TAMIYA (2502)

Rally Racer This R/C model assembly kit depicts the GR Yaris Rally1 Hybrid, which was developed by Toyota to take part in 2022 global rally races. The souped up form of this rally car is recreated expertly by a polycarbonate body, and the model is based upon the shaft-driven 4WD TT-02 chassis. Plentiful stickers are included to decorate the car, as are gun metal color fin spoke wheels and racing radial tires. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Dark gun metal color fin-spoke wheels use racing radial tires. Features The complex form of the car is artfully captured by a polycarbonate body. Separately molded polycarbonate headlight cases are painted and stickered for a realistic finish. Separate parts are used to recreate the tall, slim side mirrors. Body side air ducts are recreated using separately molded plastic parts. The complex rear features depictions of the large wing, bumper and more. A close-up on the wing with vertical splitter design. Resin ball links in the steering linkage joints make for smooth, comfortable motion. The front suspension uses coil-sprung dampers. Motor cover includes removable cooling duct (not attached in image). Rear double-wishbone suspension, and the brake disc-shaped wheel hubs. Fin spoke wheels are molded in dark gun metal color plastic and paired with racing radial tires. Includes Type 540 motor Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger The complex form of the car is artfully captured by a polycarbonate body. Separately molded polycarbonate headlight cases are painted and stickered for a realistic finish. Separate parts are used to recreate the tall, slim side mirrors. Body side air ducts are recreated using separately molded plastic parts. The complex rear features depictions of the large wing, bumper and more. A close-up on the wing with vertical splitter design. Resin ball links in the steering linkage joints make for smooth, comfortable motion. The front suspension uses coil-sprung dampers. Motor cover includes removable cooling duct (not attached in image). This image gives a closer look at the rear double-wishbone suspension, and the brake disc-shaped wheel hubs. Fin spoke wheels are molded in dark gun metal color plastic and paired with racing radial tires.

Super SUV Since the first generation model release in 1951, the Toyota Land Cruiser has been one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the Land Cruiser 300 series announced in 2021. The polycarbonate body realistically depicts the eye-catching, dignified form with separate parts to capture the distinctive large front grille's horizontal fins and metal-plated sections. Light case and door mirror components are metal-plated, and door handles and shark fin antenna on roof are rendered by separate parts for more realism. Silver color 12-spoke wheels are paired with block pattern tires. CC-02 Chassis - Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with silver color twelve-spoke wheels and grippy block pattern tires. Features The majestic form of the car is neatly captured by a polycarbonate body. The model features a metal-plated depiction of the radiator grille, and other separate parts for the bumper grille. Side mirrors are accurately recreated using separately molded parts. Stylish shark fin antenna, also a separately molded component. Stickers recreate taillights and the toyota emblem. The body is compatible with separately sold LEDs. Both front and rear ends of the CC-02 chassis utilize 4-link rigid setups with shock absorption provided by CVA oil dampers. The motor is mounted in the chassis front-middle; power goes via gearbox and propeller shafts to front and rear axles. Up to 20 different gear ratios can be achieved with reassembly of the gearbox and use of separately sold pinion gears. Reinforced plastic axle housings each contain a differential, which can be locked with reassembly. Silver color 12-spoke wheels are paired with block pattern tires. Includes Type 540 motor Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

Absolute Legend The Toyota Land Cruiser is one of the most famous 4WD vehicles in the world. This R/C model assembly kit recreates the long-selling Land Cruiser 40 series, which was sold from 1960 to 1984. The body is lightweight, durable polycarbonate, with separate parts for side mirrors, grille, turn signals, and a roof rack with light pods. CC-02 Chassis - Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with silver color twelve-spoke wheels and grippy block pattern tires. Features The classic form of the car is recreated by a polycarbonate body. A separate part depicts the oval grille for a super realistic finish. Unique side mirrors are also separately molded parts. Take a closer look at the roof rack, which is fitted with four light pods. Both front and rear ends of the CC-02 chassis utilize 4-link rigid setups with shock absorption provided by CVA oil dampers. The motor is mounted in the chassis front-middle; power goes via gearbox and propeller shafts to front and rear axles. Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.The rear end of the model. Note the ample ground clearance. Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

