Hobby Glue (131)

This clear putty hardens under sunlight or UV light. The thickness and adhesive strength have been adjusted for model making. The resin is designed so that colored UV putty can be created by adding water-based hobby colors. (After mixing, use within about 5 minutes. Add no more than 5% of the putty. Adding too much paint may result in poor curing or extended curing time.)  *Please use a commercially available UV light.  Features The composition is designed so that it can be colored with water-based hobby colors. We recommend the water-based hobby color version of Iro no Gen. It has a meaty texture, so it's easy to make thick objects. Less tacky after curing Even if new putty is applied on top of hardened clear putty and allowed to harden, it will not easily peel off from the applied surface. Use on top of foil stickers to create simple jewel stickers.

Mr. Cement S is a low-viscosity adhesive. Unlike the viscous resin-containing Mr. Cement, this is a smooth liquid type. By pouring it into the gaps between parts that have been joined together using capillary action, the parts are strongly bonded together. Compared to Mr. Cement SP, it dries more slowly, so you can make fine adjustments after applying this cement if you do so before it dries. It is ideal for areas that require large areas and strength, such as the turrets of tank models, the wings of airplane models, and the bottom of ship models. It is also effective for bonding track parts of tank models. The cap is equipped with a face brush that is convenient for pouring into the joints.

Mr. Cement DX is an expanded version of the standard plastic model adhesive, Mr. Cement. It is viscous because it contains acrylic resin. Please use it when gluing polystyrene (PS/polystyrene) plastic models. Since resin remains after drying, it is best used when gaps between joints are noticeable or where strength is required. A brush is attached to the cap.

Mr. Melt Putty is a liquid lacquer putty that is ideal for filling large scratches, dents, and sink marks on the surface of parts. It has a higher viscosity than Mr. Surfacer 500 and has good buildability, so it is suitable for applying in piles. Use a Yoji or Mr. Glue Applicator to apply it. It canalso be used to recreate a cast surface by tapping it onto the surface of the part using a Mr. Weathering Brush.

Replacement top that is on all of BSI's non-Pocket CAs. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle.

Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and their adhesive residue. INSTA-CLEAN™ will also remove scuff marks that regular household cleaners won't touch.