TAMIYA Model Kits (192)

Modellers can choose from deployed or folded wingtips. Although this is an F-35 like Item 60792, over 60% parts are newly designed for this kit. Why not proceed with creating your own Joint Strike Fighter force in 1/48 and 1/72 scale? Features This is a 1/72 scale plastic model assembly kit. Wingspan: 182mm, fuselage length: 218mm The distinctive fuselage form of the F-35C – which has larger wings and horizontal stabilizers than other F-35 variants for slower aircraft carrier landings – is captured in style Choose one of the two assembly options: extended or folded wingtips There is plenty of detail showcased on the wing hinges Features newly moulded parts to recreate the reinforced nose landing gear with dual tires and rigid main landing gear, and tyres The newly moulded distinctive nose landing gear bay has realistic renderings of details such as ribs and pipes Fine recreations of Radar Absorbent Material (RAM) are moulded into fuselage surfaces Features a realistic rendering of the lower fuselage gun pod (the gun pod is not attached if using RCS enhancers) This kit also features realistic renderings of the following sections: Y- shaped air intake duct for highly advanced stealth characteristics Cockpit and landing gear bays Martin-Baker US16E ejection seat Engine nozzle (1-piece) RCS (radar cross-section) enhancers affixed to top during basic training exercises, but not in live action or more complex exercises Clear parts recreate canopy and Electro-Optical Targeting System (EOTS) fairing under the nose Includes parts to recreate AIM-9X Sidewinder x Masking stickers for the canopy and a realistically recreated seated pilot figure with Helmet-Mounted Display (HMD) included Comes with decals to depict 6 marking options (3 from United States Navy and 3 from United States Marine Corps)

During WWII, U.S. forces developed the M10 tank destroyer with 76.2mm gun, but it was not effective against powerful German tanks such as the Tiger and Panther. Perched upon the M10A1 chassis equipped with a 450hp gasoline engine, the M36 employed a new open top turret and a 90mm gun. The M36 saw its first action on the Franco-German border in October 1944 and continued until the German surrender in May 1945. Over 1,000 M36s were deployed among 21 battalions and contributed to the Allied forces’ advance. This model assembly kit recreates the U.S. Tank Destroyer M36. The subject was first released in 1968 as a motorized single motor kit. It’s now been recreated from the ground up with new tooling, except for the M2 machine gun and clear parts used in other Tamiya WW2 kits that use these newer parts. Features 1/35 scale plastic model assembly kit. Length: 216mm, width: 88mm. The form with open top turret is faithfully captured based on extensive research of the actual tank. Features new parts except for M2 heavy machine gun and transparent parts. The turret interior has details such as 90mm gun breech and auxiliary machinery. The jutting turret rear counterweight is realistically depicted with its curved form and cast surface patterns, and features ease of assembly thanks to the use of slide molding. The full interior has realistic depictions such as shell racks, floor and bulkheads. Includes parts to recreate exhaust deflector, tow hooks and tow cables. Ammunition cases and one full body tanker figure included. Assembly type tracks have one-piece straight sections. Comes with two marking options to recreate a 3rd Army vehicle in Luxembourg or a 774th Tank Destroyer Battalion vehicle in Germany.

The Porsche 956 flourished at endurance races, and evolved into the Porsche 962C in 1985, being provided to many private teams. The car of Swiss racing team Brun Motorsport featured the distinctive bright orange Jägermeister livery, and was victorious at World Sports Prototype Championship and German races. Features This is a 1/24 scale plastic model assembly kit. Length: 197mm, width: 85mm, height: 44mm. The streamlined, aerodynamic form is faithfully captured in style. Integrated front and side windows. Authentic depctions of the cockpit and suspension. Realistic racing slick tires.

