PECO (179)

Peco Products SL-180 OO Gauge (1:76 Scale) Finescale single slip insulfrog (code 75 rail)

Large. 228mm x 737mm. (9in x 29in).

16/0.2mm 3 amp. Length 7m (approx 23ft)

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily extended using PL-39 Terminal Blocks and PL-38 Red and Black wire. 4 pairs per pack. Length: 204mm SL-100 00/H0 Track SL-700BH 0 Gauge Track SL-500 0-16.5 Track  

Original Peco railroad scale accessory for HO and OO guage railroad sets.

Nominal radius: 1828mm (72in) Angle: 12deg. Length: 220mm (8 5/8in).

As easy as 1-2-3. Insert PL-26 switches into the slots of the PL-50 unit. PL-51 add on units can be easily added on the side. No soldering makes changes easy and safe for modellers of all ages.

Invaluable wiring aid - no soldering required. Two strips of 12 blocks, easily cut into smaller units.

Wheel Cleaning Brush

Nominal radius; Outside 1524mm (60in). Inside; 914mm (36in). Length; 282mm (11 1/10in).

PLS-130 SmartFrog - If the SmartSwitch system is used to operate PECO Electrofrog turnouts, the polarity of the frogs can be changed automatically, electronically and 100% reliably, when the servo moves the blades across, by adding a SmartFrog to each turnout. LEDs can be added to the SmartSwitch or SmartFrog to show the directional status of each servo-ideal for control panel route indicators or operating 2-aspect signalling. Original Peco railroad track scale accessory for HO and OO guage railroad sets.

Wheel Scraper

Peco Code 75 Left Hand Medium Radius Turnout

Length: 98mm (3 7/8in).

Nominal radius; 1702mm (67in). Angle; 7.15degrees. Length; 322mm (12 11/16in).

Single slips were often used on double track lines to incorporate a trailing crossover into the access for a siding, goods yard etc. If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together. The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings. Layout plans suggestions can be found in our publications ‘Track Plans for Layouts to Suit all Locations’ (Ref PM-202), ‘60 Plans for Small Railways’ (Ref no PB-3), and ‘Track Plans for Various Locations’ (Ref no PB-66). Specification Length: 249mm Frog Angle: 12 Degrees SL-10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track SL-11 Insulated Rail Joiners for PECO Code 100 track SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork

Original Peco railroad scale accessory for HO and OO guage railroad sets.

Peco Code 75 Right Hand Medium Radius Turnout

A servo driven point switch system including control board  The set comprises of the following components: SmartSwitch Board - the brains of the system Programming board - used to set the speed and desired movement of the servo 4 x servo motors - including all brackets, fixings and template stickers for positioning 4 x 1m cable - with plug-in sockets Easy-to-follow set-up manual Set-up is easy; all connections to the SmartSwitch board simply plug together or attach to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full, plain-English instructions are included with each set.

SmartSwitch has arrived, the latest addition to the Pecolectrics range. This innovative servo-controlled system is ideal for operating turnouts, signals, gates, and any other animated feature on layouts of all scales and gauges. Each servo has a mounting bracket included and everything to connect it up to a turnout is supplied, with a variety of mounting options.