tamiya (2523)

The Nissan GT-R, fielded by the UK-based Sumo Power to compete in the 2010 FIA GT1 World Championship, now comes on the fun-to-drive TT-01 Type-E Chassis. Features 1/10 scale R/C assembly kit. Polycarbonate body of the Nissan GT-R included. Side mirrors and rear wing are reproduced with separately molded parts. Separately molded light cases included (separately available LEDs can be installed). Sticker sheet and masking seals included. Narrow slick tires (26mm width) and silver narrow 6-spoke wheels (offset +2) included. TT-01 Type-E chassis features 4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes. Type 540 motor included. Tamiya TEU-104BK ESC included

Race-Spec Scirocco 　 This is a 1/10 scale R/C assembly kit of the Volkswagen Scirocco GT24-CNG, which demonstrated its superb performance, capturing the AT (alternative powertrain) class title at the 2011 24 Hours Nurburgring. The sporty form of the race-spec Scirocco has been realistically reproduced by the polycarbonate body with rear wing and side mirrors depicted with separate parts for enhanced realism. The car numbers and sponsor logos can be depicted with included stickers. Well-Balanced FF-03 Chassis 　 The longitudinally-mounted battery allows for a slim chassis design, with the R/C units loaded on either side for optimum balance. In addition, the front-mounted, compact gearbox is equipped with a ball differential and provides ample traction. The 4-wheel double wishbone suspension features CVA oil dampers while an Inboard Front Suspension set-up with short reversible suspension arms enables well balanced settings. Furthermore, the rocker bridge is equipped with stabilizer holders and 24mm width racing slick tires are mounted on 10-spoke gun metal wheels. Take control of the FF-03 chassis and enjoy a refreshing R/C driving experience. Requires 2-channel R/C unit with ESC Battery pack and charger R6/AA/UM3 batteries for transmitter

Built for the Track This is a 1/10 scale R/C assembly kit of the Ferrari 599XX, an extreme circuit-only machine incorporating a number of technologies taken from Ferrari's racing experience. The stylish long-nose, short-deck form of the 599XX including the rear diffuser has been accurately reproduced by the polycarbonate body. The C-pillar winglets, rear wing, canards as well as light cases are also reproduced with polycarbonate parts. This exceptional machine is mounted on the TA06 chassis which features front belt-driven, rear gear-driven Dual Drive 4WD system. Dual-Drive 4WD System The 4WD TA06 chassis features an excellent balance and its layout positions the motor and battery pack along the centerline of the chassis. It is powered via a distinctive Dual-Drive System with belt-driven front and gear-driven rear wheels. 4-wheel double wishbone suspension features a refined Inboard Front Suspension setup with short reversible suspension arms. The front and rear gearboxes are both equipped with gear differential units to provide superb traction and acceleration. Requires 2-Channel R/C Units with ESC Battery Pack & Charger R6/AA/UM3 batteries for transmitter Type 540 motor

The Ferrari 599XX is an extreme circuit-only automobile which features exceptional performance with an aggressive and aerodynamic body. Tamiya's R/C replica is reproduced as a 1/10 scale R/C model on the fun-to-drive entry level assembly kit, TT-01 Type-E chassis. Features 1/10 scale R/C assembly kit. Kit includes FREE BONUS PARTS (Matte-Plated Medium-Narrow Mesh Wheels x 4pcs.) The Ferrari 599XX body, including C-pillar winglets, is made out of polycarbonate material. Sticker and masking sticker sheets included. Separately-molded resin side mirrors as well as polycarbonate rear wing and light cases included. The TT-01 Type-E chassis features shaft-driven 4WD system drive-train, full independent suspension with oil filled dampers and gear differentials. Includes Tamiya TEU-104BK ESC Includes 540-J brushed motor. LED component lights are not included, but are available separately. Requires 2-channel radio gear (Transmitter, receiver and Electronic Speed Controller) 7.2V Nimh battery and compatible charger Polycarbonate paint for the unpainted body shell Basic tools for construction