The GR Supra is a Toyota two-seater sports car released in January 2019, whose sensuous long nose, short deck form has a striking double-bubble roof. The top grade RZ model has a 340hp inline-six turbo engine. Plenty of custom parts called GR Parts are offered by TRD (Toyota Racing Development) for various customizations. Components such as carbon fiber aerodynamic parts, forged aluminum wheels and sports muffler provide superior performance. Owners can enjoy customizing this car as they like to get their ideal drive. Features This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. The dynamic, elegant form with aerodynamic parts such as spoilers and side skirts is captured in style. A realistic rendering of the interior. The underside has depictions of suspension, exhaust system and more. 19-inch wheels by Toyota Racing Development are also recreated. Metal transfers and masking stickers are included.

The Honda Prelude is a Japanese sports car that was first presented to the public in 1978. Its serial production started in the same year and lasted until 2001. During it, the model was manufactured only in the city of Sayama in Japan. In total, approx. 825 thousand jobs were created. cars of this model. The Prelude model did not have a direct predecessor in the Honda Motor Company offer, but was developed and put into production in order to fight the market with cars such as Toyota Celica, Nissan Silvia and Mitsubishi Eclipse. The new car was based on many solutions used in the Accord and Civic models. Suffice it to say that the first generation of cars of this type was built on the platform of the Civic II models. This condition did not change until 1982, when the 2nd generation Honda Prelude appeared. Like the models mentioned above, Prelude had a chassis with a self-supporting body. During series production, the car was offered primarily as a 2-door coupe, and the range of engines included engines with a capacity of 1.6 to 2.3 liters.

The Audi quattro played a major role in moving four-wheel drive vehicles away from being the strongly exclusive domain of heavy off-road cars. It was one of the stars of the Geneva International Motor Show in 1980; while the body was similar to the Audi Coupé, its flared fenders and spoilers front and rear hinted at its high performance, but its full-time four-wheel drive was naturally the main talking point. Differentials at the front and rear were joined by a center differential in a setup that checked numerous boxes: smooth road driving; superior speed and cornering; and exceptional stability. Power was provided by a 2,144cc inline-five engine with a turbocharger and intercooler that output an impressive 200hp, while the front and rear had MacPherson strut suspension and disc brakes, which were a ventilated design at the front. In 1981 a rally version of the car debuted and took the global circuit by storm, winning multiple races and opening the door for other 4WD rally cars. Its influence was also felt in the road car arena, and while the car itself remains an ageless classic, the “quattro” name is also still used by Audi for its four-wheel drive system. Features This is a 1/24 scale plastic model assembly kit. Length: 185mm, width: 79mm, height: 57mm. Blister fenders and rear spoiler are recreated on this realistic rendering of the legendary 2-door coupe Audi quattro. Authentic metaphors of the inline-5 engine, suspension and four-wheel drive system.  The interior features recreations of seats, dashboard, shifter and more. Decals are used for the seat patterns.  Treaded solid synthetic rubber tires.  A driver figure is included.

This model kit recreates the 1981 Mercedes Benz 500 SEC. The model kit was originally released in 1982. The re-issue comes with updated decals, instruction manual and packaging. About the Mercedes Benz 500 SEC Mercedes-Benz has long enjoyed a leading position in the automotive world. The 500 SEC made its debut as a top luxury coupe of its day in fall 1981. This car featured an aerodynamic 2-door hardtop form with four seats and was powered by a 5-liter V8 engine which was capable of 231hp and provided a 225km/h top speed. The 500 SEC really was the complete package, offering performance, luxury and reliability, and setting the standard for its successors in all areas of the car market for years to come. Features 1/24 scale plastic model assembly kit. Length: 209mm, width: 87mm, height: 60mm. Features realistic depictions of 5-liter V8 engine and interior. The engine hood is removable. The drive system, 4-wheel independent suspension, propeller shafts and chassis underside are faithfully depicted. The interior has realistic renderings of details such as the instrument panel and seats. Updated decals recreate instrument panels, logos, patterns of wood panels and seat surfaces. Features solid synthetic rubber tires with tread patterns. Instructions depict three body colors for painting: silver, white and gold.