The Toyota Land Cruiser 40 has been a staple subject for Tamiya since 2008. It first appeared on the CR-01 crawler chassis then later the simpler CC-01 cross country chassis. Now, the classic Land Cruiser makes its way on to Tamiya’s newest cross-country platform, CC-02 with a few detail tweaks for the scale enthusiast! Features 1/10 scale R/C model assembly kit. Length: 390mm, width: 198mm, height: 237mm. Wheelbase: 252mm (M-size wheelbase). The CC-02 chassis is designed for a wide range of off-road driving expeditions and has a ladder frame which was inspired by full-size vehicles. A roof rack with light pods is realistically depicted with separately molded parts. New Yellow painted body Silver color 12-spoke wheels are paired with block pattern tires. (Wide wheels are included to recreate the customized look of this version.) New stickers feature integrated tinted window and window frame sections to allow ease of applying stickers and eliminate the need for painting the window tint. Includes Motor. Requires Electronic Speed Control/ESC (2-3S) Servo 2-Channel Radio 7.2V Battery and Compatiable Charger Paint for Body eg Tamiya PS paints

This is the Tamiya 47505 1/10 Toyota Supra JZA80 BT-01 RC Car Kit The 2WD BT-01 is a NEW chassis that offers radio control hobbyists’ choices of FF/MR/FR drive system based upon the drive system of the actual car your body recreates. The body included in the first release depicts the fourth generation Toyota Supra (JZA80) which was announced as a Toyota flagship sports car in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. About the BT-01 Chassis: The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ese of assembly and effective maintenance. Length: 397mm, width: 185mm. Wheelbase: 257mm / 251mm (*). The 2WD BT-01 chassis gives a choice of two types of wheelbases (*), and front- or rear- wheel drive system. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. Features 1/10 scale R/C model assembly kit. Length: 457mm, width: 185mm, height: 135mm. Wheelbase: 257mm. The form of the Toyota Supra (JZA80) is realistically recreated in lightweight polycarbonate. 10-spoke one-piece wheels (silver color) are paired with racing radial tires. Separate molded plastic parts: mirrors, wing, light cases. Includes 540-brushed motor. Requires ESC, 2-channel radio, steering servo, 7.2-7.4 volt battery with compatible charger, and Tamiya PS paint.

The fourth generation Toyota Supra (JZA80) was announced as Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races, and now the car is depicted by this R/C model assembly kit with a realistic polycarbonate body. Options Galore: the 2WD BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear-wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. An MR setup is recommended for this model of the Supra, but the FR setup is similar to that of the full-size car and will be worth a try. Features The classic Supra form is artfully captured by the polycarbonate body and several separately molded parts. Separate headlight cases give the front a highly realistic look. Side mirrors are molded separately in ABS plastic. The gently curving rear wing is also molded in ABS. 10-spoke wheels are paired with treaded semi-pneumatic tires. The servo is housed in the right rear, with a long link rod used in the 3-piece setup. The double-wishbone suspension uses symmetrical arms. While coil-sprung dampers are fitted as standard, the BT-01 can be used with separately sold TRF Special Dampers (Hard Black Coating). The unitized motor mount is affixed to the chassis with 2 screws. Power goes from the midship rear motor to the rear wheels via propeller shaft. The BT-01 uses a plastic 4-bevel differential gear, and is compatible with TT-02 Hop-Up Options such as ball differentials and oil-filled differentials. Suspension components are also unitized for smoother pit work. Flip-up battery holders let you change the battery quickly. A transponder holder is also included – great for races! BT-01 can be assembled in 3 different setups, each offering 2 wheelbases: 251mm and 257mm. Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack and charger

