TAMIYA (2522)

This R/C FWD chassis assembly kit takes the cutting-edge M-07 Concept chassis and pairs it with a range of Tamiya Racing Factory (TRF) hand-picked option parts for a racing setup. It features a high-traction lower deck for a ground-hugging drive, plus carbon fibre battery holders, TRF special dampers, reinforced suspension arms and uprights, as well as rear stabilizer. The result is super grip, even on low-traction surfaces. An efficient drivetrain includes oil-filled gear differentials, full ball bearings, double cardan drive shafts, aluminium cup joints, hard-coated aluminium pinion gear and more. Features Carbon fibre battery holder (dedicated component) Rear stabilizer TRF special dampers (hard black coating) Double-cardan drive shafts (33mm) High-traction lower deck Reinforced C parts (uprights) Reinforced D parts (suspension arms) 3x106mm aluminium turnbuckle shafts Aluminium joint cups Clamp-type aluminium wheel hubs (5mm) 2.6mm diameter titanium-coated shafts 46mm titanium-coated shafts 06 module aluminium pinion gear (20T) Full ball bearings Hi-torque servo saver (black) Requires Compatible body 2-Channel R/C System w/ESC R6/AA/UM3 batteries for transmitter Type 540 Motor Battery Pack & Charger

To celebrate the 40th anniversary since the first sales of The Grasshopper and The Hornet, Tamiya welcomes The Grasshopper Black Edition as the new item number (original item number was 84416) This is a Limited Edition Grasshopper RC Kit. The original Grasshopper was released in 1984 which instantly became a hobby car kit hit throughout the 1980’s and 90’s. Even today it is one of Tamiya’s most successful kits thanks to its ease of assembly and fun driving capabilities.  Features This kit has a special black body and fluorescent yellow wheels, plus dedicated sticker color scheme. The simple but tough 2WD chassis features a monocoque setup that can absorb any type of rough handling. Comes with grooved front tires and paddle pattern rear tires. Solid ABS resin frame with durable body Diff gear protected by fully sealed gearbox 3-piece assembly type wheels Front swing axle independent suspension Rear rigid suspension w/coil spring Powered by 380 electric motor Includes Electronic Speed Controller, driver figure Requires 2 Channel Radio System, 1 Servo, Battery and Charger, Polycarbonate Paint for the Body, Tools for assembly.

The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler Truck AG. This R/C model assembly kit recreates the Arocs 4151 8x4 dump truck (gross vehicle weight: 41t), which runs on a 12.8-liter turbocharged inline-6 engine capable of 510hp.  The highly realistic polystyrene body has been pre-painted in the Tamiya Color TS-52 Candy Lime Green and given a lustrous urethane topcoat; the distinctive "bucket tooth" grille is recreated using separate parts, and there is plenty more to enjoy with rooftop light pods and a realistic interior.  A realistic one-piece bed is reinforced by a metal frame.  The ladder frame chassis features aluminum side channels with plastic cross members.  Both front axles are steered by a single servo.  Power from the front-mounted 35T TR Mighty Tuned Motor is delivered to the twin rear axles via propeller shaft.  Highly-realistic suspension utilizes metal leaf springs and friction dampers.  Tandem die-cast front axles have individual leaf springs, and reinforced plastic rear axles are a trunnion design.  The assembly type 3-speed transmission allows gear changes via a separately available 4-channel transmitter. This is a highly exact 1/14 scale radio control model that recreates the Mercedes-Benz Arocs dump truck in the 8x4 configuration. It features a highly realistic truck bed section behind the cab which can be operated by the radio transmitter, using the separately sold Actuator Set (Item 56545)! Unlike our earlier release, this version of the Arocs comes is a color variation. The cab and other parts are pre- painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black, with a urethane top coating for a high- quality finish. The model's ladder frame chassis features aluminum side channels with resin cross members and is equipped with a highly realistic suspension using metal leaf springs and friction shock-dampers. A front-mounted motor and 3-speed transmission power the two rear wheel axles, which are fitted with built-in differentials to enable smooth cornering. A separately sold 4-channel R/C system and multi-function unit allow you to drive the vehicle and experience realistic lights, sounds and vibrations. (Both sold separately) Features 1/14 scale R/C model assembly kit. Length: 667mm, Width: 196mm, height: 268mm. The Arocs 4151 form is recreated with an injection molded body, including depictions of cab rails, intake duct and other details. Separate parts recreate side mirrors and visor, etc. Both front axles are steered, via a single servo. Wheels turn realistically at slightly different angles. The Tamiya 4-axle chassis feature a tough ladder frame with aluminum side channels and plastic cross members. Features a brand-new truck bed section formed of metal subframe for superb durability. Install the separately sold Actuator Set (Item 56545) for realistic truck bed motion. TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the truck bed. The new battery case is found over the second axle, which allows access even when there are loads in the bed. The roof features a depiction of light pods on the visor, which can be fitted with LEDs for a realistic finish. 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter. Metal leaf spring dampers with built-in coil springs provide durable suspension. Use with separately sold MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds. The highly realistic cab plus H, K, M, HH and vessel parts are molded in green and pre-painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black, with a urethane top coating. L (interior) parts are molded in black (originally was white) and paints are not needed. Requires Tamiya Attack 4-channel radio Steering servo ESC 7.2volt battery & battery charger Tamiya TS spray paint.

