Reset
TAMIYA
Tamiya 1/10 Mitsubishi Paje...
$153.95
An Old Favorite
Known in Japan as the Pajero, this venerable vehicle has been a worldwide hit since its debut in 1982, and here its body is given a comical reworking for use on this R/C model assembly kit. The boxy body is molded in durable and detailed plastic, with delightful details such as the cabin, bumpers and big over fenders. At the rear in the cargo space are a roll bar with spotlights, a tool case and more. Stickers are included to decorate the model.
The CW-01 Chassis
The 2WD CW-01 chassis is built around a tough box frame, with front swing axle and rear rolling rigid suspension setups and CVA oil dampers, plus white 5-spoke wheels and large-diameter tires for a dynamic off-road drive. Sealed to keep out dust and dirt, the gearbox contains a differential for smooth cornering, and the rear is fitted with a wheelie bar - give it some throttle for wheels-in-the-air action!
Separately Required Items
2-channel R/C system w/ESC
R6/AA/UM3 batteries for transmitter
Battery pack & charger
TAMIYA
Tamiya 1/10 Motul Autech GT...
$148.95
Take Home a Double Champ!
This R/C model assembly kit recreates the gun metal and red liveried Motul Autech GT-R that completed a magnificent brace of back-to-back championships with victory in the GT500 class of Super GT in 2015. The model has a highly realistic polycarbonate body and separate parts recreating the door mirrors and rear wing, as well as wing aerodynamic parts. Marking stickers are included to recreate the numerous sponsors and the red sections of the livery. The model is based upon the accessible and adaptable TT-02 chassis.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 6-spoke wheels are paired with slick tires for a racy finish.
Requires
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH Battery
Charger: To match selected battery Building and track equipment
ESC Electronic Speed Controller
TAMIYA
Tamiya 1/10 Plasma Edge II ...
$199.99
This exciting shaft-driven 4WD R/C buggy assembly kit creates the Plasma Edge II, and includes stylish polycarbonate body and rear wing parts. Marking stickers add to the racy mood of the model, as do fluorescent yellow star dish wheels and white CVA oil shocks. The TT-02B is a dedicated off-road buggy chassis that offers hassle-free assembly and maintenance, as well as superb controllability.
TT-02 B
The shaft-driven 4WD TT-02B buggy chassis employs a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus white CVA oil shock units, giving the car assured handling, while left/right suspension arms and uprights are identical to facilitate hassle-free assembly. Front/rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening a few screws, making maintenance a breeze. 4 different gear ratios can be applied with the use of 3 separately-sold types of pinion gear, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.
Requires
2-Channel R/C Unit
Battery Pack & Charger
R6/AA/UM3 batteries for transmitter
ESC Electronic Speed Controller
TAMIYA
Tamiya 1/10 Porsche 911 Car...
$279.95
The iconic Porsche 911 RSR 2.8 makes its way to the highly versatile BT-01 chassis! To faithfully recreate the motor and drive train layout as much as possible of the full-size car, this kit instructs the builder to assemble the chassis in the short wheelbase, midship rear motor / rear wheel drive (MR) setup. This layout configuration provides rear wheel drive handling excitement at every turn and exciting throttle response.
The Porsche 911 RSR 2.8
The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories.
BT-01 Chassis
The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ese of assembly and effective maintenance.
Features
1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm. Wheelbase: 251mm. (Short)
The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate.
Silver color wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547).
Separate molded plastic part recreates the side mirror.
Includes 540 brushed motor and ESC.
Requires
2-channel radio
Steering servo
7.2-7.4volt battery with compatible charger
Polycarbinate Paint for Body Shell
TAMIYA
Tamiya 1/10 Porsche 911 GT3...
$175.95
This is a limited-edition version of the Porsche 911 GT3 992) (Item 58722-A) kit with pre-painted, pre-cut body and wheel arches, great for not only beginners but also veterans of the hobby.
The R/C model assembly kit recreates the Porsche 911 GT3 (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis. The full-size 7th generation model, Porsche 911 GT3 features double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight components and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives a lightweight design. Also, hanging type wing stay supply greater downforce and lower drag.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD.
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.
Features
1/10 scale R/C model assembly kit. Length: 467mm, width: 188mm, height: 131mm
Wheelbase: 251mm (Short-size wheelbase spec).
Polycarbonate Body, rear wing and light cases are pre-painted in Brilliant Blue (PS-30) and Black (PS-5).
Separate plastic parts molded in black realistically depict side mirrors and wing stays.
The model uses the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
Dark gun metal color spoke wheels are paired with racing radial tires.
Comes with trim detail stickers.
Requires
2-channel Radio
Steering Servo
ESC Electronic Speed Control
7.2-7.4volt Battery with Compatible Charger.
TAMIYA
Tamiya 1/10 Porsche 911 GT3...
