tamiya (2523)

Great Fun Awaits! The original Grasshopper needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original Grasshopper is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical Grasshopper, with a new body inspired by the famous original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. WR-02CB Chassis  The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save hassle in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while underguard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. Features 1/10 scale R/C model assembly kit. Length: 356mm, width: 244mm. Wheelbase: 170mm. Superb performance both on- and off-road. Durable monocoque centerpiece and inline battery pack position, 4-wheel double wishbone suspension and 2-piece steering tie-rod set up. Polycarbonate body. Sticker design based on the original Grasshopper. Includes headlight cases, allowing installation of separately sold 5mm LEDs. They use separate polycarbonate lens components. Driver figure included. Suspension arms feature multiple damper attachment holes for easily adjustable performance. New 2-piece wheels molded in durable ABS. New tire design, with rib pattern front and block pattern rear. Oil-filled CVA Mini shock units provide superb cushioning, even on rough off-road surfaces. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Includes 540-type brushed motor. Requires 2-channel radio steering servo 7.2-volt battery pack & charger Tamiya PS/TS paint.

A brand new release on the trusty CC-01 chassis: this model recreates the latest version of a famous name in the Tamiya catalogue, the Toyota Hilux. It depicts the 8th generation of the vehicle, released back in 2015, specifically a special full size version of the Extra Cab which Toyota’s British arm had made in the colours of Tamiya’s legendary Bruiser (Items 58048 and 58519) as a tribute to our model. It also appeared in some high profile PR activity Features This is a 1/10 scale R/C model assembly kit. Length: 465mm, width: 200mm. The rugged Hilux Extra Cab form is depicted in lightweight and durable polycarbonate, with separate metal plated side mirror and light case parts. Includes 2 each of white (headlight) and red (taillight) 5mm-diameter LEDs and the LED Light Unit. Please note that the model light cases can be fitted with up to 6 LEDs front and rear. Metal-plated wheels are paired with realistic tyres featuring authentic block tread pattern. Highly reliable CC-01 chassis features a full-time 4WD system and front double wishbone, rear 4-link rigid suspension equipped with 4 CVA oil dampers. This model uses the longer 267mm wheelbase. An expansive range of option parts is available to customize the CC-01 chassis. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Includes 540-type brushed motor. Requires 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS/TS paint.

Real Life Racer This Mini 4WD assembly kit recreates the TS050 Hybrid, a car developed by Toyota Gazoo Racing. A polycarbonate body captures the aerodynamic form with low bonnet, bulging fenders and complex side pontoons, and included stickers help depict livery colors - a choice of number 7 and 8 cars is included in the kit. Dark silver color fin design wheels are paired with black low-profile tires for a racy look, and the model is based upon the MA chassis. The Ultra-Efficient MA Chassis The MA (Midship AERO) Chassis has its motor in the center, and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike. Here, the MA chassis features a 3.5:1 gear ratio. Requires R6/AA/UM3 batteries (x2)

The Audi Quattro A2 is an iconic Rally Race Car that made its mark in the 1980’s. Tamiya’s 1/10 scale radio control replica brings rally racing fun to hobbyists on the adaptable and easy-driving TT-02 chassis. A Giant of the Rally World The Audi quattro is a true rallying legend that was a pioneer of 4WD rally technology. This is an R/C model assembly kit recreating the Audi quattro Rallye A2, the car which debuted in 1983. It features an accurate polycarbonate body recreating the 2-door form, with separate parts for side mirrors, rear wing and light cases. The adaptable TT-02 chassis provides the base, with 5-spoke wheels and tread patterned tires. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. 5-spoke wheels are paired with tread-patterned tires. Features 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm. A2 body is molded accurately in durable polycarbonate. Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. Light cases are compatible with separately sold LEDs; fog lamps are not. 5-spoke wheels are molded in silver, and paired with racing radial tires. The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. 4-bevel differential gears and 4-wheel double wishbone suspension. An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. Includes Tamiya Torque Tuned Motor ESC (electronic speed control) Requires 2-Channel Radio, servo, 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paint.