Race-Oriented Buggy Chassis This chassis assembly kit is an upgraded version of the 4WD off-road TT-02B chassis kit with a wealth of extra parts. The drivetrain uses XV-02 oil gear differential units to adjust the effectiveness of gear differential, propeller joints with internal plastic parts to limit wear, front and rear universal drive shafts, and full ball bearings. Its suspension features new 3mm thickness carbon fiber damper stays to give more setup options, while the angle of rear wing high downforce is adjustable. Longer turnbuckle shafts help prevent plastic adjuster sections from deforming. Featured Components New aluminum propeller joints New carbon fiber damper stays Item 22049 XV-02/TT-02 Oil Gear Differential Unit Item 54501 TT-02 Aluminum Propeller Shaft Item 54768 06 Module Hard Coated Aluminum Pinion Gear (17T) Item 54993 TT-02B/DF-03 Aluminum Damper Set Item 53793 DF-02 Two-Way Aluminum Rear Uprights Item 54539 TT-02B Full Turnbuckle Set Item 53791 DF-02 Assembly Universal Shaft Item 53880 Large Dish Wheels (4WD/Front, 62/25) Item 53881 Large Dish Wheels (Rear, 62/35) Item 54211 TRF201 Rear Wing Set Item 54815 TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.) Item 54926 TT-02 Lower Deck (Hard/Black) Full ball bearings Features Turnbuckle steering and suspension arms can be adjusted quickly to fine-tune your setup. Assembly universal shafts help maintain speed when steering, for smoother cornering. High spec oil dampers have precision aluminum cylinders with a low-friction interior coating. This is the 3mm thickness front damper stay, which gives plenty of setup options. Oil filled gear differentials let you fine-tune performance with oil viscosity. This kit has dedicated differential joints. The kit features an aluminum propeller shaft with plastic inserts in the propeller joints to minimize wear. Aluminum rear uprights offer great rigidity to the benefit of your car's cornering. Switch left and right to alter toe. Assembly universal shafts also alleviate loss of efficiency when suspension is compressed. This image shows the 3mm carbon fiber rear damper stay, with adjustable wing stay. The kit includes the Neo Scorcher body and wing, plus the wing set Item 54211. Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit were chosen for users who want to learn setup before levelling up to mid-level Tamiya chassis kits. (More cost-effective than buying each part separately) Included Hop-up Option Parts Item 22054: 37mm Drive Shafts for Double Cardan Joint Shafts (2pcs.) Item 22049: XV-02/TT-02 Oil Gear Differential Unit Item 22047: XV-02/TT-02 Front Direct Coupling Set (39T) Item 54981: 06 Module Hard Coated Aluminum Pinion Gear (27T) Item 54886: TRF419 Suspension Upgrade Set Item 54799: TT-02 Hi-Torque Servo Saver Set (w/Aluminum Horn) Item 54501: TT-02 Aluminum Propeller Shaft Item 54500: TT-02 High Speed Gear Set (68T) Item 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) Item 53576: TRF Damper Oil Seal (4pcs.) Item 42357: Cross Joints for Low Friction Assembly Universal Shafts Item 42323: Short Ball Connector Nuts for TRF Dampers (8pcs.) Item 42143: 4mm Aluminum Serrated Wheel Nut (4pcs. /Blue) Features 1/10 scale R/C chassis assembly kit. The rear oil-filled diff gear unit and front direct spool ensure ease of assembly and stable drivability. Diff. joint cups are lightweight aluminum and give a weight reduction of 7.8g compared to Item 22049’s standard ones. Direct cups are designed for this chassis kit for improved durability. This chassis kit features dependable 4-wheel independent double wishbone suspension from Item 42345 (1/10 R/C TRF420 Chassis Kit) for effective setup options. Newly shaped propeller joints are compatible with swing shaft protectors. These parts use plastic parts at joint sections with stainless pins and aluminum joints to limit wear of parts. Uses Item 22054 37mm Drive Shafts which allows stable steering and cornering for superior performance at races. Rear drive shafts are 39mm size which are specific for this chassis. These also have a hard coat to enhance durability and lubricity. High speed gears and 27T pinion gears (gear ratio: 6.55: 1) are included as the kit-standard parts. Included TT-02 hi-torque servo saver allows steering angle limit to prevent damage of steering servo. Includes full ball bearings. Comes with a carrying case dedicated for the TT-02 Type-SRX chassis. Requires 2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with compatible charger, body, and tires.

