Nippers & Side Cutters (25)

GodHand "Normal Nipper" has undergone a model change! Ideal for plastic kit gate cuts and runner cuts! "Ordinary nippers" are "universal nippers" that do not have special specs and can be used normally by anyone in any situation. To support the ultimate nipper. It is recommended for the first nipper debut. Safely cut various materials! The simple blade structure has a rough finish on the cross-section, but the strength of the blade is high by that amount, including plastic. Easily cuts various materials. The "ordinary nippers" have sharpness grade 3 (in-house standards), so you can see whitening compared to the grade 5 "ultimate nippers". Instead, compared to the ultra-thin single-edged ultimate nipper, there is no need to worry about the blade breaking, so even beginners can use it with confidence. The degree of opening of the blade does not depend on the spring! New spring structure "packing spring" adopted! When you grip it to a certain position, the stopper is released and you can open it fully. Overall length: about 130mm Grip thickness: about 12mm (thickest part) Weight: about 55g Material: Kobe Steel (JAPAN) special tool steel Blade hardness: HRC45-55 Cutting capacity: Plastic φ3mm or less (PS, PP, ABS, PE resin/metal cutting is not possible) Clear material runners are also supported! Notes It is possible to cut copper/aluminum wire 1mm and stranded wire 2mm due to its structure, but if it is cut, it will not be covered by the warranty. For safety, please wear protective glasses and gloves. There is a risk that the cut object may fly. Make sure that there are no people around and that there are no fragile objects before starting work. Do not pry things with a knife or touch them directly. Do not apply a load exceeding the cutting capacity. Hard wires such as metal wires cannot be used. Apply oil to the shaft and cutting edge to prevent rust. Keep the blade closed and out of reach of small children.

Ultimate ultra-thin single-edge structure brings excellent performance and efficiency!  GodHand Ultimate Nipper 5.0 is designed for the ultimate cut with a strong focus on gate cutting. When trying to slice-cut a 3 mm dia. runner, the blade moves in smoothly and finishes cutting without sound. The sharpness of the cutting edge achieves a smooth cut surface as if sharpened with a design knife and minimizes plastic whitening (a phenomenon in which the cut section turns white). Compared to most nippers, the cut surface is much cleaner and neater, which makes it a good choice for those who want to complete plastic models without painting. For those who paint plastic models, the cutting surface remains smooth and clean even if the blade is cut along the part without leaving a gate, thus shortening the time for gate processing with files or knives. When cutting out small parts, parts are less likely to fly away, reducing the need to search for missing parts. The standard force for cutting 3 mm dia. plastic is 2 kg or less. (General nippers are 3.5 kg to 10 kg) Cutting Edge and Single-Edged Structure Designed for Superior Sharpness GodHand Ultimate Nipper 5.0 superior sharpness comes from its thinly refined cutting edge and single-edge structure for a clean cutting. Ultra-thin cutting edge by craftsmanship Ultimate Nipper’s well-crafted cutting edge is as thin and sharp as a knife.It is created one by one through blade edging and sharpening by well-experienced craftspersons in Tsubame-Sanjo, Niigata Prefecture, a region famous for its cutlery. Single-edge structure for clean cutting Ultimate Nipper adopts a single-edged blade structure for clean cutting surfaces. Single-edged blade structure refers to a design in which one side of the blade is a cutting blade, and the other side is a cutting board blade. The blade is named ‘single-edged’ because only one blade (cutting edge) cuts on one side.  Specification Material: Special tool steel (made by Kobe Steel, Ltd.) Total length: approx. 120 mm Weight: approx. 60 g Blade hardness: ≧ HRC58 Single-edge specification Blade breakage prevention stopper Over-opening prevention pin Spring loaded Soft grip With original nipper cap Cutting capacity Target materials: Plastic (PS resin, PP resin, ABS resin, PE resin) only Cutting capacity: Materials of < 3 mm dia. However, transparent and translucent PS resins are limited to < 1 mm dia for hardness.

This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance. Features Length: 115mm. Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge. PVC grip covers ensure that the side cutters stay firmly in your hand during use. The tool is marked with the twin star logo and TAMIYA CRAFT TOOLS FOR PLASTIC.  

These quality long nose pliers with cutter will come in doubly handy when bending wire or holding parts tight during the construction of R/C kits. They are made of high carbon steel with a quality finish for long life.

The Ultimate Nipper Evangelion Unit-01 Ver. which sold out in just 40 minutes when it was first released 10 years ago, is making a comeback! This special edition features the NERV emblem and a dual-grip design. Ultra thin single edged! Ultimate Sharpness!   Ultimate nipper is designed for the gate cut by pursuing the ultimate cut. The ultimate nipper consists of the cutting blade and the single edged structure which creates super clean cutting surface. Protection Cap is included. Features Cutting capacity: 3mm or less (PS, PP, ABS, PE resin) 1mm or less (transparent, semi-transparent) Made in Japan The GodHand SPN-120 Ultimate Nipper 5.0 specializes in gate cutting and pursues the "ultimate cut". Because of it's sharpness, it can obtain a smooth cut surface as if the cut had been made by a hobby knife. This cut minimizes whitening of the plastic, and the cutting marks are much cleaner than general nippers. The thin single-edged cutting blade design emphasizes sharpness. A guideline for cutting 3mm plastic is 2kg or less of force compared to 3.5kg-10kg for general nippers. Please only use these nippers for cutting plastic (PS resin, PP resin, ABS resin, and PE resin) 3mm and less. However, transparent/translucent PS resin is very hard and is not recommended to cut more than 1mm.

