kyosho 34108T2 1/8 Inferno ...
$709.99
$749.00
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control!
Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor & ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.
Features
Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
Full-time 4WD with low C of G 3-diff shaft drive.
Big Bore oil shocks & 4-wheel independent double wishbone suspension.
Full bearing specifications with 18 ball bearings on drive system and suspension.
Features thick suspension arms with high torsional rigidity.
Wide variety of optional parts is available to upgrade the chassis.
Equipped with 1.0 module metal main gear, designed for hard running.
Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.
Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.
KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.
KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.
Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.
Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.
Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.
Equipped with KC Cross Tires that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tires deliver exceptional performance on any surface.
High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.
Contents
Factory assembled chassis complete with control linkages
Finished body complete with printed color scheme
2.4GHz Syncro KT-231P+ transmitter
1.5、2.0、2.5、3.0mm L shaped hex wrenches
Cross wrench
17mm wheel wrench
Requires
4 x AA alkaline batteries for transmitter
Traveling battery
Charger
Stabilized power supply
Phillips screwdriver (large, small)
KYOSHO
Kyosho 34108T1 1/8 Inferno ...
$709.99
$749.00
Power and acceleration tests the bounds of common sense in a buggy that also features nimble control!
Factory assembled Inferno NEO 3.0 VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new brushless motor and ESC. The Syncro KT-231P+ transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful KYOSHO SPEED HOUSE brushless motor and ESC combines with big bore oil shocks and KC Cross tires to deliver superior performance on any surface. The Inferno NEO 3.0 VE allows anyone to test the bounds of common sense with powerful brushless motor acceleration.
Anodized Finish Aluminum
Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.
TORX8 Brushless Motor
KYOSHO SPEED HOUSE TORX8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.
BRAINZ8 ESC
KYOSHO SPEED HOUSE BRAINZ8 ESC with electric cooling fan features a 10-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.
Large Big Bore Shocks
Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.
Adjustable Alignment
Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.
KS5031-09MW Steering Servo
Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.
Lowered Chassis Height
Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.
KC Cross Tires
Equipped with KC Cross Tires that are designed with a block pattern seen in motocross bikes. Wear-resistant, these tires deliver exceptional performance on any surface.
Printed Body
High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.
Features
Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
Full-time 4WD with low C of G 3-diff shaft drive.
Big Bore oil shocks and 4-wheel independent double wishbone suspension.
Full bearing specifications with 18 ball bearings on drive system and suspension.
Features thick suspension arms with high torsional rigidity.
Wide variety of optional parts is available to upgrade the chassis.
Equipped with 1.0 module metal main gear, designed for hard running.
Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.
Contents
(1) 1/8 Inferno Neo3.0 VE 4WD Buggy RTR
(1) 2.4GHz Syncro KT-231P+ Transmitter
(4) L Shaped Hex Wrenches (1.5mm, 2.0mm, 2.5mm, 3.0mm)
(1) Cross Wrench
(1) 17mm Wheel Wrench
Requires
(4) AA Batteries for Transmitter
(2) 7.4V Batteries
(1) Battery Charger
KYOSHO
Kyosho 34801T1 1/10 KC10 To...
$699.95
Full-scale power in 1/10 size!
Next-generation high-performance R/C crawler
Experience the off-road adventure of crawling over rocky terrain and rugged trails in one of the most dynamic R/C categories. Kyosho’s 1/10 scale electric crawler Toyota Land Cruiser 60 is a striking blend of scale realism and serious off-road capability, powered by the all-new KC10 chassis.
At its core is a high-rigidity, pressed steel main frame paired with a sophisticated suspension setup incorporating 3-link front with lateral rod and 4-link rear system. Combined with a shaft-driven 4WD drivetrain, it delivers impressive crawling performance across the most challenging terrain.
The KC10 series gearbox comes standard in the Readyset with the internal gears required for both a 2-speed transmission and the DIG function. The DIG function allows the rear wheels to be locked while maintaining drive to the front wheels, enabling incredibly tight turning radii during operation.
In factory default condition, the 2-speed transmission is fixed in first gear (low), and the DIG function is set to OFF. By installing the optional CLW001 2-Speed Kit, shifting to second gear (high) can be controlled using the third channel of the transmitter. In addition, installing the optional CLW002 DIG Kit allows the DIG function to be switched ON and OFF. (A separate 4-channel transmitter is required to operate both the shifting function and the DIG function simultaneously.)