This compact shaft-driven 4WD chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via front and rear propeller shafts. A longitudinal upright battery pack is positioned in the left side, contributing to optimum balance. Changing the rear section allows a choice from three wheelbases. The 4-wheel independent double wishbone suspension has aluminum-cylinder oil dampers. Front caster angle is 5 degrees, and hub carriers and uprights allow two types of ground clearance, while the front bumper skid angle reduces surface contact. Pro specification level R/C rally driving now comes to our M-Chassis size vehicle offerings!  This shaft-driven 4WD chassis assembly kit (M-chassis size) features three types of wheelbases, new suspension components and a polycarbonate chassis cover. Just pick your favorite Tamiya M-chassis size rally body and you’re ready to take on dirt! Features Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance. Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice-versa for drive balance bias to rear. Features a longitudinal upright battery pack position in the center-left for optimum balance. Front bumper with skid angle contributes to reduced surface contact. Aluminum dampers included. M-Chassis 11-spoke racing wheels (Item 51394) are paired with 60D rally block tires (Item 51427). Front and rear universal drive shafts included for optimum drive efficiency. Compatible with center diff setup and separately sold slipper clutch. Select Hop-Up Option parts for the XV-02 PRO chassis kit can be used with the XM-01. Low-profile servo is recommended. (Standard size servo can be used, but it meets the front inside polycarbonate cover.) Required to complete: 2-channel radio, low-profile servo, ESC, 540 size motor, M-chassis size body, 7.2-7.4volt battery with compatible charger. Featured Components Drivetrain  Front & rear oil-filled gear differentials (two 39T and one 40T included)  Front & rear universal drive shafts  Full ball bearings Suspension Aluminum oil dampers (blue caps)  5-degree caster suspension mounts  Turnbuckle upper arms Chassis Polycarbonate chassis cover  Front bumper with skid angle  Hi-torque servo saver Requires Body  Type 540 motor  2-channel R/C system  Battery pack & charger

Lamborghini Cheetah This R/C model assembly kit is a re-released and upgraded version of the kit which recreates a Cheetah prototype; a military vehicle announced at the 1977 Geneva Motor Show. Originally born from a collaboration with the American company MTI (Mobility Technology International), the Cheetah project aimed to create an all-terrain military vehicle for the U.S. market. The prototype was initially assembled in the United States and later finished at Lamborghini’s facilities in Italy. In what was for an off-road car an unusual mount over the rear axle, its engine was a waterproofed 5.9-litre Chrysler V8 offering 180 hp that sent power to a limited slip differential via a 3-speed automatic transmission. While the Cheetah prototype never entered production, it was still a testament to Lamborghini’s innovation and significantly enriched their technical expertise, representing an important experimental phase that would later lead to modern military vehicles such as the Humvee. Indeed, it served as fundamental testing ground for the subsequent evolution of the brand’s high-performance off-road vehicles, anticipating concepts later successfully implemented in the famous Lamborghini LM002, the first modern sports SUV. Features Length: 400mm, width: 174mm, height: 140mm The durable styrene plastic body (moulded in PS Desert Yellow) realistically depicts the angular, doorless form. Interior features such as meter panel, seats and fire extinguisher, and rear plate mesh are authentically depicted. The body is mounted inside front and rear for a more realistic look. Front and rear double wishbone suspension features upper and lower H-arms and adjustable flat-mounted, longitudinal metal torsion bar springs. A driver figure is also included The instruction manual includes a 4-language background story text of the actual car Chassis Features Based on the same chassis as Item 58004 1/12 XR311 Combat Support Vehicle, but with a 10mm shorter wheelbase The 2WD chassis has a lightweight, rigid duralumin U-shaped plate, and utilizes a lengthwise battery pack in the centre and a rear-mounted motor The receiver and ESC are positioned on either side in duralumin rear R/C equipment trays for optimum balance Sealed gearbox helps prevent dust and small stones from entering the model 4-wheel independent double wishbone suspension employs 4 adjustable flat-mounted, longitudinal metal torsion bar springs Updated semi-pneumatic tyres – which feature flat chevron tread pattern – are paired with durable threepiece wheels which have five screws to attach them to wheel hubs A duralumin front underguard protects the model in crashes Contents ESC Torque-tuned motor Body moulded in PS Desert Yellow Requires Transmitter & receiver Servo Battery and charger Tools to help with assembly of the kit LED lighting (optional)