This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1. Great RR Performance from the M-06 The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. Install separately sold LEDs in the front and rear lights for super realism! Turn signals are separate parts. Separate parts are also employed to depict the distinctive round side mirrors and their slimline stalks. The rear of the model also shows off excellent attention to detail, including a separate bumper part. Dish wheels feature gleaming plated components. Paint the rim sections with TS-26 Pure white to finish. The rear-mounted motor, rear-wheel drive setup provides the model with excellent traction at the rear. Three different wheelbase lengths are accessible by switching the position of rear section parts. Features 1/10 scale R/C model assembly kit. The form of the 23-window Type 2 T1 bus is masterfully recreated in polycarbonate, with separate molded plastic parts included to create bumper, light cases and side mirrors. The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity. This model utilizes the 239mm wheelbase M-06L chassis. Metal-plated dish type wheels Includes 540 motor Requires 2-Channel R/C System ESC Electronic Speed Control R6/AA/UM3 batteries for transmitter Battery pack & charger

This TAMIYA R/C model assembly kit depicts the Citroën 2CV. The kit features a highly realistic recreation of the body, modified for rally races, and based upon a dedicated rally chassis in the form of the M-05Ra. Rally Ready M-05Ra Chassis Based on the front wheel drive M-05 chassis, the rally-tuned M-05Ra chassis features a lightweight, narrow, durable, and an easy-assembly semi-monocoque resin frame. The 4-wheel independent double wishbone suspension is equipped with specially designed hub carriers and F/R uprights to increase ground clearance by 5mm. The front skid guard, side guards, and rally block tires are also included to allow you to enjoy both gravel and tarmac driving. Features 1/10 scale R/C model assembly kit. Wheelbase: 239mm. Polycarbonate body is paired with separate bumper and side mirror parts, plus new depictions of a recovery ladder and attachment bracket. Wheels are paired with rally block tires. Based on the front-wheel drive M-05 chassis, the rally-tuned M-05Ra features specially designed hub carriers and front/rear uprights to increase ground clearance by 5mm. Front skid guard and side guards are also included. The chassis is based around a lightweight, narrow and durable semi-monocoque frame, and is at home both on gravel and asphalt. Includes 540 motor. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit, 23 Turn brushed motor limit) Requires: 2-channel radio, steering servo, 7.2-volt battery pack & charger, and Tamiya PS paint.

This TAMIYA R/C model recreates the Mazda 3, which was first unveiled at the 2018 LA Auto Show. The polycarbonate body faithfully captures the lines of the 2019 Mazda 3 and it sits on top the easy to build and drive TT-02 chassis. TT-02: Adaptable, Balanced Shaft Driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Features 1/10 R/C model assembly kit. Length: 436mm, width: 187mm. Body is molded accurately in lightweight and durable polycarbonate. Features separate parts for side mirrors. A special red version of the TT-02 Lower Deck (Hard) is included, giving the model superb rigidity. Includes Tamiya logo stickers. Twin 5-spoke wheels are gun metal color, and paired with racing radial tires. The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. 4-bevel differential gears and 4-wheel double wishbone suspension. Hop-Up Option parts are available to tune the TT-02 chassis to your needs. Includes 540-type motor. Requires 2-Channel Radio Steering Servo 7.2-7.4volt battery pack Compatible Charger Paint for Body ESC (electronic speed control)

The Classic Tamiya Monster Beetle. The Iconic RC kit. This version takes the classic body, shrinks it to a smaller scale, and mounts it on a variant GF-01 chassis called the GF-01TR! The GF-01TR fits the gear-driven GF-01 chassis with reduction gears (also known as portal axles). This modification allows the hobbyist to better transverse trail terrain as it lifts the bottom of the chassis to better clear obstacles that could high center the vehicle and render it stuck. GF-01TR Chassis This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain. The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty. 4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response. Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a ‘square’ setup with similar tread and wheelbase lengths. Features 1/14 scale RC model assembly kit. Length: 333mm, width: 270mm. Wheelbase: 274mm. Body is molded in red ABS Plastic. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end. Metal-plated parts for headlights, auxiliary lights and engine. The model is based upon the tough, reduction gear-fitted GF-01TR variant chassis. 37.35:1 gear ratio (with the kit-standard 18T pinion gear) gives great drive. The model is also compatible with 20T pinion gears (for a 33.61:1 gear ratio). Yellow wheels are complimented by 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. Includes 540-type motor. Requires 2-Channel Radio Control Unit with receiver NiMH Battery and appropriate charger Batteries for RC transmitter Requires Electronic Speed Controller (ESC)