The body is a faithful reproduction of the iconic Toyota Land Cruiser 60, complete with a separate roof rack and rear ladder for added realism. A clipless body mounting system eliminates visible pins, enhancing the clean, scale look.
Fully assembled as a Readyset, it includes a pistol-grip transmitter so you can hit the trails straight out of the box.
Ultra Scale Body Plus
Kyosho’s 1/10 scale Toyota Land Cruiser 60 captures the legendary look of the original with impressive realism. Molded from durable polycarbonate, the body includes separately molded parts like the roof rack and rear ladder for added scale detail. It’s a true-to-life R/C experience that brings the spirit of the classic Land Cruiser to every adventure.
Toyota Land Cruiser
Modeling the early-style Toyota Land Cruiser 60 Series. A recreation of the HJ60V / FJ60V (circa 1980–1987), defined by its iconic round headlights. A masterpiece blending a rugged chassis with station wagon comfort. Still beloved today as the "Rokumaru" for its charming and timeless aesthetic.
Realistic Details
Front Mask
The simple yet iconic horizontal-slat design of the front grille is replicated. The "TOYOTA" logo at the center is a key element that symbolizes the vehicle's classic face.
Fender Mirrors
The fender mirrors, a cornerstone of its classic charm, are faithfully reproduced down to their shape and mounting position. These retro details strongly evoke the atmosphere of the era and significantly elevate the exterior quality.
Wipers
Two-blade wipers for the large windshield are intricately reproduced, including their shape and the base of the arm. The fine molding of the wiper blades enhances the overall precise scale realism of the body.
Push Bar
The popular optional push bar is precisely replicated. When installed, it amplifies the rugged, wild presence unique to an off-road vehicle, emphasizing its tough 4x4 character.
Rear Bumper
A simple and functional rear bumper design. Details such as the tow hook and step section are finely molded, enhancing the practical and utilitarian look of the rear view.
Roof Rack
Equipped with a roof rack, which is used for loading luggage and is a highly popular custom part. This emphasizes the rugged, wild, and expedition-ready atmosphere.
Ladder
The ladder, essential for accessing the roof rack, is realistically reproduced, down to the thinness of the pipes and the step intervals. Mounted on the rear gate, it creates a rear view with heightened scale realism.
Window Mold Stickers
Decorative stickers applied around the windows. They serve as an exterior accent and tighten the overall feel of the vehicle.
Door Handles
The shape of the small door handles is intricately reproduced, and the robust molding enhances the tough texture and scale realism, just like the actual vehicle.
Easy Chassis Access
New Clipless Body Mounting System
With the rugged KC10 chassis and unmistakable Land Cruiser styling, this model delivers the full thrill of off-road crawling in stunning 1/10 scale detail.
To maintain its ultra-realistic appearance, the model uses a clipless body mounting system that eliminates visible body pins for a cleaner, scale finish. A quick-release front latch allows easy access to the chassis for battery changes etc. without needing to remove the entire body.
All-new KC10 1.9-inch retro-style beadlock wheels deliver authentic scale looks and rock-solid tire retention. Paired with KC10 All-Terrain tires made from soft compound and optimized inner foam, they offer outstanding grip on rocks, dirt, mud, and everything in between.
Chassis Part KC10 Kyosho Crawler 10th Scale
Specifically developed for crawler models, the all-new KC10 chassis delivers exceptional off-road performance.
With generous ground clearance and long-stroke suspension, it handles rough terrain with confidence.
Ladder Frame
The press-formed steel main frame delivers outstanding strength and rigidity, providing a stable platform across rough terrain. This solid structure also helps reduce stress on the drivetrain and suspension, enhancing durability and overall performance.
KC10 Suspension System
The durable long-travel multi-link suspension strikes the perfect balance between scale realism and high-performance articulation. Combined with heavy-duty solid axles and an optimized high-clearance steering linkage, it delivers class-leading crawling capability and control.
KC10 Heavy Duty Gear
Precision CNC-machined steel hypoid ring and pinion gears maximize strength and ensure smooth, reliable power delivery. Compact differential housings provide increased ground clearance, while the perfectly balanced gear ratios deliver massive low-speed torque with minimum gear noise.
Oil Shocks
Fitted with large-capacity oil shocks and threaded spring adjusters, the suspension allows easy ride height tuning to match your terrain. The rubber O-ring for the oil seal uses an X-section type to reduce friction, ensuring smooth, responsive damping even over rough surfaces.