The blade one nipper is a single blade nipper, specially designed for plastic gate cutting plastic models, just like the Ultimate Nipper. Designed with a focus on ease of handling and durability of cutting blades, it is perfect for introducing to thin blade nippers. Clear parts can be used for cutting gate up to φ0.08 inch (2 mm). Functions for each part ANTI-OPENING PINS: Prevents the spring from coming off when the blade is too open. Blade breakage prevention stopper: Prevents the blade from breaking due to excessive force. Compatible Materials: Only cutting plastic (PS resin, PP resin, ABS resin, PE resin). Cutting Capacity: Only compatible materials with 0.1 inch (3 mm) or less. However, transparent and translucent PS resin is hard, so it is limited to 0.08 inch (2 mm) or less. Because this is a delicate nipper that emphasizes sharpness, the blade may chip or break if used incorrectly. Please follow the precautions in the instruction manual (English language not guaranteed). Contents Main unit, nipper cap

SMS NPR01 Single Edge Nipper

This awesome tool set combines a set of nippers, tweezers, and a parts separator, making this an ideal starting set for any beginning modeler! The nippers have been specially designed to be comfortable to use; the tweezers are perfect for attaching stickers neatly, and the parts separator is especially handy to disengage parts that have been assembled together by mistake (we've all been there). The tweezers and parts separator are made of resin so they won't damage stickers, decals and parts. Includes Bandai Spirits Entry Nipper (blue) Tweezers Parts separator

This is a tool for use in model assembly. These Build Up Nippers are easy to use, and perfect for those who are just getting into building model kits and Gunpla.

God Hand Nipper is designed for specifically hobby figures and plastic models. The single-edged structure allows for smooth cutting, and very small parts and plastic pieces are less likely to fly out when cutting. Features Cutability is up to plastic φ3mm or less. Clear materials are also supported. Equipped with an open/close lock mechanism for convenient storage. Material: Stainless steel Quenching: Non-oxidation whole quenching Single-edged specification A grip: Elastomer grip Total length: about 140mm Weight: about 70g With open/close lock function

Single-edged nipper with smooth and clean cut! Limited edition with special Year of the Horse engraving. Sharp and thin blade made by craftsmen helps you with cutting parts without stress marks! Features Up to 3mm (PS, PP, ABS, PE resin) *Not for transparent plastic, metal parts and wires Sanding sponges with outstanding utility and durability! A special pack containing the necessary grit range for the perfect straight build finish! Fabric backing allows them to be cut, bent, folded, and even used in combination with water for wet sanding! Contents SPN-120 (Special Edition) Kamiyasu sanding sponges: #400 #600 ×2 #800 ×2 #1000 #2000 #4000

Single-edged nipper with smooth and clean cut! Limited edition with special Year of the Horse engraving. Sharp and thin blade made by craftsmen helps you with cutting parts without stress marks!

Features Plastic And Resin Model Cutters Single Edged Blade For Smooth Cut Cutting Capacity Below 4mm Diameter 117mm In Length Weight 58gm Made From Crv60 Steel Leather Cover For Blade Protection MAINTENANCE Humidity and moisture are a tools worse enemy. In order to have a high hardness and toughness, our pliers are made of metal with a high carbon content After each use, wipe blades with oil, wd40 or other water repelent oil, and place leather cover on blades. This will prevent moisture causing corrosion on the blades/joints and also prevent the joints becoming stiff. Wipe off any excess before use.

ICKYSTICKY 5 Piece Mini Plier Set are perfect for use by a pro or beginner. They are brilliant for all types of hobby and DIY work and can be used in many ways.  Features Range in length from 11cm - 14cm. Made of strong and solid 45# carbon steel. Rubber coated handle for non-slip comfortable hand feel. Double leaf spring loaded handles for comfortable repetitive use. Comes with a zip-up carry case. Includes End Cutting Pliers Diagonal Cutting Pliers Combination Pliers Bent Nose Pliers Needle Nose Pliers

Designed for use with plastic model kits, the SMS Dual Edge Nippers are made from high quality materials to give the cleanest, most precise cut when building your model kits. 

This precision side cutter has thin, pointed blades, and is ideal for removing delicate plastic parts from sprue. The blades are made from quality chrome-vanadic alloy, and are hand-finished for optimum sharpness.

This is a precision side cutter for removing parts from sprue without damaging them. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip.

Nipper for thin metal wires. Good for flush cut of thin metal wires often used for ships and airplane models without deformation. Upper half(tip) and lower half(base) of blade have different types of blades, that are both specialized for cutting thin wires. Specification Protection Cap is included. Cutting capacity: Metal wires only Tip: ultra fine wires Φ0.04mm and up, such as metal riggings Base: copper, brass, aluminiums up to 0.5mm *Wires for piano, or wires either quenched, high-hardeness, or etching parts and springs are not available.  

High quality sprue cutters featuring a single edge that gives a very clean cut‚ meaning less clean up and less chance of breaking small parts when removing from sprue.

Mr. SHARPNESS NIPPER is the most suitable type of nipper for cutting off plastic parts from sprue. Its 25°angled edge of the blade minimizes the resistance, so little force is required when cutting. In addition, it can easily reach and cut off parts in narrow places as the blade is thin.

This is a tool for use in model assembly. These basic nippers are easy to use, and perfect for those who are just getting into building model kits and Gunpla.