TAMIYA (819)

Tamiya S7807102 Airbrush Nozzle 0.2mm for T745514

The Japanese Navy's Last Heavy Cruiser The Chikuma was completed in May 1939 as the second ship of the Tone-class. She was the final heavy cruiser to be built by the Japanese Navy and featured a distinctive design which concentrated four twin 20.3cm main gun turrets forward of the bridge in order to allow unimpeded launching of her six floatplanes from the aft deck during battle. Chikuma often accompanied the Japanese Navy's aircraft carriers since her floatplanes provided considerable reconnaissance capabilities to the fleet, and she was present at such important engagements as the attack on Pearl Harbor and the Battle of Midway. She continued to serve valiantly until her demise at the hands of U.S. carrier aircraft during the Battle of Leyte Gulf in October 1944. Features This is a 1/350 scale plastic assembly kit of the Japanese Heavy Cruiser Chikuma. Length: 576mm, Beam: 71mm. The sharp form of the ship has been accurately reproduced.  Model depicts the Chikuma in early-war form, prior to being refitted with additional equipment.  Differences from the Tone such as the signal lights and rangefinder antennas are faithfully depicted.  The ship's hull separates into port and starboard parts and one-piece lower hull helps to produce the form of the beautiful bow.  The turrets feature precision-molded panel lines and radiator slits.  Parts such as masts and antennas are made from strong ABS plastic parts.  Bridge windows and searchlight lenses are reproduced with clear plastic parts.  Metal parts depict anchor chains and propeller shafts.  Nakajima E8N and Kawanishi E7K floatplanes can be set on the deck. Display stands for depicting aircraft in flight are included.  Full hull model display stand included.

Discover the Tamiya RC Fighter NXGEN 1/10 ( Ref 58741 ), a radio-controlled buggy inspired by the famous American single-seater racing cars.  Its all-new DT-04 chassis with two rear-wheel drive makes assembly easy and offers a modular design to adapt to all terrains.  With parts common to both the DT-02 and DT-03 chassis , you benefit from a wide variety of configurations and a wide choice of options to boost your performance.  The bodywork combining tubular structure and polycarbonate panels underlines the off-road character and modernity of the  RC Fighter NXGEN , ideal for enthusiasts looking for robustness, liveliness and ease of maintenance. The Tamiya RC Fighter NXGEN (Ref 58741 ) innovates with the DT-04 chassis , designed for easy assembly and precise piloting . Its parts derived from the DT-02 and DT-03 chassis , its hydraulic shock absorbers and its tubular body give a resolutely racing look. Choose your wheelbase (265 mm or 280 mm) to optimize handling or stability, and launch yourself into the off-road assault! The Tamiya RC Fighter NXGEN (Ref 58741 ) represents the new generation of RC buggies thanks to an ingenious DT-04 chassis , modular and compatible with many parts from other Tamiya ranges . Its design inspired by US single-seaters , its tubular body and its ease of assembly make it a first-rate choice for any RC model enthusiast , in search of robustness , driving pleasure and future evolution. Embark on an off-road adventure with this buggy that will not fail to surprise you with its versatility and unique style! A new DT-04 chassis Robust bathtub frame , designed to withstand shocks. Longitudinal battery pack and rear motor for optimum rear wheel traction. Differential under sealed housing, ideal for tackling dusty and wet terrain. Possibility to choose between two wheelbases : 265 mm for liveliness or 280 mm for stability. Advanced suspension and steering Four-wheel independent suspension with CVA hydraulic shock absorbers . Front suspension attack angle of 22.5° for improved clearance . Adjustable mounting points for the rear shock absorbers, allowing geometry to be adjusted according to riding style . Three-link steering system , a first in this range, providing quick and precise course changes. Bodywork inspired by US buggies Tubular plastic structure with polycarbonate panels , offering lightness and resistance. Tilting roof using a lever and pins , facilitating access to the battery pack. Pilot figure (torso) included, paintable for added realism. Two marking options (blue or red) to personalize your RC buggy. Versatility and compatibility Suspension and drive shafts from the DT-02 and DT-03 chassis , ensuring wide compatibility with existing Tamiya options . Hexagonal hubs at the front allowing the installation of different wheels. Grooved tires at the front and square-pitch tires at the rear for optimum off-road grip. Equipment Included and Required Torque Tuned Motor and variator already included for quick start. Requires RC equipment (transmitter, receiver, servo), battery pack and charger (not included). Accessible assembly, ideal for beginners and experienced users wanting an evolving RC kit.