At this stage we are unable to confirm exact numbers available so we will not take customer payment or confirm orders until we can confirm the numbers we can supply. Once exact numbers are avaliable, we will contact all customers who have placed pre-orders. Retail price will be AU$769.99 This radio control semi-truck recreates the Scania 770 S 8x4/4. The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. The actual S series in which this model faithfully recreates features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheel drive at the rear and double-axle 4-wheel steering at the front.This edition of the Scania 770 S 6x4 comes with the body pre-painted in TS-17 Gloss Aluminum, plus a urethane top coating for a high-quality finish. Tamiya’s series of ultra-realistic 1/14 scale R/C trucks has offered fun and realistic driving for the past several decades! This kit adds to the selection of trucks available in the series with the Scania 770 S 6X4! The kit seen here recreates the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020. Features The model realistically depicts the Scania 770 S 8x4/4, which uses a chassis that features numerous metal parts. The cab authentically recreated by precise injection molding, and its rear has detailed renderings of auxiliary machinery tower, fuel tank and air tank give it a heavyweight look. Just like the actual vehicle, this model has double rear-axle drive and double front-axle steering. It has the motor and transmission at the front on a metal ladder frame. Highly realistic suspension using metal leaf springs features lift axle. It can be moved up and down by hand at the second axle like the actual mechanism. Assembly type 3-speed transmission allows gear changes via separately sold 4-channel transmitter. Multi-Function Control Unit (Item 56523: MFC-03, sold separately) offers light, sound, and vibration operation. Interior parts such as modern-design dashboard and seats are included and can be installed together with the Multi-Function Control Unit.  Contents 1/14 scale driver figure, cab stickers and metal transfers to decorate the body. Requires 4-channel Tamiya Attack radio Two servos ESC 7.2volt battery with compatible charger Tamiya paints and finishing supplies.

The Konghead 6x6 is Tamiya first ever six-wheeled R/C vehicle ready to pound dirt, asphalt lots and neighborhood streets across the country! This model utilizes a new gear-driven 6WD chassis which is partially derived from the capable Tamiya GF-01 wheelie machine. The exceptional drive it provides will make for extreme fun while off-road driving. Furthermore, its powerful gear-driven setup allows the Konghead to take on slope inclines of up to 40 degrees!

The Nissan Leopard was released as a personal luxury car in September 1980; the 280X SF-L was its highest-grade model. The pioneering and distinctive two-door hardtop body featured excellent aerodynamic performance. It was powered by the inline-six L28E engine capable of 145hp and had 5-speed manual and 3-speed automatic transmission options. The suspension featured an auto-leveling system for the rear; the interior was also packed with luxury accessories like leather seats, an onboard drive computer with 6 functions, cruise control and automated climate control, which were standard attachments for the 280X SF-L. Fully packed with the newest technologies, this vehicle is known as a pioneer of Japanese personal luxury cars. Features This is a 1/24 scale plastic model assembly kit. Length: 193 mm, width: 75 mm, height: 56 mm. The angular two-door hardtop body is captured in style. Faithful depictions of the luxurious interior, chassis underside and suspension. Features a moveable sunroof; making the model interactive even after assembly. Metal-plated wheels are paired with synthetic rubber tires for realistic feel. Decals are included for the name logo, and metal transfers for interior and fender mirrors. A driver figure adds some extra life to the model.