U.S. Light Tank M5A1 Stuart Specification Number:32606 Scale: 1:48 Type: Full kit

Re-issue of Tamiya's kit of the super-seller Honda coupe from the 1980s. This version includes the "Mugen" ("unlimited") trim parts designed for the car by the company of the same name. Rubber tires, wheels turn and steer. Detailed undersurface and interior. No engine parts. Item Size/Weight: 29 x 19 x 5.2 cm / 230g

This photo-etched parts set is for the 1/24 scale model of the Ferrari FXX K. Using these photo-etched parts enhances the detail of the already-precise model even further, and gives your masterpiece a sharp finish. Specification Photo-Etched Parts Fret x1 Seatbelt Decal Sheet x1 Photo-etched parts depict mesh areas on front/rear bumpers, radiator cover and more. These can be used to replace the nylon mesh and mesh-patterned decals included in Item 24343 FXX K kit. Parts do not require cutting out, making them also suitable for beginner modelers. Separate decal sheet offers ultra-realistic recreation of seatbelts. For use with Item 24343 1/24 Ferrari FXX K. Instructions included.

The original 1969 Honda Dax was a follow-up to the wildly popular Monkey series. The new Dax 125 was introduced in 2022 and retains all the style of the original with modern motorbike performance. Designed to be ridden by anyone, anywhere, at any time, the Honda Dax 125 has been well-received around the world. This 1/12 scale Limited Edition model of the Honda Dax 125 from Tamiya features beautifully detailed plastic parts with multi-media details. The finished model is 14.7cm long and 10.3cm high. Honda’s Dax traces its history back to its debut in 1969, and in March 2022 the Dax was brought right up to date with the Dax125, a model which still draws heavily on the original’s identity with facets such as the T-bone frame. Its 123cc engine is paired with a 4-speed transmission that can be shifted without rider clutch input, making it an excellent touring option. The Tamiya Limited Edition version of the bike was released exclusively in Thailand and has a sumptuous metallic blue frame adorned with a multitude of limited edition parts. Features Length: 147 mm. Image shows painted and assembled kit. This is a 1/12 scale plastic model assembly kit. Length: 17mm, width: 67mm, height: 103mm.  The unique Dax form is captured in style, with a parts breakdown designed for easier assembly and painting jobs.  The 123cc 4-stroke single cylinder engine is depicted in detail.  Engine, swing arm and front fork are attached to the frame using screws.  Metal-plated parts recreate muffler guard, side cover and more.  The rear damper has a metal spring.  Treaded synthetic rubber tires.  Choose whether to assemble as a standard version or the Tamiya Limited Edition.  Comes with a 1/12 scale helmet. Contents Plastic part for assembling the Honda Dax125 motorcycle Rear damper spring Vinyl pipes for accel wiring Brake hose Plug cord Helmet with the Tamiya logo Two options: Normal version (Pearl Nebula red or Pearl Ca det grey) Tamiya Limited Edition

This model kit figure set recreates German Machine Gun Troops recreated by cutting- edge molding technology. During WWII, the German Army employed two types of machine guns – MG34 and MG42 – as the nucleus of their small arms. These machine guns had powerful firepower and high firing speed. Additionally, using folding tripod Lafette and the telephoto optical sight helped these machine guns worked at long range. The attachment of loader magazine allowed firing by one soldier. A machine gun team normally had from three to five soldiers: one pair (one gunner and one loader) and other soldiers who carry ammunition, spare gun barrels and tripod. Their mission ranged from defense from enemies to support of troops. Features 1/35 scale plastic model assembly set. German machine gun troops authentically capture the middle-WWII period. Contains parts for 5 figures in a realistic pose: soldier firing with the MG42, main and sub gunners shooting with the Lafette, a commander supporting them and ammunition carrier replenishing ammunition. Newly molded components have realistic renderings of details such as Lafette and accessories. Ammunition cases are rendered in detail with slide molding. Make diorama with 1/35 scale kits recreating tanks and armor which appeared during WWII.