Tamiya welcomes this limited edition version of Item 58740 1/10 R/C Porsche 911 Carrera RSR 2.8 (BT-01) (short wheelbase and midship rear motor / rear-wheel drive (MR)) with the polycarbonate body pre-painted in White (PS-1) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans. Drive to feel the legendary machine Ever since its debut in 1964 cars with the Porsche 911 name have set pulses racing worldwide, and in that legendary pantheon the Carrera RS 2.7 occupies a special position. Developed to join European GT car races, it first broke cover at the 1972 Paris Auto Salon , sporting a powerful 2.7-liter horizontally opposed six-cylinder engine, further refined aerodynamics and lightening across the board. The Carrera RSR 2.8 was even racier and really brought home the bacon in 1973, victorious in the 24 Hours of Daytona, 12 Hours of Sebring and Targa Florio. This assembly kit R/C model recreates the RSR 2.8 with a polycarbonate body capturing the mesmerising form with ducktail and bulging fenders. Options Galore: the 2WD BT-01 Chassis The 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear-wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized Sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. Ever-changing: 2WD BT-01 chassis The easy-to-use 2WD BT-01 chassis provides two different wheelbases, and you can choose a front- or rear-wheel drive system, making the model closer to the real car. Without removing the battery, motor and remote control components, it can be converted to front-wheel drive or rear-wheel drive by changing the final transmission gear and steering axle. When rear-wheel drive, you can also choose front (FR) or rear (MR). Two motor positions. The 4-wheel double-wishbone suspension system equipped with friction shock absorbers has a symmetrical design front and rear. The componentized design of each part such as the "motor seat assembly", "final transmission gear assembly", and "suspension assembly" makes assembly easier and improves maintainability. Features The modular structure of each part makes the BT-01 chassis easier to assemble and maintain. The servo is housed in the right rear, with a long link rod used in the 3-piece setup. A 3-piece steering system controlled by a servomotor installed on the right rear of the vehicle body extending out a long link. The double-wishbone suspension uses symmetrical arms. he suspension system is a symmetrical double wishbone design. While coil-sprung dampers are fitted as standard, the BT-01 can be used with separately sold TRF Special Dampers (Hard Black Coating). Friction shock absorbers are standard. It can also be replaced with an optional TRF special shock absorber (black reinforced coating). The unitized motor mount is affixed to the chassis with 2 screws. Some parts of the modular motor base can be attached and detached on the chassis with only 2 screws. Power goes from the midship rear motor to the rear wheels via propeller shaft. The mid-mounted motor transmits power to the rear wheels through the drive shaft. The BT-01 uses a plastic 4-bevel differential gear, and is compatible with TT-02 Hop-Up Options such as ball differentials and oil-filled differentials. The differential is the same resin-made 4-bevel gear type as the TT-02 chassis. Can be replaced with an optional TT-02 ball differential or oil-filled differential. Here is the rear double-wishbone suspension. As the car corners, rear wheels gain toe-in for better stability. Shown here is double wishbone rear wheel suspension. The wheel toes tilt in to ensure stability when turning. Suspension components are also unitized for smoother pit work. The componentized suspension system can provide excellent maintainability. Flip-up battery holders let you change the battery quickly. The flip-up battery cover makes battery replacement faster. A transponder holder is also included – great for races! Equipped with an answering machine holder to make participating in the competition easier. As illustrated here, the BT-01 can be assembled in 3 different setups, each offering 2 wheelbases: 251mm and 257mm. The chassis can be configured as front-wheel drive or rear-wheel drive. When rear-wheel drive is available, two different motor installation positions can be selected. The wheelbase is also available in 251mm and 257mm. Requires 2-channel R/C system Servo motor for steering R6/AA/UM3 batteries for transmitter Battery pack & charger Sold  separately 2ch remote control unit Steering servo motor Transmitter uses AA batteries Rechargeable batteries and chargers for remote control cars

This is the mechanical speed control that comes stock with the Hornet. Features Two speed forward and reverse Includes Rotary switch with wiring, 7watt ceramic resistor, heat shield, mounting hardware, and complete instructions.

Tamiya Colour bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Finished tough membrane suits ideally to use as a base coat, resistant to enamel paints, while swift drying times ensure an efficient painting process. We recommend using Tamiya's Lacquer thinner with this paint type. Bottle contents: 10ml Colours may vary slightly from Tamiya Color Acrylics and Sprays with the same name.

Tamiya Color Acrylic Paints are made from water-soluble acrylic resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. These Tamiya Color Acrylic Paint products contain 23ml of paint. It is recommended to use Tamiya acrylic thinners for thinning paints for use with an airbrush.Colours may vary slightly from Tamiya Color Lacquers, Enamels and Spray Paints with the same name.

Tamiya Colour bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Finished tough membrane suits ideally to use as a base coat, resistant to enamel paints, while swift drying times ensure an efficient painting process. We recommend using Tamiya's Lacquer thinner with this paint type. Bottle contents: 10ml Colours may vary slightly from Tamiya Color Acrylics and Sprays with the same name.

Certified authentic Tamiya consumable finishing product, designed and produced in Japan.

The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.

The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.

Tamiya Color Acrylic Paints are made from water-soluble acrylic resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. These Tamiya Color Acrylic Paint products contain 23ml of paint. It is recommended to use Tamiya acrylic thinners for thinning paints for use with an airbrush.Colours may vary slightly from Tamiya Color Lacquers, Enamels and Spray Paints with the same name.

These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contain 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying the body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.

These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing one complete model. Painting polycarbonate bodies is done from the inside of the body shell as opposed to the outside of a traditional plastic model. When spraying body from the inside, keep the can about 30cm from the surface. After curing apply another coat as necessary. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Warning: Never use these paints on plastic models.