Reset
TAMIYA
Tamiya 35177 1/35 German St...
$50.95
A very rare variant of the much feared Tiger I heavy tank, was the ‘Sturmtiger’ assault weapon that mounted a gigantic 38cm caliber mortar on the tank chassis.
Development was initiated in August 1943 and was intended for uses against heavily fortified areas. Th short barreled L/5.4, type RW61 mortar was originally developed by Rheinmetall-Borsig, for the German navy’s land-based protection against an enemy submarine attack. In order to withstand the heavy recoil of up to 40 tons, the Tiger I’s sturdy chassis was selected. A decision was made to use only those chassis/hulls that were sent back from the front, so that new production of the tank would not be affected.
A fighting compartment was formed of a boxlike superstructure which was bolted to the lower hull itself. Its armor plate measured 150mm thick at the front and 80mm on the sides. Later, a steel ring counterweight was added to the mouth of the mortar barrel on some vehicles to make elevation aiming easier. The mortar’s huge self propelled rocket projectile was 149cm long and weighed 330kg. For loading these heavy rockets aboard, a hand cranked crane was mounted to the right aft side of the upper hull.
Due to the rocket’s size, storage space was very limited and only 14 shells could be carried. Conversion production of the Sturmtiger began in August 1944, and by the end of December a total of 18 units had been completed and sent to the front for action during the final stage of the conflict.
TAMIYA
Tamiya 35179 Tiger I Etched...
$10.95
$11.99
This is a 1/35 scale photo-etched upgrade set designed for use with Tamiya mid-late production Tiger I kits, 35146 and 35194. This set adds enhanced detailing to the engine deck area with etched grilles, and also includes anti-aircraft sights for other Tiger variants. The fine detail of the etched parts will provide another layer of realism to the original model.
This photo-etched grille set features metal parts to depict the engine air-intakes and exhausts, bullet proofing nets, and sights for the anti-aircraft machine gun for mid and late production Tiger-I and Sturmtiger tank models. The photo-etched metal parts will provide your model with a sharper and a more realistic scale finish.
This set is for use with Tamiya 1/35 Tiger I Late Version (35146), Sturmtiger (35177) and Tiger I Miid Production (35194). Not compatible with 35056 Tiger I and 35216 Tiger I Early Production.
TAMIYA
Tamiya 35180 1/35 German Ta...
$14.95
Tamiya is famous for its series of Military Miniature model kits in exact 1/35 scale of military vehicles, plus figures in many poses from forces all over the world. Ideal for the constructing of diorama and shadow box art, these military miniature models are exact in detail, down to the facial expressions on the soldiers themselves. Paint, tools and glue not included.
TAMIYA
Tamiya 35181 1/35 Panzer Mk...
$44.95
For a single base tank design to fight through the entirety of WWII was something of a rarity, but the Panzerkampfwagen IV proved its enduring efficacy by doing just that.
Features
This precision plastic model depicts the Ausf.J variant of the rustic tank, which toted a 75mm gun and the distinctive "Schurzen" armor additions.
Modelers can assemble the kit with open or closed hatches and brake maintence panel, and are also given the choice between cast metal and tubing idler wheels for the complex suspension.
Additionally, the kit features belt type tracks and a realistic commander figure.
TAMIYA
Tamiya 35182 1/35 Pz.Kpfw.I...
$13.95
These highly realistic accessories are the perfect way to bump up the realism of your 1/35 scale Panzerkampfwagen IV model. They recreate 6 each of armor-piercing 39 shells, high explosive 34 shells and empty shell cases.
TAMIYA
Tamiya 35184 1/35 German Ma...
$11.95
This is a plastic assembly model kit of a WWII German machine gun crew in M43 field uniforms and boots with leggings as seen on German soldiers from 1943. This five figure set features a noncommissioned officer carrying an MP40 submachine gun in his hand, three soldiers carrying ammunition cases and a tri-pod gun mount respectively, and the machine gunner with a MG42 machine gun on his shoulder. The set includes sharply detailed parts to depict equipment such as MG42 and MG34 machine guns, tripod, and ponchos. Combine it with models of tanks and other vehicles belonging to the German army for a wider scale diorama.