The Classic Tamiya Monster Beetle. The Iconic RC kit. This version takes the classic body, shrinks it to a smaller scale, and mounts it on a variant GF-01 chassis called the GF-01TR! The GF-01TR fits the gear-driven GF-01 chassis with reduction gears (also known as portal axles). This modification allows the hobbyist to better transverse trail terrain as it lifts the bottom of the chassis to better clear obstacles that could high center the vehicle and render it stuck. GF-01TR Chassis This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain. The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty. 4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response. Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a ‘square’ setup with similar tread and wheelbase lengths. Features 1/14 scale RC model assembly kit. Length: 333mm, width: 270mm. Wheelbase: 274mm. Body is molded in red ABS Plastic. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end. Metal-plated parts for headlights, auxiliary lights and engine. The model is based upon the tough, reduction gear-fitted GF-01TR variant chassis. 37.35:1 gear ratio (with the kit-standard 18T pinion gear) gives great drive. The model is also compatible with 20T pinion gears (for a 33.61:1 gear ratio). Yellow wheels are complimented by 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. Includes 540-type motor. Includes ESC. Requires 2-Channel Radio Control Unit with receiver NiMH Battery and appropriate charger Batteries for RC Transmitter

Revvit, revvit First introduced in 1983, The Frog 2WD racing buggy made a huge splash with its eye-catching design and top-drawer performance, plus a single seater buggy-inspired body that drips realism. The legend continues with the Comical Frog, which features a new stylized body, bubble tires and exciting chassis that offers hours of fun. This R/C model assembly kit creates a 2WD buggy, with a lightweight and durable stylized polycarbonate version of The Frog body, and a helmeted driver figure included. Stickers to create model markings are included, as are masking stickers for use during the paint job. There is plenty to catch the eye in the overall design too, with dual pipe parts giving an antenna motif, and parts depicting megaphone design mufflers. Separately sold LEDs can be installed for a truly awesome model! WR-02CB Chassis  The original FROG needs little introduction. It was a Tamiya legend which inspired legions of fans since the 1980s. For many, it was their very first introduction into the world of radio control assembly kits. The original FROG is still among Tamiya’s best-selling kits to this day. Now the legend is re-imagined as the Comical FROG with a new body inspired by the original. The re-imagined body sits on a new and dedicated variant of the proven off-road chassis: the WR-02CB. Great Fun Awaits! The WR-02CB chassis is an exciting chassis at home on- and off-road, providing smooth driving and the potential for exciting wheelies! It features a pre-assembled gearbox with motor already attached to save time in the assembly process. Long suspension arms and CVA oil dampers make for excellent off-road performance, while under guard and side guards give great protection. A rear wheelie bar helps support the model when it leans back, maintaining a fun wheels-in-the air stance as the model plunges forward. Green and white 2-piece wheels are joined by bubble tires (front: ribbed, rear: round block) for a fun look and drive. Features 1/10 scale R/C model assembly kit. Length: 356mm, Width: 244mm, Height: 195mm, Wheelbase: 170mm Tire Width/Diameter 46/95mm (Front), 56/98mm (Rear) Tread 189mm (Front), 186mm (Rear) Monocoque Frame Chassis 3-Bevel Differential Gear 2-Piece Steering Linkage 4-Wheel Double Wishbone Suspension Front and Rear CVA Oil Dampers Gear Ratio = 18.3:1 Type 540 Motor included Includes: Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Requires 2-channel radio, steering servo, 7.2-volt battery pack with compatible charger, and TAMIYA PS Spray Paint.