This model kit recreates the Toyota Soarer 3.0GT Limited. Unlike previous releases of the model, this re-issue is updated with updated decals, instruction manual and metal transfers. The second-generation Soarer made its debut in January 1986, and the 3.0GT-Limited was its top grade. With the body featuring both luxury and functionality, the inline-6 twin cam turbo engine was capable of 230hp. This car also utilized the cutting-edge technology of the day such as the Toyota Electro Multi Vision and Space Vision Meter, in addition to the Toyota Electronic Modulated Suspension which was an electronically controlled air suspension system. Features 1/24 scale plastic model assembly kit. Length: 196mm, width: 85mm, height: 56mm. Features an authentic depiction of a 2,954cc inline-6 engine with auxiliary machinery. Front and rear suspension, and luxury interior are rendered in detail. Red griffon emblem decal - can be attached on top of engraving on front grille – is added to eliminate the need of painting. Metal transfers recreate emblems, side mirror surfaces and more.  

Fukuisaurus was a herbivorous dinosaur that lived approximately 120 million years ago during the Early Cretaceous period in what is now Fukui Prefecture in Japan. It is believed to have reached around 5.2 metres in length and lived alongside predatory dinosaurs such as Fukuiraptor. The dinosaur used its beak-like mouth to clip vegetation before grinding plant material with its rear teeth. Researchers believe it could move on both two and four legs depending on its activity and environment. Fukuisaurus became one of the most important dinosaur discoveries made in Japan and contributed significantly to the growing international recognition of Fukui Prefecture as a major centre for dinosaur research. Ongoing studies of fossils discovered in the region continue to improve scientific understanding of prehistoric life in Japan during the Early Cretaceous period. The Tamiya Fukuisaurus in 1/35 scale recreates one of Japan’s most important dinosaur discoveries with impressive detail and scientific accuracy. Developed with support from the Fukui Prefectural Dinosaur Museum and the Faculty of Dinosaur Paleontology at Fukui Prefectural University, this snap-fit model captures the distinctive appearance of the prehistoric herbivore. Part of the 1/35 scale figure and display kits range, the model features realistic body textures, detailed facial features, and a carefully researched body shape based on fossil evidence. The model accurately reproduces the stocky body, long forelimbs, and distinctive head shape of the Fukuisaurus. Fine moulded surface textures and carefully sculpted anatomical details help create a realistic finished appearance suitable for display or educational collections. The included scenery background can be coloured and used as a display backdrop, while the comparison figures help illustrate the size of the dinosaur relative to humans. Features 1/35 scale plastic model kit Snap-fit assembly, no glue required Approximate length: 130-140mm Detailed skin texture and facial features Display stand included 2D human comparison figures included Paper scenery background included Colour information leaflet included

A Versatile Workhorse Mobility was a key to all WWII militaries, and one way that Nazi German forces tried to secure it was through the use of semi track vehicles. The Sd.kfz.7 was one of the more famous examples, and found numerous applications in the war effort, from the transportation of personnel and supplies, to towing anti-aircraft pieces such as 20mm and 37mm guns, and even the rescue of stricken armor. Perhaps it is most noted, however, for its use in towing the famed 8.8cm anti-tank gun that German forces used to such great effect. Features This is a 1/35 scale plastic model assembly kit recreating the Sd.kfz.7 semi track. Length: 200mm. The sturdy form of the vehicle is recreated with accuracy, including the complex wheel placement. Front wheels are steerable. The driver's position features details such as instrumentation and pedals for an authentic look. Choose whether to assemble the kit with canvas hood up or down. Comes with no less than 8 figures, depicted in a variety of relaxed poses.