TAMIYA
Tamiya 35185 1/35 Panzer Mk...
$6.95
This set is of the equipment seen loaded onto the hull of German tanks such as the Panzerkampfwagen IV during WWII.
Features
Tools seen equipped on the fenders of German tanks and the Pz.Kpfw.IV such as 18- and 20-ton jacks, bar and wire cutters, an ax and a spade, as well as tools to adjust the tension of the tracks and the cleaning rod for the main gun are included in the set.
Use it to add greater detail to a wide range of German tank and AFV models.
TAMIYA
Tamiya 35186 1/35 German Fu...
$7.95
During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set.
Features
The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army.
Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included.
Use this set as accessory parts to expand dioramas featuring German subjects.
TAMIYA
Tamiya 35187 1/35 Zimmerit ...
$10.95
During WWII, the German army applied Zimmerit coating to their tanks in order to combat magnetic anti-tank mines. This set of photo-etched applicator blades will help you to apply Tamiya Polyester Putty to realistically replicate the Zimmerit coating on your model.
Includes four sizes of applicator blade to allow you to apply a coating on both wide and narrow surfaces.
TAMIYA
Tamiya 35188 1/35 German Ta...
$11.95
This set will allow you to easily recreate a WWII scene of German soldiers loading a tank with shells.
Set includes four figures in a variety of poses as well as parts to depict the ammunition and wooden ammunition cases. Ammunition cases can be used as a highly authentic addition to Tiger I, King Tiger, Panther, and Pz.Kpfw. IV tank models.
TAMIYA
Tamiya 35189 1/35 Tiger I B...
$11.95
This set accurately depicts the brass projectiles used with German WWII 88mm anti-aircraft guns. Includes five of both Sprgr.L/45 and Pzgr.39 projectiles as well as six spent shells. Using this set as accessory parts with a Tiger I heavy tank or an 88mm anti-aircraft gun model will provide them with an even more authentic finish.
TAMIYA
Tamiya 35190 1/35 U.S. Medi...
$33.95
This is a 1/35 scale plastic assembly kit of the M4 Sherman, the U.S. Army's mainstay tank during WWII which greatly contributed to the eventual Allied victory.
Features
The kit depicts an early production version that was powered by a radial engine and featured sloped frontal armor and a turret without a loader's hatch.
Different production methods were used to produce the actual tank, and the welded hull and cast turret have been accurately reproduced.
Modellers can also enjoy turret interior details such as the main gun breech and radio equipment.
Parts for accessories such as additional hull and turret armor, large fenders, and spare track links are also included.
Comes with driver and radio operator torso figures as well as 1 commander figure.
TAMIYA
Tamiya 35191 1/35 M4 Sherma...
$12.95
This 1/35 scale set features highly polished parts to depict the brass shells used with the M4 Sherman's 75mm gun. The set includes six M48 high explosive projectiles used when supporting soldiers and six anti-tank M61 armor piercing shells. Combine this set with your M4 Sherman tank diorama for an even more realistic finish.
TAMIYA
Tamiya 35192 1/35 US Army A...
$9.95
This plastic assembly model set features six (two noncommissioned officers & four infantrymen) U.S. WWII soldiers in a variety of dynamic in-battle poses.
Features
These figures are depicted wearing authentic M1941 and M1943 field jackets and canvas leggings.
The tense situation of battle can be clearly seen through the expressions of the models such as the noncommissioned officers giving instructions to their men who are waiting for the order to attack.
Weapons such as the M1 Garand rifles and Thompson submachine gun have a sharp realistic finish.
TAMIYA
Tamiya 35193 1/35 German Mo...
$8.95
During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling “fire!” The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit.
TAMIYA
Tamiya 35194 1/35 Tiger I M...
$44.95
The German Tiger I Tank featured a powerful 88mm gun as well as an excellent armor and was the greatest opponent to Allied forces during WWII.
Features
This is a 1/35 scale plastic model of the mid-production variant of which 1,354 units were produced from July 1942 to August 1944.