Corr, What a Car! The Championship Off-Road Racing (CORR) circuit was a series featuring rough and tumble races played out by souped up pick-up trucks and thrilling multitudes of fans. The 2006 season had a full calendar of 16 races, and the Nissan Titan race truck took part in the RWD Pro 2 class - this is an R/C model assembly kit depicting the car, with the extensively-modified body of the Titan recreated gloriously in lightweight and durable polycarbonate. The kit also comes with marking stickers. This is an easy to build Nissan Titan truck kit. The body is mounted on the Tamiya DT-02 platform buggy chassis, which makes it ideal for any new hobbyist building a construction kit for the first time. The Nissan Titan body replicates the truck as it was raced in the 2006 Championship Off-Road Racing (CORR) season in the United States. Rear-Wheel Drive DT-02 Paired with Dual Block Tires The DT-02 chassis bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with CVA oil damper units to provide superb off-road traction. A sealed gearbox protects against dust and debris and is equipped with differential gears to ensure smooth cornering. Star-dish wheels are paired with dual block K tires front and rear to ensure that the model offers a dynamic drive. Features Polycarbonate body 2WD with full independent suspension Oil filled dampers Newly-designed damper stays enable installation of long oil dampers to provide plenty of suspension travel Fully-enclosed gearbox protects against dirt and debris Front and rear Dual Block Tires Type 540 motor included Tamiya TEU-104BK ESC included Contents 1/12 scale Tamiya Nissan Titan Truck with Body Wheels Tires ESC 540 Motor Servo Saver Decals Product Manual Requires 2-Channel R/C Unit with ESC Battery Pack & Charger R6/AA/UM3 batteries for transmitter

FEATURES: Chassis: WR-02 plastic monocoque type with wheelie bar Drive: Rear wheel Motor: 540 size brushed, with 18T pinion gear ESC: Tamiya TEU-104BK with reverse, TAMM4541 Differential: Bevel gear Suspension: Four wheel double wishbone Front Bumper: Plastic with two coil springs to absorb minor impacts Body: Clear polycarbonate with injection molded driver figure Gearbox: Preassembled and sealed Shocks: Plastic body, friction (not oil-filled) Tires: Off-road V-pattern 2.7" (68mm) wide, 2.04" (52mm) diameter Wheels: White plastic 2.3" (57.5mm) wide, 2.04" (52mm) diameter Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable INCLUDES: Tamiya Volkswagen Type 2 (T1) Off-Road Van, Clear Body, Driver Figure Tires, Wheels, 540 size Motor, ESC, Decals and Instruction Manual REQUIRES: Radio: 2-channel with high-torque steering servo AA Batteries: 4 or 8 depending on transmitter Battery: 6-cell stick with standard connector Battery Charger: For selected battery pack Paint: Polycarbonate safe spray or brush-on Building and track equipment SPECS: Vehicle; Finished specs not provided by manufacturer Body; Length: 11.7" (298mm) Width: 5.5" (139mm) Height: 5.1" (130mm)

Stylish Pick-Up 　 This electric powered R/C assembly kit features a stylish pick-up truck body mounted on a rear-wheel drive 2WD chassis. The monocoque chassis frame is made from durable polycarbonate-reinforced material and the R/C units, battery pack, and motor positioned for optimum weight distribution. Its 4-wheel double wishbone suspension is equipped with 130mm diameter tires with lug-pattern treads to ensure superb off-road traction. A durable polycarbonate body can be flamboyantly finished with the included marking stickers. Well-Balanced 2WD Chassis 　 The monocoque main frame is made from durable polycarbonate-reinforced material. Battery pack, motor, and steering servo are positioned along the centerline of the chassis for optimum balance. 4-wheel double wishbone suspension features upper I- and lower H-arms and comes equipped with 130mm diameter tires with lug-pattern treads. Furthermore, the pre-assembled gearbox can be conveniently detached for maintenance without disassembling the chassis. Requires 2-Channel R/C Unit with ESC Batteries for transmitter Battery Pack & Charger

