tamiya (2523)

About the Tractor Truck Multi-Function Control Unit Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access. An ESC has been built in to the unit, enabling realistic running at very low speeds. A 4-channel R/C system activates all functions By using your transmitter sticks and the trims you can control the truck movements (forward/backward running and turns), horn, motorized support legs (Item #56505) (sold separately), headlights, position lamps, roof lamps and speed indicators. You can also activate the back lamp, tail lamps and blinkers/hazard lamps as well as engine revving.

This Multi-Function Control Unit brings your 1/14 scale R/C tractor to life, with its recreation of highly realistic sounds, lights and vibration, all of which are coordinated by the MFC-03 unit. Engine sounds were digitally recorded from a real L6 diesel engine, currently the most common unit in European trucks: they cover a number of typical truck sounds from engine start-up to idling and a range of sounds to match model speed, replicating rev sounds with excellent quality. Air sounds are also synchronized with truck operation, as are turn signal, horn, coupler connection/separation, brake sound effects and more! A vibration unit provides incredibly realistic shaking. The MFC-03 also acts as a speed controller that enables smooth running at not only high, but also extremely low speeds and when towing separately sold semi-trailers. Requires Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505). Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility. Lights 　 Headlights Fog lamp Main beam Brake lights Reverse lights Winkers Hazard lights Auxiliary lights Roof lamps Speed indicators Low voltage warning Demo mode 1: manual illumination Demo mode 2: slow flashing Demo mode 3: slow illumination Demo mode 4: quick illumination Sounds Ignition Alarm 1 (pre-heating) Pre-heating Engine start (successful) Engine start (failed) Idling Engine sound 1 (towing trailer) Engine sound 2 (without trailer) Engine sound 3 (revving) Engine stop Up-shifting Down-shifting Horn A (low) Horn B (high) Coupler attachment Coupler detachment Brakes Winkers 1 Winkers 2 Hazard lamps 1 Hazard lamps 2 Reverse alarm Alarm 2 (lights on, engine stopped) Alarm 3 (low electric field intensity) Alarm 4 (speaker check) Air discharging 1 (after engine start) Air discharging 2 (after parking brake is engaged) Air discharging 3 (after returning to neutral) Air discharging 4 (when idling) Air discharging 5 (every 10 secs. while running) Air discharging 6 (after braking) Air discharging 7 (after engine stop) Air discharging 8 (manual) Transmitter Functions 　 Steering Winkers Throttle Main beam Horn Clutch Engine start Semi-trailer detachment Support leg lowering Support leg raising Winker mode preparation Winker cancellation Gear shifting Shift change sounds Lights Winker/Hazard switching Horn sound switching Horn/Support leg switching Simulated engine stop Winker sound switching Definition of gear positions Modes 　 Multi Mode (driving, sounds, lights and vibration - the full package!) R/C Mode (limited to driving only) Demo Mode (display mode; no driving) Vibration Equipment 　 Vibration unit Vibration unit adjuster

This actuator set is designed to complement the Mercedes-Benz Arocs 3348 Dump Truck. When using a 4-channel transmitter, the dump feature of the trucks bed can be fully controlled.

On the Move This is a 1/25 R/C model assembly kit which depicts the Centurion Mk.III, a tank used by numerous militaries and forces across the world, in addition to the British Army. An assembly-type twin gearbox is installed in the hull rear. Its dual Type 130 motors are controlled via the MC-07 control unit, allowing a range of speeds and turning circles, even pivots. Realistic motion is enhanced by movable Horstmann suspension featuring metal coil springs, while tracks come pre-assembled. No less than four marking options are included in the kit. Serving with Distinction Developed to meet the ever-improving threat of German armor, the Centurion evolved into the British main battle tank in the post-WWII era. The Mk.III was perhaps the most polished Centurion variant, upgunned with the powerful 20 pounder gun; it was deployed in the Korean War, and was regarded by many as the lynchpin of the Allied forces on the peninsula. Some 2,800 Mk.III Centurions were produced between 1948 and 1956. Deployed not just by Britain but also by clients such as India, Israel and Egypt, they were a formidable force in whatever military's colors they were used. Requires 4x alkaline R6/AA/UM3 batteries for control unit/model 1x 6F22/006P (9V) battery for transmitter