This TAMIYA R/C model recreates the ALL-NEW 2019 Toyota Supra. The Supra has not been in production since 2002 and Toyota has brought it back thanks to a collaborative effort with BMW. The chassis, drivetrain, and engine are based on the BMW Z4. The body and suspension tuning were developed by Toyota to give the Supra a distinctive and classic Toyota sporty feel. Tamiya has faithfully recreated the Supra for radio control enthusiasts with a polycarbonate body that captures the sleek lines and it sits on top the easy to build and drive TT-02 chassis. TT-02: Adaptable, Balanced Shaft Driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Features 1/10 R/C model assembly kit. Length: 457mm, width: 188mm. Body is molded accurately in lightweight and durable polycarbonate, with separate light cases front and rear. NOTE: Not LED light compatible. Features separate molded parts for side mirrors. Twin 5-spoke wheels are molded in black, and paired with racing radial tires. The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. Includes 540-type motor. Requires ESC Electronic Speed Controller 2-Channel Radio Steering Servo 7.2-7.4 volt battery pack & compatible charger Paint for Body

Power Hauler Volvo's impressive and varied vehicle line-up is home to a highly successful range of working vehicles that includes haulers for heavyweight work in mines, quarries and the like, among them the A60H that was announced at the bauma 2016 show in Munich. This R/C model assembly kit depicts the A60H with a polycarbonate cab section capturing the hauler's distinctive lines, and a sturdy bed molded in ABS plastic. Stickers are included to recreate details such as front grille, air inlets flanking the hood, headlights, logos and more. Fun, Innovative & Great Performance! The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers, and yellow deep rim wheels are paired with chunky 113mm tires. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable. Features The rear bed is molded in the same yellow as the chassis, perfect for this depiction of a construction vehicle! The lightweight polycarbonate cabin section comes pre-painted in Camel yellow and Gun metal, and cut out, too. A dedicated bumper meshes nicely with the polycarbonate cabin, helping to protect from any major bumps. The G6-01 chassis is based around a slimline monocoque, with a two-piece steering tie-rod for excellent response. 6-wheel double wishbone suspension ensures superior off-road performance in conjunction with 6-wheel drive. The battery pack is inserted longitudinally, and held securely in place by the model's rear bed. Requires 2-Channel R/C Unit with ESC Battery Pack & Charger R6/AA/UM3 batteries for transmitter

A Classy Ride 1955 was the debut of the Volkswagen Karmann Ghia, which combined a Volkswagen chassis with a 2+2coupe body designed by Italian outfit Ghia and manufactured in Germany by Karmann. An air cooled flat-four engine in the back powered the rear wheels, and its fusion of looks, low ride height and affordable price tag made it a popular model that still retains a fan base in the modern day. This radio control model assembly kit depicts the car in 1/10 scale. The elegant lines of the low-slung car are accurately recreated by a polycarbonate body, with separately molded metal-plated light case, bumper and side mirror parts adding extra realism. This specific kit recreates a true classic in the form of the Volkswagen Karmann Ghia. The Karmann Ghia was a stylish coupí© based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann. The polycarbonate body in this replica sits on top of the Tamiya RWD M-06 chassis. Great RR Performance from the M-06 The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. A large bumper is included. Features 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm. Lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases. Includes marking stickers, and window masking stickers for use during the painting process. The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity. This model utilizes the 239mm wheelbase M-06L chassis. Metal-plated wheels paired with front radial and rear super grip radials for superior stability and sharp handling. A host of Hop-Up Option parts are available to customize the chassis to your driving needs. Includes Tamiya 540-motor Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Requires 2-Channel Radio Unit with receiver Steering Servo Battery Pack & Charger R6/AA/UM3 batteries for transmitter Tamiya PS paint