This model kit in 1/20 scale recreates the Toyota Celica LB Turbo Gr. 5 (originally sold as Item 20009 in 1978; not motorized this time) with new Cartograf decals, new slick tires, and instruction manual. The Toyota Celica LB Turbo was a Group 5 car developed for the 1977 DRM (German Racing Championship). Based upon the road car Celica Liftback, the car featured aerodynamic components such as bulging over fenders and rear wing and employed numerous FRP body panels. An extensively modified body and 2,090cc, 560hp inline-4 DOHC turbo engine were utilized for its racing endeavors. This car made its debut in July 1977, and in October of the same year, it beat the Porsche 935 and achieved its maiden victory. Features 1/20 scale plastic model assembly kit. Length: 240mm, width: 105mm, height: 61mm. Features authentic renderings of engine and cockpit with roll cage. Removal of the front cowl showcase renderings of inline-4 engine. Includes high quality, new Cartograf decals. One full body driver figure is included. Features realistic solid synthetic rubber slick tires. Comes with two marking options to depict no.68 and 56 cars.  

This model kit recreates the Toyota Soarer 2000VR-Turbo with updated decals and instruction manual. The Toyota Soarer made its debut in Feb- ruary 1981 as Toyota’s first personal luxury car. This 2-door hardtop coupe featured a long nose with short deck and high-quality inline-6 engine, plus an array of the latest auto technology for the interior. Inheriting the same streamlined form, the Soarer VR-Turbo – a grade added in June 1981 – utilized the inline-6 turbo engine capable of 145hp. Features 1/24 scale plastic model assembly kit. Length: 192mm, width: 75mm, height: 56mm. The slide sunroof can be opened and closed. Choose from steel type or glass type. Features realistic renderings of interior and chassis underside. Realistic synthetic rubber tires. Decals authentically depict seat patterns and body stripes. One driver figure is included.

The GMA T.50 or Gordon Murray Automotive Type 50 is a sports car manufactured by Gordon Murray Automotive. Designed by Gordon Murray and inspired by the McLaren F1, the T.50 is powered by an all-new bespoke 3,994 cc (4.0 L) naturally aspirated V12 engine developed by Cosworth. Gordon Murray designed the McLaren F1 and Brabham BT46B, and the GMA T.50 is named for his 50-year career and his 50th design. Tamiya has faithfully captured the GMA T.50 in every detail! It comes in 1/24 scale and is sure to attract car enthusiast aficionados and modelers alike around the world! Features 1/24 scale plastic model assembly kit. Length: 181mm, width: 77.1mm, height: 48.5mm (68.5mm when opening the hood). The V12 engine is faithfully recreated. A large fan at rear has realistic depictions of internal ducts to show the air flow of actual car. Open or closed gullwing engine hood can be chosen even after assembly. (Driver and passenger doors cannot be opened.) Photo-etched parts are included to depict the mesh sections of rear bumpers and are attached without using instant cement. The body is composed of a single, upper monocoque part onto which transparent window parts are attached individually without using cement. Black window frame sections are integrated with a single, upper monocoque part, which eliminates the need for masking and painting of window parts. Newly designed wheels are paired with treaded tires. Includes decals and metal transfers.

Japan's representative sports car, the 6th generation of the Nissan Z was released in December 2008. Although the wheelbase was shortened by 100mm from the previous model, the classis’ long-nose, short-deck design was kept and the fenders were pushed out to create its muscular, athletic look. The car is powered by a 3.7 liter DOHC V6 engine, and the 6-speed manual transmission version has the world’s first SynchroRev Match system which can adjust the engine’s RPM during downshifts for a smooth heel-and-toe effect, making it more enjoyable to drive. Features 1/24 scale plastic assembly kit. Length: 176mm, Width: 77mm. The muscular form of the car has been realistically reproduced. The interior has a rich finish and can be assembled either in left-hand or right-hand drive versions. Included gloss and matt metal plated parts enhance realism. The unique boomerang shaped head and tail lights can be easily assembled with clear and clear-red parts. Metal transfers are included to depict the Z emblems and side mirror surfaces. Optional front and rear spoiler parts included.