Take On Tough Road This electric R/C assembly kit reproduces the 4WD Toyota Hilux Pick-Up (RN36), which enjoyed wide popularity in the US and Japan during the 1980s and is still adored by many fans today. The model features a ladder frame like the actual vehicle, Type 540 motor, 3-speed transmission, and an abundance of metal parts for a high level of realism.Its live axle suspension features metal axle housings, leaf springs, and oil dampers while a metal front under guard helps the model take on tough off-road conditions. A highly detailed injection-molded body and large 123mm diameter tires also gives the model a stylish, high-lift appearance. The 3rd generation Toyota Hilux Pick-up (30/40 Series) debuted in 1978 and the RN36 model was developed specifically for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located towards the rear to provide sufficient approach/departure angles for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance. The RN36 model was mainly exported to North America but was also later sold in Japan, and there are still many fans of this pick-up to this day. Features Equipped with metal front under guard. Knuckle mechanism is just like that on an actual truck. Highly-durable front rear die-cast metal wheel hubs. A planetary gear ensures optimum ratios while a metal dog clutch, shift forks, and plastic gears combine to deliver smooth gear changes. Durable, lightweight die-cast aluminum front/rear axle housings are equipped with differentials. Power is delivered from the transmission to the front wheels via universal drive shaft. An abundance of metal parts are incorporated for a high level of realism. Requires Transmitter ESC NiMH battery Suitable Charger Poly-carbonate Spray for body shell 2x servos for steering and transmission

【 Low Center of Gravity M-05 Chassis 】　The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　an easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provides stable high-speed cornering. In addition, M-Chassis radial tires are mounted on 8-spoke wheels to enhance realism. 【 Specifications 】　●Length: 375mm, Width: 170mm, Height: 128mm ●Wheelbase: 239mm　●Front Motor, Front-Wheel Drive ●3-Bevel Differential Gear ●3-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio=5.8 :1 ●Tire Width/Diameter (Front & Rear): 25/59mm ●Requires Electronic Speed Controller (separately available)

Devilish Fun 　 This electric R/C assembly kit combines a pick-up truck body with large diameter wheels to offer dynamic R/C off-road driving. The WT-01 chassis features a highly durable monocoque main frame made from polycarbonate-reinforced material and is matched with a 4-wheel double wishbone suspension. Stickers are included to depict the stylish blue rim on the metal-plated wheels to enhance the custom appearance. The 130mm diameter tires with lug-pattern tread will let you romp over all sort of terrain. The lightweight, durable polycarbonate body comes with parts for a roll bar and a grille guard with five auxiliary lights as well as stickers for the flamboyant livery. Well-Balanced 2WD Chassis 　 The monocoque main frame is made from durable polycarbonate-reinforced material. Battery pack, motor, and steering servo are positioned along the centerline of the chassis for optimum balance. 4-wheel double wishbone suspension features upper I- and lower H-arms and comes equipped with 130mm diameter tires with lug-pattern treads. Furthermore, the pre-assembled gearbox is equipped with a differential for smooth cornering and can be conveniently detached for maintenance without disassembling the chassis. Requires 2-channel R/C system with ESC Battery pack and charger Batteries for transmitter

Bring the Thunder 　 This is a re-release version of the Stadium Thunder R/C pick-up truck assembly kit, which was inspired by the popular stadium racing truck designs seen in the United States. The polycarbonate body realistically captures the ground-hugging form of the truck and its livery can be easily depicted with the included stickers. The model also features fluorescent yellow wheels to provide an eye-catching accent. Tough RWD Off-Road Chassis 　 The lightweight ABS bathtub chassis is easy to assemble and features a rear-mounted motor, rear-wheel drive layout. Power is delivered via a fully-enclosed gearbox which is equipped with a differential. The 4-wheel independent double wishbone suspension is equipped with C.V.A. shock units and extremely durable monocoque lower arms. Large diameter tires provide dynamic off-road handling. The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high grip. Requires 2-channel R/C unit with ESC Battery Pack & Charger Batteries for transmitter