Comical Avante! This R/C model assembly kit creates a 4WD buggy, with a lightweight and durable stylized polycarbonate version of the legendary Avante body. Paint it up in iconic Avante metallic blue, apply the familiar stickers, and voila! A new, Comical Avante! A T-shirted figure is included in the kit for installation at the wheel, as are left and right flags, plus depictions of stylish megaphone muffler ends. The GF-01CB chassis is a gear-driven unit that provides a thrilling drive and super wheelies when you jam on the throttle. The Tamiya series of comical buggies has been a great hit among fans of radio control modeling. It’s a fun and unique chassis combined with bodies re-imagining Tamiya classic names in polycarbonate. Now, the next model is here and not only does it feature a brand-new subject in the shape of the Comical Avante, it also introduces another new chassis variant, the GF-01CB! GF-01: Seriously Stable 4WD This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and WR-02 or GF-01 Hop-Up Option parts are available to hop-up your model. Features 1/10 scale R/C model assembly kit. Stylized polycarbonate comical Avante body and wing. The body is pre-painted in PS-16 Metallic Blue. Driver figure included. Bumper and muffler parts included, with two types of headlight/foglamps. Separately sold LEDs can be used to light up the model front and rear. New ST block bubble tires have stepped block patterns (width/diameter: front 45/99mm, rear 55/99mm). GF-01 variant chassis with tweaked frame components to allow attachment of dedicated parts. Gear-driven 4-wheel drive system. ABS two-part wheels are molded in yellow (rims) and dark gray (spokes). CVA oil dampers ensure superior suspension dampening. A rear wheelie bar lets you perform thrilling wheelies by slamming on the throttle. Note: Bubble front tires from previous comical buggy releases are not compatible with this kit. Includes Tamiya 540-motor. Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Requires 2-Channel radio Steering servo 7.2volt battery pack with compatible charger. NOTE: Must use round type stick battery pack. Square shaped batteries will not fit the battery compartment.

The Hottest Hatch? Suzuki's popular hot hatch underwent a model change in 2017, receiving a revamped body and a 140hp 1.4-liter turbocharged engine driving the front wheels. This R/C model assembly kit depicts that car, with a polycarbonate body to recreate the stylish Swift sport form. A full set of stickers is included to recreate details across the body, and the model is based upon the proven M-05 chassis. The muscular Swift sport body with twin exhausts is molded artfully in lightweight polycarbonate. Polycarbonate light cases are separate parts, and provide a detailed accent at the front. Separately molded side mirrors with integrated turn signals are dedicated parts for this model. Black 5-spoke wheels are a perfect foil for the brightly colored body. Tires have inner sponges. M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. 5-spoke wheels are molded in black and have tires with realistic tread patterns and inner sponge. In this kit, the chassis is setup with the 239mm L wheelbase. A centerline steering servo is at the heart of the 3-piece steering tie-rod for superb response. The kit includes a transponder stay component, which is a must for those who want to race. The rear section can be re-configured for three different wheelbases (this model: 239mm). The Tamiya M-05 chassis is a fun, simple on-road chassis that takes front wheel drive mechanics and puts replica compact cars on top for fun driving thrills. This kit recreates the Suzuki Swift sport. The Swift underwent a full model change in 2017, and impressively managed to improve overall design rigidity while getting lighter. It was given a wider tread, a direct injection 1.4-liter inline-4 engine and 6-speed automatic transmission. The Tamiya assembly kit faithfully captures the body and its details in tough polycarbonate material with the body already pre-painted! Features 1/10 scale R/C model assembly kit. Length: 381mm, width: 167mm. Lightweight, durable polycarbonate body pre-painted in yellow. Wheel arches and the separate polycarbonate light cases come pre-cut. Separate injection molded parts are included to recreate side mirrors. The M-05 chassis is a compact unit based around a lightweight monocoque and offering great weight distribution with a low center of gravity. This model uses the 239mm L wheelbase. Comes with marking stickers to decorate the body. The popular M-05 chassis has a wide range of Hop-Up Option parts available to tune the chassis to any flat surface. Includes Tamiya 540-motor. Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Requires 2-Channerl radio, steering servo, 7.2volt battery pack with compatible charger.