An all-inclusive assembly kit that will take your 1/25 Tamiya Panther Ausf A and turn it into a radio controlled tank! This kit will come with the parts to build the tank itself and all the electronics (except batteries) to get your tank moving around. Includes Includes Transmitter and Receiver unit Forward/reverse running with turns and realistic manoeuvrability. Movable torsion bar suspension Pre-assembled Tracks 4 Marking Options included Turret rotation parts included Requires 4x AA batteries for control unit 4x AAA batteries for transmitter

This radio control model replicates delivery trikes widely seen making deliveries in Japan. When the model turns, the 3-wheel chassis "leans" into the corner much like their full-size counterparts. The 3-wheel chassis features the motor in the rear section, with the battery in the front. The two sections are linked in the middle, and a steering servo leans the entire front section left and right to effect turns. Furthermore, support arms are linked to the steering servo, and help to right the model if it happens to tip over.

This radio control model is the second on the Tamiya T3-01 chassis series. The body in this kit replicates a sleek, futuristic styling form. Furthermore, the included brand-new rider figure is highly detailed, which makes driving the T3-01 chassis more dynamic. When the model turns, the 3-wheel chassis "leans" into the corner much like their full-size counterparts. Furthermore, the 3-wheel chassis features the motor in the rear section, with the battery in the front. The two sections are linked in the middle, and a steering servo leans the entire front section left and right to effect turns. Furthermore, support arms are linked to the steering servo, and help to right the model if it happens to tip over. FEATURES 1/8 scale R/C model assembly kit. Length: 260mm, width: 135mm, height: 185mm.Wheelbase: 196mm. Brand new 1-piece polycarbonate body features a sleek, blade-like design. Features a brand-new driver figure and parts depicting handlebar (and steering wheel). The figure has movable hands (which fit to the bar or steering wheel) and a choice of headgear. The T3-01 chassis is comprised of front (with R/C equipment and power source) and rear sections. The servo action tilts the front, causing the model to lean into turns. A planetary gear is integrated into the rear axle for smooth power. Features telescopic front fork suspension and a rear cam-slide setup, for a smooth ride. Support arms move with the steering servo, and help the model right itself if it overturns. Type 370-size motor included. Note: Battery pack size must be under 66x36x15mm and be square shaped to fit this model. Separately sold Item 51610 T3-01 Battery Case allows use of 4 AA batteries to power the chassis. Requires: 2-Channel radio, servo, ESC, battery & compatible charger, and Tamiya PS/TS paint.  

Small yet perfectly formed The Lunch Box is a famous name in Tamiya R/C and Mini 4WD, delighting many a hobbyist over the years. Now, it is here in brand new mini 1/24 form, as a fascinating R/C model assembly kit! While extremely compact, it is endowed with excellent mechanical design: gear driven 4WD, strut suspension and more! The lightweight polycarbonate body comes pre-painted in yellow, with wheel arches pre-cut and body mount holes already made. Stickers are included to decorate the body. SW-01: Super-Compact 4WD 190mm long and 150mm wide, the SW-01 is a compact, highly fun 4WD chassis. A Type 370 motor is central in the slim monocoque frame, with gears transmitting its output to the front and rear of the model, where 70mm tires translate it into a powerful drive. The chassis power source is mounted in the top section to allow wild wheelies under acceleration. Strut type 4-wheel independent coil sprung suspension utilizes single piece upper arms to link left and right wheel steering motion, helping suppress roll during turns, and together with front and rear differentials realize a tight turning circle. This is a compact, maneuverable, and above all super-fun addition to the world of Tamiya wheelie models! It's a familiar face, too, as the legendary Tamiya Lunch Box has been shrunk down to 1/24 scale. The classic shrunken Lunch Box body sits on top of the 4WD SW-01 chassis. It is capable of 4-wheel steering using separately sold Upper Arm Connectors that not only allows you to steer with all four wheels on the ground, but it also allows the vehicle to steer while doing wheelies! SWD-01 chassis key Features The steering uses 1-piece upper arms for a tight turning circle and the body leans to help suppress tumbles. It can be converted into a 4-wheel steering setup with separately sold Item 54898 SW-01 Upper Arm Connectors. The body is attached to the body mounts using magnets for quick attachment. The Type 370 motor is located right in the center of the SW-01 chassis, in a gear-driven 4WD setup with a gear ratio of 21.875:1. 1/24 scale R/C model assembly kit. Length: 190mm, width: 146mm, height: 140mm. The famous Lunch Box body is molded in lightweight and durable polycarbonate and is pre-painted. The body leans in the direction in which the model steers, achieving remarkably tight turning circles. Responsive 4WD. Strut style suspension. Can be used with standard size servos and R/C equipment despite its compact nature. Big, tread patterned tires give superb traction and add to the overall cartoonish look of the Lunchbox Mini. Dish type wheels. Compatible with Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) as a power source. Aftermarket battery note: Battery pack size must be under 66x36x15mm in size. 370-type size motor included. Requires 2-Channel Radio, standard size servo, 7.2-7.4volt battery pack & compatible charger. Compatible with: item 51610 RC T301 Battery Case for use with 4 AA batteries if desired.  