This is a re-released version of Item 58050, the classic Tamiya 2WD R/C buggy which was originally released in 1985. A roll cage and headlights help give this buggy a scale-realistic presence. The body and roof are made from durable, lightweight polycarbonate and a driver figure is included to liven up the cockpit. Ribbed front tires provide directional control and rear tires feature a block tread pattern for high grip, allowing you to enjoy dynamic off-road action. Durable lightweight ABS frame is matched with a battery case which is compatible with modern power sources such as Tamiya Racing Packs and LF batteries. 4-wheel independent suspension is equipped with aluminium oil dampers and trailing arms and a wide tread ensures excellent off-road stability. Enclosed gearbox protects against dirt and debris and is equipped with a differential for smooth cornering. In addition, driveshafts feature dog bone- type joints and dust covers to ensure superb protection. Requires Electronic Speed Control/ESC (2-3S) Servo 2-Channel Radio 7.2V Battery and Compatiable Charger Paint eg Tamiya PS paints

The first model to feature the newly-designed XV-01 chassis is the Subaru Impreza WRX STi rally car which was fielded in 2011 by the Subaru Team Arai. Led by Toshihiro Arai, the championship-winning driver of the 2005 and 2007 Production Car World Rally Championship (PWRC) seasons, the team entered the Impreza in the 2011 Intercontinental Rally Challenge (IRC) series. The team also raced at Rd.5 Rally Hokkaido in the 2011 Asia-Pacific Rally Championship (APRC), where Arai impressively drove the car to victory. The Tamiya R/C assembly kit precisely replicates the Subaru Impreza in every detail for Rally R/C enthusiasts looking for the next level in a performance and realism. The 4WD XV-01 chassis offers dynamic R/C rally driving on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with front and rear enclosed gearboxes equipped with gear differential units. The box-like main frame incorporates covers and wheel well liners to provide superb protection against dirt and debris. The 4-wheel double wishbone suspension ensures plenty of suspension stroke and ground clearance and is matched with Rally Block Tires on replica wheels for realistic handling. Requires 2ch Radio sys. 7.2 battery & charger Battery Pack PS Spray 8 x AA batteries Tools

Bring Back the Sport Released in April 2012, the Toyota 86 is a lightweight, front engine rear-wheel drive sports car and this highly-anticipated sports car comes available as a 1/10 scale R/C model on the TA06 chassis. The sporty form of the car and its distinctive features, including a low-profile bonnet, flared fenders, and rear diffuser, have been realistically reproduced by the polycarbonate body. Separately-molded polycarbonate light cases and stickers to depict car emblems enhance the model's presence. Dual-Drive 4WD System　 The 4WD TA06 chassis features an excellent balance and its layout positions the motor and battery pack along the centerline of the chassis. It is powered via a distinctive Dual-Drive System with belt-driven front and gear-driven rear wheels. 4-wheel double wishbone suspension features a refined Inboard Front Suspension setup with short reversible suspension arms. The front and rear gearboxes are both equipped with gear differential units to provide superb traction and acceleration. 24mm width racing radial tires with inner sponges are mounted on mesh wheels. Requires 2ch Radio sys. Charger Battery Pack PS Spray 8 x AA batteries Motor

The Volkswagen Golf24 race car was entered in the 2011 24 Hours Nurburgring to commemorate the 35th anniversary of the Golf GTI. This car featured race-spec modifications including a front-mounted 440hp inline 5-cylinder turbocharged engine, 4WD powertrain, and a dynamic form with fender flares and a rear wing. Three of them were entered and they drew much attention during the race. The iconic German hatchback is fitted to Tamiya s proven and easy to assemble TT-01 Type-E chassis which is ideal for hobbyists who enjoy building on-road touring car kits.   Specs and Features Scale: 1/10 scale Construction type: assembly kit Terrain use: on-road Drive-train: 4WD Drive type: gearbox Drive line: dog bone Differential type: gear Suspension: fully independent double wishbone Steering mechanism: bell-crank Shock damper: friction damper Shock damper material: plastic Tire type: rubber Tire tread: slick Body material: Clear Polycarbonate ESC: included ESC type: TEU-105BK LED Light buckets: yes LED lights: no Motor type: 540-brushed type Bearings: plastic bushing Chassis material: plastic Sticker material: vinyl Internal gear ratio: 8.35 with included 19T pinion Adjustable camber: fixed Adjustable toe angles: front only Adjustable ride height: yes Adjustable gear ratio: yes Adjustable wheelbase: yes Adjustable track width: fixed Adjustable shock angle: yes Special features: Window painting masks and injection molded side mirrors Requires: 7.2 battery & charger  radio gear servo receiver  polycarbonate paint