Battery Mount
The main battery is mounted centrally with hook-and-loop straps, while a rear-mounted sub-battery holder lowers the center of gravity. Using the sub-holder enhances stability, helping prevent nose-dives on steep descents.
Molded Inner Fenders
Precision fenders that close the gap for a flawless scale finish. Featuring universal fitment and authentic 3D styling inspired by real trucks. Tough, functional, and beautiful—shielding your chassis from mud and stones on every trail.
32-Turn Motor
Equipped with a new 32-turn motor in the longer 550 size, this powerplant delivers strong, reliable torque for consistent performance in tough off-road conditions.
2-Speed Kit (Option)
No.CLW001
Switch between high and low gears on the move with the optional shift unit. The chassis comes set in low gear by default, but this upgrade can be added to change gears on the run.
Dig Kit (Option)
No.CLW002
Lock the rear wheels for ultra-tight, on-the-spot rotation with the optional DIG unit. The chassis comes DIG-ready—just install the set to activate.
Steering Servo
Equipped with a newly developed 15kg-cm servo, this model delivers strong steering force for precise control even over rough, demanding terrain that challenges the servo.
Speed Controller
60A waterproof Brushed Motor ESC with S type plug featuring an aluminum heatsink and high power FETs.
Features
Pairs the newly developed KC10 chassis with a high-quality body for an impressive 1/10 scale electric crawler experience.
Fully assembled Readyset includes chassis, body, transmitter, and all R/C electronics.
Features officially licensed, highly detailed Toyota Land Cruiser 60 body for authentic scale realism.
Full-scale suspension system and 4WD drivetrain deliver exceptional off-road performance.
Oil shocks include multiple piston hole options for a wide range of suspension tuning.
Comes standard with newly developed 15kg high-torque servo for precise steering control.
A newly developed, robust 550-size 32T motor delivers powerful and reliable torque.
Pre-installed receiver is protected in a dust- and water-resistant case for enhanced durability.
Includes Syncro 2.4GHz KT-231P+ pistol-grip transmitter with adjustable settings.
Full lineup of optional parts available, including DIG unit, 2-speed transmission, counterweights, LED light kits, and more.
Main motor battery and charger sold separately.
Contents
Factory assembled chassis with built in R/C unit
Factory finished body with decals applied
Syncro KT–231P+ transmitter
Hex wrench (1.5 / 2.0 mm)
Cross wrench (4 / 5 / 5.5 / 7 mm)
Setting change parts
Requires
4 x AA batteries for transmitter
Battery for chassis
Charger for battery for chassis
E-FLITE
E-Flite Extra 330 SC 3D 1.3...
$699.95
E-flite Extra 330 SC 3D 1.3m BNF Basic Introduction
For three decades, full-scale Extra aircraft have delivered incredible aerobatic performance with virtually unlimited potential. Variants have been flown to first place finishes in a long list of competitions, including at the recent world championships. That's why Jim Bourke – the creator of RCGroups.com and owner of Knife Edge Software that originally developed the RealFlight RC simulator – chooses to fly an Extra 330SC in airshows and competitions around the world. The E-flite® Extra 330SC 3D 1.3m is a replica of Jim's airplane that features his unique and iconic trim scheme. It's an updated and upgraded version of the Extra 300 3D 1.3m that delivers unbelievable sport flying, aerobatic, and 3D capabilities for intermediate to experienced pilots. It features digital, metal-geared servos, plus a 3S and 4S compatible power system now including an 85A Spektrum Avian Smart Lite ESC. The BNF Basic version is also equipped with an AR631 receiver to deliver real-time telemetry data along with AS3X and SAFE Select technologies that make it even easier to fly!