The Tamiya MudMad is the second R/C model assembly kit on the super-compact and fun to drive SW-01 chassis. The body itself is inspired by off-road vehicles and was dreamt up by designer Takayaki Yamazaki who fans of Tamiya will remember from the Dual Ridge kit and other Tamiya vehicles. SW-01: Super-Compact 4WD 190mm long and 150mm wide, the SW-01 is a compact, highly fun 4WD chassis. A Type 370 motor is central in the slim monocoque frame, with gears transmitting its output to the front and rear of the model, where 70mm tires translate it into a powerful drive. The chassis power source is mounted in the top section to allow wild wheelies under acceleration. Strut type 4-wheel independent coil sprung suspension utilizes single piece upper arms to link left and right wheel steering motion, helping suppress roll during turns, and together with front and rear differentials realize a tight turning circle. Features 1/24 scale R/C model assembly kit. Length: 190mm. Lightweight and durable polycarbonate body. It is magnet- secured for swift attachment and detachment, and comes pre-painted in PS-3 Light blue. The body leans in the direction in which the model steers, achieving remarkably tight turning circles and helping to suppress roll. Strut style suspension. A central Type 370 motor transmits power to the front and rear in a gear-driven 4WD setup. Can be used with standard size servos and R/C equipment despite its compact nature. Aftermarket battery note: Battery pack size must be under 66x36x15mm in size. Requires 2-Channel Radio, standard size servo, 7.2-7.4volt battery pack & compatible charger. Compatible with: item 51610 RC T301 Battery Case for use with 4 AA batteries if desired  

Overview Introducing the 1/10 Scale Gravel Hound buggy to the XB Series. This XB version is fully-assembled and pre-painted with stickers pre-applied. The XB Gravel Hound features four-wheel independent double wishbone suspension, shaft driven 4-wheel drive train and oversized pinspike tires to ensure great off-road traction and excellent drive performance. Also features the easy to set up TEU-101BK electronic speed controller, and gear cover and spur gear cover to stop dirt and dust interfering with gear train. *Battery and charger not included. Features: The brand new DF-02 chassis is a shaft-driven 4WD chassis featuring a longitudinally mounted motor and battery. Featuring an overall lower center of gravity, the DF-02 displays superior stability and handling. The chassis also features a wide bathtub design that easily accommodates battery and all R/C mechanism. Semi ball bearing gearbox is fully sealed keeping dirt and stones out for easy maintenance and long lasting performance.    Oil dampers and 4-independent wheel suspension means tough off road running and fearless aerial action. DF-02 chassis features turnbuckle tie-rod for easy toe adjustment and oil dampers mounted with 5mm ball connectors. The Gravel Hound is the perfect solution to enjoy off-road racing.  Specifications: Total length: 400mm Total width: 249mm Total height: 170mm Chassis Material: ABS Suspension: Front and Rear Double Wishbone 4-independent wheel Drive train: Shaft-driven 4WD Equipped with a Type 540 motor Tire Diameter F/R: Both 86mm Required items: NiMH battery Suitable Charger