A Glorious Brace This is a 1/10 scale radio control replica of the Toyota GAZOO Racing TS050 Hybrid from the 2019 season. It is a World Endurance Championship race car that competed throughout the WEC 2018-2019 season. This specific kit celebrates Toyota‰ۡó»s second win at the famed 24 Hours of Le Mans. It is only the second automotive company from Japan to ever win the 24 Hours of Le Mans. Compared to the 2018 Hybrid race car, this kit uses updated livery stickers that were used in the 2019 winning car at Le Mans! Comprehensive sticker sheets allow depiction of No.7 and 8 cars from races 2 and 8 of the 2018-19 season. The complex, aerodynamically honed body is realistically depicted in lightweight polycarbonate. Separate polycarbonate parts are used in the recreation of the light cases and canards. Separate polycarbonate parts are also employed for the rear wing and two-piece shark fin. Right: 10-spoke wheels are paired with realistic semi-pneumatic tires for great performance. F103GT - Fun, Responsive Direct Drive! The F103GT chassis utilizes 2WD direct drive, with a rear-mounted motor. Its FRP double-deck frame employs 1.5mm upper and 2.5mm lower decks, cushioned by link-type arm and coil spring left/right independent front suspension. An FRP T-bar is the centerpiece of the rigid rear suspension setup, working in tandem with the friction plate and coil spring unit to provide a smooth drive. The height adjustable gear case allows a range of ground clearance settings, and contains a high-performance ball differential. Front uprights give a 3̴åÁ caster angle, and are equipped with 850 ball bearings. Get ready for a fun, responsive drive! The front employs link-type arm and coil spring left/right independent suspension setup. The rigid rear setup uses an FRP T-bar, plus friction plate and coil spring unit. The adjustable gear case allows setting of ground clearance, and contains a ball diff. Features 1/10 scale R/C model assembly kit. Length: 418mm, width: 188mm, height: 115mm. Wheelbase: 257mm. Includes multi-piece polycarbonate body with separate body, shark fin, canard, light case and wing components. Molded ABS plastic parts are used for side mirrors. Stickers are included to recreate the No.7 and No.8 car liveries for not only the 2019 livery cars but also their 2018 livery counterparts. They also cover parts of the red and black livery sections. The F103GT chassis employs a double-deck FRP frame (lower: 2.5mm, upper: 1.5mm). Utilizes front kingpin coil sprung suspension and a rear rigid type setup with FRP T-bar and friction damper. 10-spoke gun metal color wheels are paired with super slick tires. Includes 540-Size brushed motor. Requires 2-Channel Radio Unit with receiver Steering Servo Battery Pack & Charger R6/AA/UM3 batteries for transmitter Tamiya PS paint

This R/C model assembly kit recreates the GEN2 race car that is used in the Formula E world championship, the pinnacle of electric car racing. The sleek, high-tech body with arch covered wheels is recreated in polycarbonate. Halo, mirrors and rear diffuser/bumper are separately molded components. Markings are included to recreate the Championship Livery car, and the model is based upon the shaft-driven 4WD of the TC-01 chassis. TC-01: Seriously Low-Profile This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil shock-dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient maintenance and pit work. Features 1/10 scale RC assembly kit. Length: 430mm, Width: 188mm, Height: 99mm Wheelbase: 257mm Tire Width/Diameter: 24/64mm (Front & Rear) Composite Monocoque-Frame Chassis Shaft-Driven 4WD Front & Rear Oil-Filled Gear Differentials 3-Piece Steering Tie-Rod Front & Rear Inboard 4-Wheel Independent Double Wishbone Suspension CVA Oil Dampers (Front & Rear) Gear Ratio = 6.56:1 (with kit 24T pinion) Use of different spacers allows alteration of camber, caster and toe angles for maximum freedom of setup. Change bumpers and body mounts to switch between formula and touring car layouts. The shaft-driven 4WD layout uses TB-05 design oil-filled gear differentials for smooth, efficient drive performance. Polycarbonate body Halo and mirror components are molded in white ABS. In addition to the unique Formula E Gen2 body, this chassis is compatible with standard touring car measurement bodies. Wheelbase: 257mm. Stickers are included to recreate the championship car livery. Compatible with IFMAR standard “square-shape” dimension battery packs. Requires 2-channel radio, steering servo, ESC, 7.2-7.4volt battery pack with compatible charge, and Tamiya PS paint for polycarbonate arts and Tamiya TS paint for ABS plastic parts.