E-flite Extra 330 SC 3D 1.3m BNF Basic Overview
The E-flite Extra 330SC 3D 1.3m offers nearly unlimited aerobatic and 3D performance potential – even beyond that of the full-scale design! It's a replica of the airplane that Jim Bourke flies in airshows and competitions around the world, including his unique and highly visible trim scheme. It's also an updated and upgraded version of the Extra 300 3D 1.3m that features a larger hatch and opening with plastic edges to eliminate paint chipping when more easily installing/removing 3S or 4S 2200mAh to 3200mAh batteries. The strengthened motor mount better secures the brushless outrunner motor that's equipped with a lightweight wooden propeller to deliver outstanding thrust and vertical performance, along with extremely crisp throttle response thanks to the upgraded 85-amp Spektrum Avian Smart Lite ESC. Its fully molded EPO airframe is composite reinforced for an outstanding blend of rigidity and durability while also being as lightweight as possible. And the wire landing gear has been replaced with much stronger aluminum gear to make it even more durable! Plus, fast and precise factory-installed digital, metal-geared servos with ball-link equipped linkages drive the oversized control surfaces to deliver incredible 3D and precision flight capabilities. So whether you fly it mild to hone your sport or precision aerobatic flying skills or fly it wild to learn or perform the most aggressive 3D maneuvers, the Extra 330SC 3D 1.3m will offer unexpected levels of capability and performance you'll enjoy flight after flight.
Features
A scale model of the world-renowned aerobatic champion that's a replica of the Extra 330SC Jim Bourke flies in airshows and competitions across the world
Stronger motor mount and specially tuned motor compatible with 3S or 4S batteries without the need for modifications or upgrades
Larger hatch and opening with plastic edges to eliminate paint chipping and make it easier to install/remove batteries85-amp Spektrum Avian™ Smart Lite ESC provides real-time battery voltage, current, RPM, and other data via compatible receivers and transmitters
Spektrum AR631 receiver with fly-by range telemetry and industry-leading DSMX technology
E-flite Extra 330 SC 3D 1.3m BNF Basic Features
Popular 3S and 4S 2200–3200mAh batteries deliver excellent performance and flight times
Compatible with the Spektrum DXS transmitter included with many of the most popular E-flite and HobbyZone trainer airplane models
Easier to fly with innovative and optional-use SAFE Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X technology
Four factory-installed digital and metal-geared servos with ball-link-equipped linkages
Oversized control surfaces for maximum 3D aerobatic capability and performance
Lightweight yet durable, composite-reinforced construction with EPO material
Factory-finished with Jim's vivid paint scheme and bold graphics
More durable aluminum landing gear with wheel pants
Two-piece plug-in wings with carbon fiber wing tube
Skill Level 2 – Some Experience Required
Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up, and fly similar class models. And although this is one of the easiest to fly Extra models yet, it's not a suitable first-ever RC aircraft for new pilots or “next step after a trainer” model for low-time pilots. You should have the experience and skills necessary to successfully fly other aerobatic capable models like the E-flite T-28 Trojan 1.1m, Timber X 1.2m, Decathlon RJG 1.2m, Commander mPd 1.4m, or other similar models before attempting to fly the Extra 330SC 3D 1.3m.
Smart Technology
The exclusive Spektrum Avian Smart Lite ESC provides a variety of real-time power system-related telemetry data including overall battery voltage, current draw, motor RPM, and more – with both Smart and non-Smart batteries – via compatible receivers (including the AR631) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly.
Abundant Power
The included brushless power system features an 85-amp Smart Lite ESC and an outrunner motor equipped with a lightweight wooden propeller that deliver an abundance of scale-like power with 3S batteries, or unlimited vertical performance with 4S 2200–3200mAh batteries. Plus, the motor mount has been strengthened to better handle every power-on flight load possible.
Durable Precision
Construction with lightweight yet durable, composite-reinforced EPO material ensures the best possible flight performance while the factory-installed digital, metal-geared servos and ball-link equipped linkages deliver precise control of the oversized control surfaces whether you're performing sport, precision, or aggressive 3D aerobatic maneuvers.
Authentic Appearance
In addition to the scale outline, this replica is also appointed with a clear canopy and a detailed cockpit that features an instrument panel and a painted pilot figure. Plus the now more durable aluminum landing gear is equipped with fairings and wheel pants that add to the great looks and authentic scale appearance.
Jim Bourke Trim Scheme
Factory-finished in the unique and iconic trim scheme featured on the full-scale Extra 330SC that Jim Bourke – the creator of RCGroups.com and owner of Knife Edge Software that originally developed the RealFlight RC simulator – flies in airshows and competitions around the world.
TAMIYA
Tamiya 47456 1/10 TB-05R Ch...
$693.95
The TB-05R takes the shaft-driven TB-05 PRO chassis and loads it with a bucket-load of Hop-Up Options and even some dedicated parts that make this a seriously fast car!