Custom Van With Added Bling 　 Tamiya's popular Lunch Box is back! This fully-finished, ready-to-run R/C car's unique van body features a prominent yellow paint scheme with eye-catching stickers. Metal-plated bumpers, front grille, and damper cylinders spice up the body even more, and combines with the massive monster truck tires to create an impressive monster van. Just install a 7.2V racing pack and some alkaline batteries for the transmitter and go on a trampling rampage. Go Anywhere Rear Wheel Drive Chassis 　 The tough box frame chassis features a rear wheel drive system that is both simple and efficient, with independent front swing axle and rear coil spring suspension. Massive 115mm diameter monster truck tires can conquer any terrain with ease, while the fully enclosed gearbox and differential gear are built to withstand the rigors of off-road driving. Press on the accelerator and watch the Lunch Box's nose go airborne as it sits on its wheelie bar for showstopping exhibitions. Features Resin chassis Two wheel rear drive 540 size motor with pre-attached leads Tamiya Expec SP AM pistol grip radio Plastic and metal bushings Four friction, plastic bodied shocks Shock resistant styrol pre-trimmed and painted with pre-applied decals, full size late '70s - early '80s full size van Sealed gearbox Rear differential Single speed transmission One-piece plastic wheels, Yellow in color 4.5" (115mm) diameter treaded monster tires TEU-101BK Electronic Speed Control with reverse Front plastic bumpers Four wheel independent double wishbone suspension Adjustable camber tie rods Adjustable steering tie rods Bell-crank type steering Servo saver included Requires Intellect 7.2V 3000Mah NiMH Ansmann 240V-7.2V Delta Peak Charger Venom AA Alkaline Batteries 4pce Includes One Tamiya Lunch Box Off-Road Van RTR with oil type shocks, 540 size motor, Electronic Speed Control, painted body, tires, wheels front bumper, pinion gear, spur gear, and instructions

 Slice Through Any Terrain Based on Tamiya's proven DF-02 chassis, XB Plasma Edge is perfect for beginners to get started with fast and furious 4WD off-road racing. Chassis comes fully assembled and body pre-painted for instant thrills out on the track. This complete set also features Tamiya's perfectly balanced Expec transmitter and R/C system, ensuring exceptional control and reliable handling no matter what the terrain may be. XB Plasma Edge is perfect for those wanting to make their buggy racing debut. Shaft Driven 4WD DF-02 Chassis. The DF-02 chassis is a shaft-driven 4WD chassis featuring a longitudinally mounted motor and battery. Displaying superior stability and handling the chassis features a wide bathtub frame to easily accommodate battery and R/C system. Drive train features a fully sealed semi ball bearing gearbox, keeping dirt and stones out for easy maintenance and long lasting performance. Oil filled dampers and independent wheel suspension allows tough off-road running and fearless aerial action. Easy setting adjustments thanks to turnbuckle tie-rods and ball connectors ensures this racing buggy gives you the performance you want. Specifications ●Length: 400mm ●Width: 249mm ●Height: 170mm ●Chassis Material: ABS ●Suspension: 4-wheel independent double wishbone ●Drivetrain: Shaft-driven full-time 4WD ●Type 540 motor included ●Tire Width/Diameter: (Front)32/86mm, (Rear)41/86mm ※7.2V running battery and alkaline batteries for transmitter not included.

This is a 1/10 ready-to-run R/C model of the 2008 WRC Impreza racing car. At the 7th Round of the 2008 World Rally Championship "the Acropolis Rally of Greece",the world has seen the Subaru WRC team unleash their new exciting 2008 Impreza. Withteam driver Petter Solberg at the helm, the Impreza went on to win 2nd place on debut.The Impreza has also gone on to win a 3rd place podium finish at the Round 9 "Neste OilRally Finland". Features Polycarbonate body captures the aggressive form of the Impreza. The improved steering linkage design features TA05 steering posts for sharper steeringresponse. Shaft driven 4-wheel drive TT-01 Type E chassis gives this electric R/C car superiorcontrol and handling. Equipped with LED Light Unit TLU-01. *It is possible to assemble with LED Light Control Unit TLU-02 (sold separately). 2 white and 2 red 5mm LED lights (Total 4) are included. Both front and rear light cases have two 5mm and four 3mm LED Light installation points. Includes ESC (TEU-101BK), Type 540 motor and 2-channel R/C system. Length: 434mm, Width: 188mm, Height: 141mm. Battery and charger separately required. Wide variety of Option Parts are separately available to customize your machine.