This Tamiya R/C kit recreates the classic Audi DTM racing car as raced during the DTM 1991 season. The Audi V8 touring car had a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) racing series in Germany. In that season, it took four victories overall and carried Frank Biela to the drivers’ title. Champion of DTM in 1991 This car graced the German Touring Car Championship (DTM) in 1991, with a 456hp 3.6-liter V8 engine mounted in the front and Audi's famed quattro four-wheel drive. This model depicts the 4-door sedan body in polycarbonate with front and rear spoilers. The Audi with its imposing body overcame significant ballast handicaps and stiff competition from the likes of BMW and Mercedes-Benz to bear driver Frank Biela to four wins and a superb Driver's Championship. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Wheels use slick tires with gold spokes and silver rims. Features 1/10 R/C model assembly kit. Lightweight and durable polycarbonate body. Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Window masking stickers included to aid in the painting process. Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires. 4-bevel differential gears and 4-wheel double wishbone suspension make for smooth driving. Includes 540 Torque-Tuned motor. Requires 2-Channer radio, steering servo, 7.2volt battery pack with compatible charger, and Tamiya PS paint.

Wonder Shot! This assembly kit creates the Comical Hotshot, an exciting off-road buggy inspired by that Tamiya legend the Hotshot. It comes with a stylish polycarbonate body pre-painted in red and with body mount holes already made; depictions of megaphone rear exhausts add a nice touch. The front bumper has space for the installation of four separately-sold LEDs. The GF-01CB chassis employs highly capable gear-driven 4WD and is paired with ST block bubble tires - take it for a spin on- or off-road and you'll have a whale of a time! GF-01: Seriously Stable 4WD This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Sealed gearboxes protect from dust and debris and are integrated into the frame, while the built-in differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension with CVA oil dampers and a two-piece tie rod steering setup with the servo on the left for excellent response. Two-piece wheels are joined by ST block bubble tires, and a range of Hop-Up Option parts are available to hop-up your model. Features The legendary Hotshot body is reinterpreted in polycarbonate, and makes a great pairing with the oversized tires. This image gives a closer look at the front double wishbone suspension, which employs high performance CVA oil dampers. Positioned behind a side guard in the center of the monocoque chassis, the motor powers the model via a gear-driven setup. Wide tread gives superb stability, even when wheelie-ing. Like the front, the rear setup is also double-wishbone with CVA dampers. These exciting two-piece wheels utilize red rims and white spokes to match the body colors. ST bubble block tires give a capable drive. Depictions of big megaphone design exhaust tips add real character to the model, and a wheelie bar helps prevent it tipping during wheelies. Four each of square and round light pods are included, and can have separately sold LEDs installed to give your model a fresh look! Requires 2-Channel R/C Unit with ESC Battery Pack & Charger R6/AA/UM3 batteries for transmitter

Away! This R/C model assembly kit is an updated re-release version of a 1988 buggy from the Tamiya back catalog, which inherited its make-up from the legendary race-oriented Avante. The forward cockpit body design - and the rear wing - are molded in lightweight polycarbonate and pre-painted black, pre-cut with body mount holes pre-made to save on some preparation work. An ABS plastic monocoque frame is employed, with responsive shaft-driven 4WD plus a triple differential setup, four-wheel double wishbone suspension and plenty more - superb off-road driving awaits! Capable Off-Road Chassis This model's durable ABS plastic monocoque frame protects vital R/C equipment and boosts suspension performance with its excellent rigidity. A total of three differentials are employed: small front and rear planetary gear differentials, and a center differential with ball thrust bearing; front and rear gearboxes also have maintenance hatches. Universal shafts front and rear ensure smooth, efficient drive and minimal worry about parts coming loose due to bumps and shocks, while the Avante-based 4-wheel double wishbone suspension employs plastic lower arms with threaded shaft upper arms that allow swift adjustment of camber. Front uprights are aluminum, and stabilizers are included for the front and rear. Features The front double wishbone suspension employs aluminum uprights, while universal drive shafts are used front and rear. This image is a close-up on the three-piece steering tie rod setup. The center plate is crafted in 2mm carbon fiber. Reponsive shaft-driven 4WD is powered by a longitudinally-placed motor, with a ball differential in the drive gear. Sealed gearboxes front and rear house compact planetary gear differentials which utilize the Avante design. The rear suspension setup features long, ball-mounted lower arms. Threaded upper arms (front and rear) allow adjustment of camber. The monocoque bathtub frame is a lightweight, durable design that protects and allows easy access to R/C equipment. Battery changes are made from the underside. The model is compatible with Tamiya 7.2V Racing Pack and LF2200-6.6V battery packs. Lightweight 6-spoke wheels are paired with pin spike tires. Front wheels are narrow, and rear wheels are wide designs. Requires 2-channel R/C system w/ESC R6/AA/UM3 batteries for transmitter Battery pack & charger