This assembly kit creates an efficient shaft-driven 4WD chassis. Its composite structure with integrated lower deck and side frame sections facilitates a largely symmetrical design for balanced steering. Choose between 2 layouts, with a front motor position for superb stability, or a rear motor for dynamic drive. Steering linkage components are bulkhead-mounted to eliminate the effect of chassis roll. With full ball bearings, universal shafts and gear differential units, the drivetrain is as smooth as silk, as is the ride thanks to TRF dampers. Square-shaped IFMAR regulation battery packs are compatible.
Option Parts Included
Carbon Fiber Reinforced Chassis (Hard)* -NEW PART exclusive to this kit!
Aluminum One-Piece Motor Plate*-NEW PART exclusive to this kit!
39mm Lightweight Rear Swing Shafts (53506)
Clamp Type Aluminum Wheel Hub (4mm) (53570)
06 Module Hard Coated Aluminum Pinion Gear (24T) (54771)
Aluminum Cup Joints for TB-04 Gear Differential Unit (Long & Short) (54543)
TB-05 Aluminum Servo Mount (54800)
TB-05 Aluminum Steering Arms (54801)
TB-05 Aluminum Steering Bridge (54802)
3x50mm Aluminum Turnbuckle Shaft (54845)
TB-03 Carbon Reinforced A Parts (Gear Case) (54098)
Aluminum Adjustable Suspension Mount (A) (54881)
Aluminum Adjustable Separate Suspension Mounts (A) (54884)
TRF419 Suspension Upgrade Set (54886)
Soft Stabilizer Set (TA07, TB-05) (54979)
Stabilizer Rod Stopper (53827)
46mm Titanium Coated Suspension Shafts 2pcs. (53851)
TB-05 Carbon Front Damper Stay (for TRF Super Short Big Bore Dampers) (54846)
TB-05 Carbon Rear Damper Stay (for TRF Super Short Big Bore Dampers) (54847)
TRF Super Short Big Bore Dampers+ (4pcs.) (42353)
Features
1/10 scale R/C chassis assembly kit.
Dedicated aluminum motor plate has a one-piece design that positions the motor 3mm rearwards for a smoother, more intuitive drive.
The chassis frame is molded in carbon fiber-reinforced resin for enhanced rigidity.
TRF420 suspension components ensure that your model has top level handling and superior adaptability.
High performance TRF Super Short Big Bore Dampers come as standard equipment.
The model comes in a stylish and convenient carry case.
Requires
2-channel radio
steering servo
ESC. 7.2-7.4volt battery & battery charger
190mm Sports Car or TC body set, motor, tires
Tamiya PS paint
Body, motor, tires, R/C equipment (transmitter, servo and ESC), battery pack and charger to complete race spec car.
TAMIYA
Tamiya 47489 Egress Black E...
$693.95
The Egress is a big name in the Tamiya pantheon of R/C models, and now comes in a Black Edition! With new color stickers, special anodized finishes for uprights and damper parts, it is sure to catch the eye, as will the specially-designed packaging.
This is a color variation of the 1/10 R/C Egress (2013) (Item 58583) - new color stickers, dampers and uprights to match up with a black-based body (requires painting). The black color scheme enhances the classy image of the Egress, and the black-themed packaging finishes off the classy presentation!
Body, wing and underguard are lightweight and durable polycarbonate.
New sticker colors have been chosen to fit with a black-centered color scheme.
Damper and upright parts have a stylish dark titanium color anodized finish, while wheels are molded in silver color plastic.
Motor is sold separately.
Features
1/10 scale R/C model assembly kit. Length: 430mm, width: 243mm, height: 157mm. Wheelbase: 275mm.
The lightweight, durable 0.7mm thick polycarbonate body depicts the form of the Egress - a successor to the famed Avante - with 1.0mm thick polycarbonate wing and under guard.
Polycarbonate body, wing, etc. require painting with separately sold Tamiya Color paints for polycarbonate.
This kit also features dark titanium color anodized front/rear damper cylinders and front uprights, plus new color stickers and silver color wheels.
Requires
2-channel radio
steering servo
ESC
motor
7.2-7.4volt battery with charger
Tamiya PS paint.
TAMIYA
Tamiya 58415 Toyota Tundra ...
$675.95
Customizable Scale Realism
The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism.Requires
4-Channel Radio (Tamiya Attack), 2 servos, ESC, 7.2volt battery with compatible charger, and Tamiya TS & Acrylic-Lacquer Bottle Paints