The ready to run electric powered R/C Car of the 2009 BMW M3 GT2 was developed to compete in the American Le Mans Series. Rahal Letterman Racing raced the cars on behalf of BMW Motorsports. The return of BMW to the American Le Mans Series competitions coincided with the 10-year anniversary of the series in 2008. Features TT-01 type E chassis with shock tower now molded separately from the gear case covers and new upper deck with transponder mount new A parts (Uprights) made of polycarbonate plastic material new D parts (upper deck, motor cover and more) made of fiberglass- reinforced nylon material Four wheel shaft drive 540 size motor with pre-attached leads Tamiya Finespec FM 27MHz pistol-grip radio with servo reverse, steering and throttle trims and standard servo Tamiya TEU-104BK ESC (TAMM4541) Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights Friction shocks, not oil-filled, composite body Sealed front and rear gearbox Bevel gear differentials Single speed transmission Treaded radial type tires 1.02" (26mm), 2.6" (66mm) diameter Brushed chrome color wheels 1.02" (26mm) wide, 2.04" (52mm) diameter Lightweight polycarbonate body, painted yellow with mirrors and body detail Foam front bumper Four wheel independent double wishbone suspension Non-adjustable camber, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Fixed non-adjustable steering tie rods, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Bell-crank TA-05 type steering with servo saver Servo saver included Includes: One Tamiya BMW M3 GT2 09 on-road car RTR, shocks, 540 motor, electronic speed control, painted body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions, LED light unit, rear wing and body trim decals, and 2-channel radio Requires: Battery: 6 cell stick pack with standard connector AA Batteries: Eight for transmitter Charger: AC/DC Timed or Peak for 6-cell battery Requires 7.2 battery  Charger

Famous Japanese brake parts manufacturer Endless adopted a fine-tuned Nissan 370Z as their official car. The car is adorned with their own stylish blue livery which also features panther drawings. Features Tamiya Finespec FM transmitter included Length: 451mm. The stylish form of the 370Z is accurately depicted with a durable polycarbonate body. Based on the TT-01D Type-E Chassis. Super Driftech tires (24mm width) come equipped on 24mm medium narrow silver metal-plated wheels (offset +2). Drift spec modifications include tuned suspension, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers (Super Mini), and adjustable upper arms. LEDs to depict headlights (white) and taillights (red) are included. Requires 7.2 battery & charger

Classic Off-Roader 　 Of the many iterations of the Toyota Land Cruiser, the 1972 Land Cruiser 40 is particularly popular thanks to its attractive styling and has a large fan base around the world. This ready-to-run R/C model's body is made from ultra durable polycarbonate and is beautifully finished in Mustard Yellow with the roof and rear fenders painted in white and black respectively. The actual vehicle's oval radiator grille, blinkers, front bumper, and side mirrors are accurately reproduced to provide a realistic scale appearance. In addition, LEDs to depict head (white) and tail (red) lights are included to further enhance its presence. R/C Units, Battery Pack, and Charger 　 R/C units are installed onto the pre-assembled chassis and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. The FM transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation. (*Battery pack and charger are included for Japan market only.) All Terrain Chassis 　 Highly reliable and efficient full-time 4WD system features a front/mid-mounted motor, which transmits power to the front wheels via the gearbox and to the rear wheels via the propeller shaft with universal joints. Excellent ground-hugging, long-stroke suspension system consists of front double wishbone and rear 4-link rigid setups and is equipped with 4 oil dampers. Realistic block-pattern tires are mounted on white wheels to allow exciting cross-country, off-road, and on-road R/C action. Requires 8xR6/AA/UM3 batteries for transmitter.