RC CAR ACCESSORIES (226)

The Tornado RC 5000 MAh 7.2v NIMH Tamiya Connector is recommended for use on 1:8 and 1:10 RC cars, buggies and boats that requires 7.2v power, Tamiya, HPI, HSP, Team Magic, and Kyosho. Features Superior run time + optimum performance Battery type : nickel metal hydride (NiMH) Length : 5.38" (135mm) Height : 0.94" (24mm) Width : 1.77" (46mm) Weight : 0.406kg Plug type : standard Tamiya Capacity : 5000mAh Cell configuration : 6 cells Voltage : 7.2V Amp rating : 5.0 amps Recommended to be charged with a charger of at least 1000ma / 1.0A output.

This is a 6" adapter for IC3 battery/IC2 device by Spektrum. Spektrum IC2 connectors and charge leads ARE NOT compatible with EC2 connectors

Replacement rear shock tower mount to fit the following MJX 1/16th scale models: 16208 16209 and 16210.

Replacement front shock tower mount to fit the following MJX 1/16th scale models: 16208 16209 and 16210.

Tornado RC 1600H 1600 MAH 6.0V HUMP RX PACK NIMH Specifications Total Voltage: 6 mAh: 1600 Battery Type: NiMh Connector Type: Futaba 'J' Battery Length (mm): 50 Battery Width (mm): 31.5 Battery Height (mm): 30 Battery Weight (g): 98 Main Connector Wire Gauge (AWG): 20 Cell Voltage: 1.2 NiMH/NiCD Configuration: Hump

2 pack of steering linkages to fit multiple MJX models including the MJX 14209, 14210, 16207, 16208, 16209 and 16210.

Tamiya Hornet/Lunchbox/Midnight Pumpkin, 3555057/13555057 Axle Shaft 4mmx95mm

The ability to realize design ideas in various ways by piecing together mechanical components is one of reasons why Tamiyas Educational Construction Series is so interesting. Gearboxes are vital for providing power and these particular gearboxes feature special clear cases to allow viewing of their internal mechanisms.

Realistic bodies, high performance, and precision construction of mechanics all add to the excitement of Tamiya R/C cars. Ample consideration has been made for maximum durability and ease of assembly. Although these kits provide excellent running performance on their own, a wide spectrum of optional parts can be added for souped-up fun!

Venom 0881 60wt Shock Oil

94 mm titanium front tie rods (2) with billet aluminum wrench

We’ve all been there before. Hours of preparation, countless practice laps, flawless qualifying runs and at last you’ve reached the moment of truth: the finals. In an instant, a simple tap or swipe across the rear bumper from a fellow racer ends your podium hopes. The dreaded body tuck. PROTOform has developed Anti-Tuck Body Stiffeners to help remedy this frustrating problem. Made from super-stiff polycarbonate, the one-piece stiffener fastens inside the rear of your 190mm touring car body with three simple screws & nuts. The pieces are custom formed to fit the curvature of the lower rear fenders for a perfect fit. Not only will this system virtually eliminate body tuck, but the added rigidity will also aid unwanted fluttering or deflection of the rear of the race body at high speeds. Weighing in at only 4.5 grams, changing the weight bias or center of gravity of your car is minimized. Each set comes with two Anti-Tuck Body Stiffeners, mounting hardware and a PROTOform decal sheet. Say goodbye to body tuck with PROTOform Anti-Tuck Body Stiffeners. Please note: Anti-Tuck Body Stiffeners are sold in crystal clear polycarbonate and are only painted to show contours. Features Increases body rigidity and reduces body tuck Form fitted for a perfect fit Light weight Easy to install Contents Polycarbonate Body Stiffeners (2 pc) Mounting Hardware (12 pcs) PROTOform Decal Sheet Specification Material: Polycarbonate Product Height: 2.28" (58 mm) Product Length: 7.44" (189 mm) Product Weight: 4.5g Product Width: 0.59" (15 mm) Scale: 1/10 Vehicle Type: Touring Car

From Penguin Custom Bodyshells is the 'Slayer' body for the CAT L1R. The ‘SLAYER’, an unfussy design, ensures a smooth unhindered airflow which helps the rear downforce. Features Added clearance around the servo horn, streamlined and fast. Available in both standard 0.75mm, and lightweight 0.5mm. Made from high-grade lexan. Window masks included. Supplied clear.

Reproduction body set for the Schumacher Fireblade 2000/USA from Penguin Custom Bodyshells. Body set includes undertray, wing and belt covers where required. Supplied clear in .75mm lexan with overspray film. No window masks included.

MJX Hyper Go 12212 Upgrade Parts, 1/14 Scale RC Car Upgrades. Durable, reliable, and easy to install. These upgrade parts are compatible with MJX 12212 model cars, offering excellent performance enhancement for off-road racing and maintenance.