Pocket-Sized Panther　 The Panther Type G was one of the German army's frontline tanks during the later years of WWII, and Tamiya has now reproduced it as a 1/35 scale R/C model kit. Featuring the same high level of detail as regular 1/35 scale static models, this tank's hull has been modified to enable installation of working running gear and R/C mechanisms, providing fans with another dimension of enjoyment. Compact gearboxes and turret rotation/gun elevation unit come fully-assembled for easy installation and enable realistic driving action. 4-channel ACTCOM transmitter gives you full control of forward/reverse, left/right turning, turret rotation, and gun elevation. Changeable 27MHz FM frequency crystals means multiple tanks can be operated in the same area to create a mock battlefield. Developed as a countermeasure to the Soviet T-34, the German Panther tank was produced from 1943 until the end of the war and served alongside the Panzer III, IV and Tiger tanks. The Panther tank featured sloped armor, powerful 700hp Maybach engine and a turret placed far back on the hull mounting a 75mm L/70 cannon. The main gun was even more devastating than its size of 75mm would suggest, due to the large propellant charge and long barrel with high muzzle velocity. Many consider the Panther every bit as effective as the Tiger I, but easier to produce and maintain. The Ausf.G included versions with heater unit installed over the left engine fan, and with curving lower "chin" piece removed from the mantlet to eliminate shot trap. FEATURES Barrel of the L/70 75mm gun can be elevated 7 degrees and depressed 8 degrees. Turret can be complete a full 360 degree rotation in 25 seconds. Compact gearbox controls both turret rotation and gun elevation. Two compact gearboxes with 1:90 gear ratios drive the caterpillar tracks for realistic tank movement. Wide tracks are made from durable resin material and are heat-treated to ensure secure assembly. Tank is powered by 4 alkaline batteries, which can be accessed via a hatch on the underside of the hull. Requires　 4 R03/AAA/UM4 alkaline batteries for tank 1 006(9V)/6F22 alkaline battery for transmitter

Features It is the 1/35 RC model of Mark IV, the first mass production tank of the history that British troops put into practical warfare during the First World War. Two assembled gear boxes equipped with dedicated motors are mounted on the rear of the car body, and the crawler belt is connected movable. By operating the transmitter forward and backward, right / left gentle turning, pivoting the pivot point, pivoting the super pins, you can switch the maximum speed to 4 steps by operating the button. 3 kinds of markings, 2.4G dedicated props included. Requires 4 AAA alkaline batteries for transmitter and 4 AAA alkaline batteries for receiving and running (sold separately).

Dynamic Tank Battles This 1/35 scale assembly kit R/C tank features exciting and realistic maneuverability with sound and light effects. Kit includes pre-assembled gearboxes and turret rotation unit for ease of assembly. Forward/reverse running, left/right turning, sharp turning, and pivoting, as well as turret rotation and main gun elevation/depression can be controlled. The onboard speaker produces realistic sound effects such as engine sounds, main gun firing, damage sounds and explosions. Main gun muzzle flash and hull recoil effect are also reproduced. Tamiya's unique infrared light system will allow you to have battles with 2 or more tanks. The model features highly detailed upper hull with lower hull and idler wheels specially designed for R/C operation. About the Type 10 Tank The Type 10 is the new jewel in the JGSDF's crown; officially commissioned in 2010, it has a domestic-manufactured 120mm smoothbore gun and highly effective modular armor, giving it an excellent balance of offensive and defensive capabilities. Compatibility with the C4I network system has also been designed into the vehicle, and this enables the coordination among units of various actions. The lightweight body is paired with a liquid-cooled V8 engine which makes the Type 10 a highly maneuverable, state-of-the-art tank. FEATURESBattle System This battle system emanates infrared light when the gun is fired. When the light sensor unit receives a hit, MC-06 Control Unit produces various effects such as damage and engine trouble sounds, speed reduction, as well as the depression of the main gun when "knocked out". 2.4GHz System 2.4GHz system eliminates the need for frequency crystals, allowing multiple models to operate in one area. Digital proportion enables fine speed and turning controls. Easy Operation Left stick controls forward/reverse and left/right turning, while right stick controls turret rotation and gun elevation. Main/machine gun firing and engine start/stop can be operated by 4 buttons. Volume adjustment and tank mode change can also be operated by the transmitter. REQUIRES Tank: R03/AAA/UM4 Battery x4 Control Unit: 6F22/006P(9V) Battery x1

Updated Russian Hero! Tamiya 1/35 R/C Russian Medium Tank T-34-85 (w/Control Unit) The T-34-85 gets an updated re-issue with a modern transmitter and control unit set, plus new assembly type tracks! The T-34-85 was essentially an answer to the dominating German Tiger and Panther armor. It was manufactured from 1944 to 1946 and contributed to the Soviet march on Germany. Servos, battery pack and charger are sold separately. The model features a detailed upper hull, with dedicated R/C model lower hull and road wheel components. New assembly type tracks allow depiction of track ‘sag’ without compromising the tank’s motion. Two drive and two turret control unit motors are included, and four model speed options can be selected. Length: 238mm. Image shows painted and assembled kit. Requires Suitable NiMH battery Suitable Charger Paints and glue for assembly

4mm Adjuster (Black), (Buggy Champ/Sand Scorcher/Truck)