The Vanquish is a legendary buggy from our R/C back catalog. It’s now available again in the form of a re-issue assembly kit renamed the VQS. The kit receives tweaks to the original to bring it into the modern age of R/C fun! We have also saved builders some work too, with a pre-cut and pre-painted body! Features 1/10 scale R/C model assembly kit. Lightweight and durable polycarbonate, pre-painted and cut, with body mount holes already pre-drilled. Body stickers are based upon those in the original release, and just require application to complete the body. Bathtub chassis. New Parts: Aluminum front uprights and efficient universal shafts are designs inherited from the 2011 re-issue of the Avante (Item 58489). Planetary gear differential units from the original Avante. Includes 540-Size brushed motor. Requires 2-channel radio Steering servo 7.2volt battery pack with compatible charger

This R/C model assembly kit recreates the 2020 Ford GT Mk II track-only supercar. The MK II was built to celebrate Fords race winning heritage at Le Mans which was accomplished with the legendary GT40 MKII back in 1966. This version of the Ford GT will be limited to 45 hand-built machines, but the Tamiya R/C version is available for all fans! The accurately depicted Ford GT MK II body is made of polycarbonate and ABS plastic wing and mirror pieces, which sits on top of our most builder user friendly TT-02 entry-level on-road chassis. Mesmerizing Modern Classic Announced in 2019, the GT Mk II is based upon the Ford GT, and the performance has been thoroughly tuned without limitations related to race and public road regulations. A 3.5-liter V6 twin turbo engine capable of 700hp is employed, and the body was refined for aerodynamic efficiency. Only 45 of the full size car are to be produced, but Tamiya is on hand with this R/C model assembly kit depicting the car. The body is molded in polycarbonate, and the kit comes with stickers to apply the black, blue and gold sections of the livery, as well as various logos. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels use tread patterned semi-pneumatic tires. Features 1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 112mm. Wheelbase: 257mm. The ultra-honed form of the car is recreated in lightweight polycarbonate, with separate parts used to depict flying buttresses, rear wing and side mirrors. Body is made of polycarbonate with ABS plastic wing and mirror parts. Stickers are included to decorate the body as the car appeared in its unveiling. Twin five-spoke wheels with slick tires. The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub. 4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance. A wide range of Hop-Up Option parts is available to customize your chassis. Includes 540-brushed type motor. Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Requires 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS paint.

The Landfreeder Quadtrack is a fresh new twist on the fun world of Tamiya R/C. This kit uses a new variant of the TT-02 chassis with three-sided track units in place of the wheels: the result is awesome traction that can be used to take on rough terrain. Furthermore, the polycarbonate truck body comes already pre-painted in Tamiya PS-5 black. Features 1/10 scale R/C model assembly kit. Length: 425, width: 247mm. The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) and with Smoke (PS-31) painted windows. Separate plated parts recreate grille cover, fog lamps and roll bar. The TT-02FT is a variant of the TT-02 chassis, with four tracks on its suspension. Each of the three-sided track units is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from link parts, and offer efficient traction. Two types of elastomer track link (standard and grouser) are included for setup options. Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance. Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered during off-road driving. TT-02 four-bevel differentials and identical suspension arms are used. Includes 540-brushed type motor. Requires ESC (Electronic Speed Control) 2-channel radio Steering servo, 7.2-7.4volt battery pack and compatible charger.