$162.95
This Tamiya R/C kit faithfully recreates the Porsche 911 GT3 CUP VIP customer race car. The 911 GT3 Cup car was developed for the Porsche Super Cup, a single-make racing series gracing circuits around the world. The VIP car recreated by this assembly kit was run by Porsche themselves and was driven upon invitation by a different driver according to the race. Its powerful form and rear wing are recreated expertly in durable and lightweight polycarbonate, with separately molded side mirror parts, plus metal-plated light cases that allow the installation of separately sold LEDs front and rear. Stickers are included in the kit to recreate numerous sponsor logos and other markings.
TT-01 E Chassis
The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability.
Features
1/10 scale R/C model assembly kit. Length: 465mm, width: 195mm, height: 134mm.
Polycarbonate body. Front and rear light cases are compatible with separately sold LEDs for a lit-up model.
Separate molded parts recreate side mirrors and racing rear wing.
Stickers are included to recreate a range of markings and logos.
Wheels are molded in Silver, and paired with slick tires.
This model runs on the short wheelbase (251mm) version of the TT-01 Type-E chassis, which features shaft- driven 4WD for easy handling.
Required Items: 2-Channerl radio, steering servo, 7.2volt battery pack with compatible charger, and Tamiya PS paint.
Requires
2-Channel R/C System
ESC (Electronic Speed Controller)
R6/AA/UM3 batteries for transmitter
Battery Pack & Charger
TAMIYA
Tamiya 1/10 Toyota Celica G...
$180.95
The classic Toyota Celica GT-Four (ST185) makes its way to the beginner friendly TT-02 chassis! The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time!
TT-02: Adaptable, Balanced Shaft Driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features
1/10 scale R/C model assembly kit. Length: 450mm, width: 187mm, height: 136mm. Wheelbase: 257mm.
Durable 1.0mm-thick polycarbonate body.
The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
5-spoke wheels are paired with tread pattern racing radial tires.
Comes with stickers and window masking tape for use in the painting process.
Includes ESC and 540-brushed motor.
Requires
2-channel radio
Steering servo
7.2-7.4volt battery with compatible charger
Tamiya PS paint
TAMIYA
Tamiya 1/10 Toyota Celica G...
$225.95
Tamiya classic car R/C replicas are a fan favorite!
This assembly kit recreates another 1990’s era favorite with the addition of the Toyota Celica GT-FOUR (ST205) on our easy to assemble and drive TT-02 chassis.
Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2-liter 4-cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans.
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels use semi-pneumatic treaded tires.
Features
1/10 scale R/C model assembly kit. Length: 451mm, width: 186mm, height: 134mm. Wheelbase: 257mm.
Durable 1.0mm-thick polycarbonate body.
The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.
10-spoke wheels molded in Gun Metal are paired with tread pattern racing radial tires.
Comes with stickers and window masking stickers for use in the paint job.
Includes 540 brushed motor and ESC.
Requires
2-channel radio
servo
7.2-7.4volt battery with compatible charger
Tamiya PS paints
TAMIYA
Tamiya 1/10 Toyota Celica G...
$162.95
This R/C model assembly kit recreates the Toyota Celica GT-Four (ST165) with a stunning and highly detailed polycarbonate body, which comes pre-painted! The kit is based on the beginner friendly and highly customizable TT-02 chassis, which is highly capable on asphalt and flat dirt for fun rally action!
Adaptable TT-02 Chassis offers balanced shaft driven 4WD.
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Features
1/10 scale R/C model assembly kit. Length: 450mm, width: 185mm, height: 130mm. Wheelbase: 257mm.
Lightweight, durable 1.0mm thick polycarbonate body.
The kit is based upon the shaft-driven 4WD TT-02 chassis which gives great adaptability with various kinds of setups.
Rally dish wheels molded in white are paired with tread pattern racing radial tires.
Comes with livery stickers and window masking tape for use in the painting process.
Requires
Electronic Speed Control/ESC (2-3S)
Servo
2-Channel Radio
7.2V Battery and Compatiable Charger
Paint eg Tamiya PS paints
TAMIYA
Tamiya 1/10 Toyota Land Cru...
$346.95
The Toyota Land Cruiser 40 has been a staple subject for Tamiya since 2008. It first appeared on the CR-01 crawler chassis then later the simpler CC-01 cross country chassis. Now, the classic Land Cruiser makes its way on to Tamiya’s newest cross-country platform, CC-02 with a few detail tweaks for the scale enthusiast!
Features
1/10 scale R/C model assembly kit. Length: 390mm, width: 198mm, height: 237mm. Wheelbase: 252mm (M-size wheelbase).
The CC-02 chassis is designed for a wide range of off-road driving expeditions and has a ladder frame which was inspired by full-size vehicles.
A roof rack with light pods is realistically depicted with separately molded parts.
New Yellow painted body
Silver color 12-spoke wheels are paired with block pattern tires. (Wide wheels are included
to recreate the customized look of this version.)
New stickers feature integrated tinted window and window frame sections to allow ease of
applying stickers and eliminate the need for painting the window tint.
Includes Motor.
Requires
Electronic Speed Control/ESC (2-3S)
Servo
2-Channel Radio
7.2V Battery and Compatiable Charger
Paint for Body eg Tamiya PS paints