The distinct silhouette and features of the mid-production model including the mechanically-complicated suspension, detailed loader's hatch, and equipment such as a scoop have all been realistically reproduced.
The model features link type assembly tracks to enhance scale realism.
TAMIYA
Tamiya 35195 1/35 MT1 SPW S...
$30.95
During WWII, German armored divisions effectively used Hanomag half-track armored carriers in transport and support roles. Among the many variations was the Sd.Kfz. 251/1 Ausf.D which first appeared in 1943 and is now faithfully depicted as a plastic assembly model kit. The features of the distinctively styled Ausf.D which includes the open top cabin, seats, and wireless radio have been realistically reproduced in great detail. The rear gate can also be depicted in either open or closed position.
Included with the Ausf.D are 4 figures in dynamic poses such as the driver looking back from the driver's seat as well as the commander showing the direction of the enemy. In addition, weapons such as a Panzerfaust and MG42 machine gun are included with the kit for added realism.
Length: 173 mm.
TAMIYA
Tamiya 35196 1/35 German Fr...
$11.95
During WWII, German soldiers belonging to armored divisions wore camouflage smocks and M44 field uniforms. This is a plastic assembly kit of five figures which features a noncommissioned officer and a soldier in charging poses armed with a panzerfaust and a MP44 assault rifle, a soldier shooting an MG42 machine gun from his waist, a soldier throwing a hand grenade, and another noncommissioned officer firing his MP44 from his knees. Weapons and accessory parts such as water bottles and gas mask cases all have a sharp detailed finish.
TAMIYA
Tamiya 35197 1/35 Stug III ...
$41.95
During WWII, the German army used self-propelled guns in large quantities with one such gun being the German Sturmgeschütz III. This plastic assembly model kit realistically reproduces the form of the Ausf.G early version which was manufactured from December 1942. The distinctive low silhouette of the StuG III, with the fighting compartment mounted onto the Panzer III's hull, features great scale realism.
The kit also includes parts to allow you to depict the StuG III with either a 7.5cm anti-tank howitzer or the 10.5cm gun used to support the infantry units. Parts to depict Schürzen armor as well as two figures in relaxed pose feeding and holding a puppy are also included.
TAMIYA
Tamiya 35198 1/35 Stug III ...
$9.95
Add even more realism to your StuG. III model with this projectile set. Includes armor piercing and high explosive shells (three each) that were used with the StuG III's 7.5cm and 10.5cm guns. In addition, the set also includes shell cases (three each). The brass shell parts feature a highly shiny finish.
TAMIYA
Tamiya 35199 1/35 Stug III ...
$10.95
Add greater realism to your model with this photo-etched grille set which depicts the StuG III's engine air-intakes, air-intake inlets, and the exhaust's protective nettings. Sights for MG35 and MG42 anti-aircraft guns also included.
TAMIYA
Tamiya 35201 1/35 German Ta...
$10.95
This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models.
TAMIYA
Tamiya 35203 1/35 Jagdpanth...
$38.95
The German tank destroyer Jagdpanther used the proven Panther medium tank chassis fitted with a fixed fighting compartment and a powerful 88mm gun.
Features
A late production variant of the Jagdpanther now comes as a 1/35 scale plastic assembly kit model.
You can choose to assemble a Jagdpanther produced from May to
December 1944 or from December 1944 onwards. The fighting compartment interior features superb details including the main gun loading part, bulkhead, and commander's seat.
Movable escape hatch as well as open/closed selectable hatches provides the model with a greater presence. Kit includes parts to depict die-cast type exhausts as well as exhausts with flame dampers.
A commander figure is also included.
TAMIYA
Tamiya 35207 1/35 Russian A...
$18.95
This is a 1/35 scale plastic assembly model set of a Russian Army Assault Infantry unit which protected Mother Russia against the invading German forces during WWII. This set includes 12 figures in different poses such as a commander pointing and giving instructions, as well as soldiers shooting from up above and jumping off a tank. Uniforms depict those worn at the Kursk front from 1943 through to the end of the war. The PPsh-41 submachine gun also known as the "Mandolin" and the Degtyaryov light machine gun both feature a sharp finish.