The new F104 version II chassis incorporates a Pivot Ball Link Rear Suspension (PBLR) like the one found on the RM-01 chassis. Compared to the previous 3-point T-bar rear suspension system, this new setup enables more precise adjustments of the chassis' pitch and roll characteristics. Furthermore, the PBLR suspension system features a center pivot ball, an aluminum pitch damper to temper chassis pitch movement, and an aluminum roll damper and side links to control chassis roll. The new layout also increases overall traction and provides greater high speed cornering ability. The proven F104 front suspension remain intact, which features king pin coil springs for the suspension set up.   The following Hop-Up Options are included in the kit:  •3mm Carbon Fiber Lower Deck •3mm Carbon fiber lower brace •3mm Carbon Fiber body-mount plate •2mm Carbon Fiber Upper Deck (front/rear) •3x35 Aluminum Turnbuckle Shafts (blue) x2 •New Aluminum Diff housing (uses TRF417 diff rings) •Item 54342 RM-01 Aluminum Roll Damper set •Item 54341 RM-01 Aluminum Pitch Damper set •Item 54240 F104 Clamp Type Wheel hub •Item 54209 5x5mm Aluminum Hex Head Ball Connector (fluorine coated) •Item 54202 F104 Aluminum Upper Suspension Mount •Item 54161 F104 Low Friction Suspension Ball Set •Item 54159 Aluminum Horn for Hi-torque servo saver (F104) •Item 53900 04 Module Spur Gear Set (93T/104T) •Item 53601 Low Friction 5mm Adjuster (8pcs.) •Item 53599 Fluorine Coated 5mm Aluminum Ball Connector (10pcs.) •Item 51000 Hi-Torque Servo Saver (black) •Item 50509 F1 Front Spring Set Specs and Features:  •Scale: 1/10 scale •Construction type: assembly kit •Terrain use: on-road •Drive-train: 2WD •Drive type: pinion to spur gear •Drive line: solid axle •Differential type: ball pressure plate •Suspension: PBLR (Pivot Ball Link Rear Suspension) •Steering mechanism: direct servo •Shock damper: oil-filled damper •Shock damper material: aluminum •Tire type: not inluded •Tire tread: n/a •Body material: n/a •ESC: not included •ESC type: n/a •LED Light buckets: no •LED lights: no •Motor type: not included •Bearings: shielded ball bearing •Chassis material: carbon fiber plate •Sticker material: n/a  •Adjustable camber: front only •Adjustable toe angles: front only •Adjustable ride height: yes •Adjustable gear ratio: yes •Adjustable wheelbase: yes •Adjustable track width: fixed •Adjustable shock angle: yes •Anti-squat adjustment: n/a •Droop adjustment: n/a •Special features: 3.0 mm carbon chassis •Requires: 7.2 battery, charger •Requires: polycarbonate paint •Requires: radio gear, servo, receiver •Requires: wheels, tires, body set, motor, esc

large diameter tires, and a twin-motor drivetrain for exciting monster truck action. The injection-molded body is detailed with metal-plated parts for the front grille and bumper, fuel tanks, exhaust pipes, air cleaners, and roll bar reproduced to provide a customized look. Massive 165mm diameter, 110mm width tires are mounted on metal-plated wheels. Suspension arms are also reproduced as metal-plated parts. A sticker sheet to recreate the flamboyant flare-pattern graphics is included. Requires 2-channel R/C unit with ESC, battery pack and charger.