In the early stages of the war between Germany and the Soviet Union, the Marder II self-propelled anti-tank gun played an active role against the Soviet mainstay tanks, the T34 and KV-2. It became clear that the main German tanks of the time, such as the III and IV, and even the best anti-tank weapon of the time, the 50mm anti-tank gun, were ineffective. Under these circumstances, the 75mm anti-tank gun appeared with great expectations. Its performance was outstanding: it could penetrate 130 mm armor plate at a distance of 1,000 m using armor-piercing rounds and could fire 14 rounds per minute. focused on this high performance, the Marder II anti-tank self-propelled gun was built: an open-top fighting compartment configured on the body of the No. II tank, with a 75 mm gun mounted in it. Production began in mid-1942, and it served as an excellent pinch hitter. Features This plastic model kit reproduces the German anti-tank self-propelled artillery gun “Marder II”. 1/35 scale, 175mm in length. The open-top style model equipped with a 75mm anti-tank gun has a realistic appearance, and even the barrel base has been precisely reproduced. The inside of the battle chamber, including the inside of the bulletproof plate, radio rack and ammunition box, are also realistically reproduced. Crate, shells and empty shell casing to be mounted on the vehicle body are also provided. Gantry bell lock and ammunition box can be assembled in either battle or running condition. Two soldiers figures wearing field caps and looking forward are included.

Control Your Own Ausf.J! The Pz.Kpfw.IV fought through the entirety of WWII, and was a reliable workhorse for German forces. This R/C model assembly kit depicts its Ausf.J variant, utilizing compact gearboxes in the front, central pre-assembled turret rotation and gun elevation unit, and the MC-07 control unit in the rear. Just like a tank commander, take control of front and rear motion, pivots, turns, turret rotation and gun elevation. Assembly tracks use links to ensure that performance does not drop in slower speed ranges, and the hull parts are from a 1/35 Military Miniature Series model, ensuring plenty of detail. This assembly kit creates an R/C model of the German Tank Panzerkampfwagen IV Ausf.J. Late WWII German forces had great expectations for the incoming Panther, which was due to replace the long-serving Pz.Kpfw.IV; however, due to a delayed production schedule, the venerable Pz.Kpfw.IV actually continued to see front line service. The Ausf.J - the final Pz.Kpfw.IV variant tank, which went into production in 1944, was developed to suit defensive actions, and its chassis simplified to streamline use in other related vehicles such as assault guns. From Normandy to Italy, the Ardennes and even in the German homeland, the Pz.Kpfw.IV Ausf.J fought on until the end of WWII, proving a reliable counter to the ascendant Allies. Features 1/35 scale R/C model assembly kit. Assembly type tracks features snap-together links that realistically depict ‘sag’ and ensure stable motion even at low-speed operation. Full range of motion – forward and reverse, turns, pivots, turret rotation and even gun elevation and depression – is coordinated by the 4-channel TTU-10 transmitter, in conjunction with the MC-07 control unit. Includes two drive motors and two turret control unit motors. Four model speed options can be selected via the transmitter. Use the right stick on the transmitter to control turret rotation. The right stick also takes control of gun elevation and depression. Take a closer look at the model layout with front gearboxes and central turret rotation unit.  Plastic connectors make for safe and easy connection. Plastic tracks are snapped together link by link, achieving natural 'sag'. The turret comes with depictions of Schurzen shields. Plenty of accessories are included, such as jack, tools and spare track links. The rather boxy form of the tank is recreated with aplomb in 1/35 scale. Decals are included to create a choice of three tanks. The stick type transmitter offers control over tank motion, as well as its turret and gun. Requires Four separately sold AAA batteries each for transmitter and model.