Tamiya 24363 1/24 Nissan Z (Fairlady Z) (RZ34) Nissan’s sports car, Fairlady Z (named “Nissan Z” in global market), whose North American specification was announced in August 2021 and Japanese specification in January 2022. The 7th generation features a design that pays homage to successive models with the main theme of “fusion of tradition and state-of-the-art technology”. Equipped with a 405-horsepower 3-liter V6 twin-turbo engine at the front, it combines a 6-speed MT or 9-speed AT transmission to drive the rear wheels. As a pure engine model, it attracted the attention of fans around the world. Features The sharp form of the 2-door fastback coupe has been faithfully reproduced. The outer panel of the body and roof is composed of separate parts. Separate parts such as the lower part of the transmission and front and rear suspension arms give the underside of the chassis a three-dimensional finish. The seat is divided into 4 sections for ease of painting. Comes with masking stickers for coloring transparent parts. You can choose to assemble either Japanese or North American specifications. Emblems and logos are recreated with inlet marks. Tires are made of solid rubber. Specification 1/24 scale plastic model assembly kit. Length 183mm, Width 84mm, Height 55mm.

This model assembly kit recreates the 2021 Subaru BRZ as a 1/24 Sports Car Series product. The BRZ – Subaru’s first rear-wheel drive sports car, which debuted in 2012 - welcomed a second model in April, 2021. With the basic style carried over, the car features a low center of gravity with a 2.4-liter horizontally opposed four-cylinder boxer engine capable of 235hp. This engine offers higher power and torque and the best balance of easy handling and superior performance. It also employs the modular unibody automobile platform Subaru Global Platform (SGP) to facilitate improved rigidity and collision safety, plus Subaru’s original driving support system EyeSight. Features The model recreates the front fenders’ air outlets, side sill spoilers, and the other aerodynamic parts. Suspension detail features front strut and rear double wishbone systems. Details such as a 2.4-liter horizontally opposed four-cylinder DOHC engine are faithfully depicted and the hood can be held open by a stay. Differences from its sister car the Toyota GR 86 are accurately captured: front bumper and lights, rear stabilizer direction, and more. Wheels are paired with solid synthetic rubber tires. Features realistic renderings of the car undersurface details such as propeller shafts, suspension and mufflers. Shift knob, 3 pedals for manual transmission, seats and lever-type side brake details. Window frames are molded with window parts while right/left frames on the roof top are separate parts for hassle-free painting job. Metal-plated parts are included to recreate taillight/reverse light cases and muffler end. Comes with masking stickers for use when painting window and taillight cover areas, and metal transfers to add realism to side mirrors and rear-view mirror. Specifications 1/24 scale plastic model assembly kit Length: 178mm, width: 74mm, height: 55mm  

Small but Mighty Tamiya announces the appearance of an all-new version of the Kettenkraftrad, which was originally developed for commando units but was found to be highly useful on the poor terrain in Russian territory. The model gives you more realistic scenery with three infantry figures and a cart is also included. Features realistic depiction of suspension and the wheel positions based on research of the real vehicle. Engine hatch can be assembled open or closed, and it uses photo-etched parts for grille. This kit includes a trailer with depiction of canvas cover, plus driver and infantry figures (three in total). High quality, precision plastic model kit. Paint and glue not included. Requires assembly and painting. For intermediate to advanced skill modellers.

NISSAN Fairlady Z is an indispensable vehicle for talking about the history of sports cars in Japan and around the world. The first S30 model set an amazing record for a sports car with global sales of more than 520,000 units in the nine years from 1969 to 1978. Among them, the 240ZG is the highest-end model for domestic use that was added in November 1971. The aero dyna nose with integrated bumper, front and rear over fenders, and headlamp cover are standard equipment, and the 2.4-liter engine demonstrates high driving performance. As a pure sports car with a powerful style and enjoyment of driving, it is still being traded at a high price among automobile fans all over the world and is gaining enthusiastic support. Features 1/24 scale, total length 179 mm, total width 71 mm, total height 53 mm plastic model assembly kit. The fast-back coupe form of the long nose and short deck is faithfully reproduced on the actual vehicle. The 2.4-liter in-line 6-cylinder engine has a precise finish for twin carburetors, oil pans, and missions. The bonnet can be opened and closed, and you can appreciate the engine even after it is completed. The rims of the window molding and headlamp cover are plated parts. The wheel is divided into 3 parts for ease of painting.