This 1/10 scale R/C model features a realistic pick-up truck body and large tires. The shaft-driven full-time 4WD chassis is equipped with double wishbone suspension, allowing you to enjoy exciting cross-country, off-road, and on-road R/C action.

This is a 1/10 scale assembly R/C kit of the Subaru BRZ, which was released to the driving public in March 2012. The BRZ is a compact, front engine rear-wheel drive sports car powered by one of Subaru s trademark boxer engines, a 2.0-liter 4-cylinder unit. Its lightweight, rigid chassis was designed to give the driver an exciting driving experience and features a low center of gravity as well as a specially-tuned front strut, rear double wishbone suspension setup. The Tamiya Radio Control replica is mated to the easy to assemble TT-01 Type-E chassis platform, which is ideal for new hobbyists entering the radio control modeling hobby. Specs and Features:  Scale: 1/10 scale  Construction type: assembly kit  Terrain use: on-road  Drive-train: 4WD  Drive type: shaft  Drive line: dog bone  Differential type: gear  Suspension: fully independent double wishbone  Steering mechanism: bell-crank  Shock damper: oil-filled damper  Shock damper material: plastic  Tire type: rubber  Tire tread: radial  Body material: Clear Polycarbonate  ESC: included  ESC type: TEU-105BK  LED Light buckets: no  LED lights: no  Motor type: 540-brushed type  Bearings: plastic bushing  Chassis material: plastic  Sticker material: vinyl  Adjustable camber: fixed  Adjustable toe angles: front only  Adjustable ride height: yes  Adjustable gear ratio: yes  Adjustable wheelbase: yes  Adjustable track width: fixed  Adjustable shock angle: yes - Special features: - Requires: 7.2 battery & charger - Requires: radio gear, servo, receiver - Requires: polycarbonate paint

The Toyota 86 has been a highly anticipated sports car since the 2009 Tokyo Motor Show. In 2012 the vehicle was finally released to markets around the world. In Japan it is known as the Toyota 86. In Europe it is known as the GT-86 and in the USA and North America it is known as the Scion FR-S. The new Toyota 86 R/C body is mounted on Tamiya's proven entry level assembly kit, the TT-01E. Features: 1/10 scale R/C assembly kit The Toyota 86 body is made of Polycarbonate material Sticker and masking sticker sheets included Separately-molded resin side mirrors as well as polycarbonate The TT-01 Type-E chassis features shaft-driven 4WD system drive-train, full independent suspension with oil filled dampers and gear differentials Includes Tamiya TEU-105BK ESC Includes 540-J brushed motor LED component lights are not included, but are available separately Specifications: Length: 431mm Width: 190mm Height: 132mm Wheelbase: 257mm Gear Ratio: 8.35:1 Includes: Tamiya 1:10 TT-01E Toyota 86 FR-S with ESC EP 540-J brushed Motor Tamiya TEU-105BK ESC Wheel (4pcs) Tires (4pcs) Body (1pc) Front and Rear Light Bucket (1set) Decals Instruction Needed to complete: Battery Radio Servo Charger

Enjoy driving in the dirt! This is a 1/10 scale R/C assembly kit of a racing truck, the mainstay of US off-road racing. The name 'Asterion' derives from a heavenly dog, who is led by the hunter Bootes in a constellation in the northern sky. The short-bumpered form gives the model a racy feeling, and the metallic stickers add embellishment to the black body. The chrome-plated wheels and off-road tires add to the splendid experience of driving this high-performance truck. XV-01T Chassis The XV-01 chassis offers exciting R/C driving action on both on-road and dirt track surfaces. It features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard to ensure unhindered off-road performance. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Gear differential units enable customization with different viscosities of differential oils. Requires 2-channel R/C system with ESC　 7.2volt Battery Pack & Charger

Its simple 2WD chassis features a straightforward, rugged design to ensure easy assembly and superb reliability while its 4-wheel double wishbone suspension offers agile handling. Combining exciting performance with user-friendliness, the Fighter Buggy SV is the perfect way for R/C novices to start enjoying the wonderful hobby of Radio Control. Requires 2-Channel R/C unit with ESC, paint for completion, battery, and charger.