Reset
TAMIYA
Tamiya 32600 1/48 German Se...
$39.95
Big Power, Compact Scale
Armor evolved exponentially during WWII as both sides tried to gain the upper hand on one another; the Nashorn was one of the German answers to powerful Allied vehicles. Based upon a chassis employing Pz.Kpfw.III and IV components, and employing a brand new hull with a fearsome 8.8cm gun, The Nashorn debuted in Summer 1943 at the pivotal Battle of Kursk, where it put its phenomenal armor piercing abilities to effective use. It would serve until the end of the conflict, proving a constant thorn in the Allies' side.
Features
This is a 1/48 scale plastic model assembly kit. Length: 176mm, width: 62mm.
The open top form with powerful 8.8cm gun is captured in style, and the model features a detailed interior to boot.
An ergonomic parts breakdown nevertheless delivers a realistic depiction of the suspension. Assembly type tracks have one-piece straight sections.
Weights are included to give the model a realistically heavy feel.
Comes with a single figure (in cold weather uniform) and two marking options.
TAMIYA
Tamiya 32601 1/48 British M...
$37.49
Desert Warrior
The Challenger 2 took over main battle tank duties in the British armed forces from the Chieftain and Challenger 1 in the early 1990s. Its hull design was based upon the latter of the two, and paired with a brand new turret with the state-of-the-art 120mm rifled gun. Challenger 2s seen in the Iraq War in 2003 took on and defeated enemy tanks such as T-54s and T-55s.
Features
This is a 1/48 scale plastic model assembly kit. Length: 243mm, width: 84mm.
The modern form with flat panels and 120mm rifled gun is captured in style, with an ergonomic parts breakdown.
Comes with components to recreate typical Iraq War features such as additional armor and canvas side skirts.
Assembly type tracks have one-piece straight sections.
Decals are included for periscope, turret-front Combat Identification Panel and more.
Comes with a commander torso figure and one marking option.
TAMIYA
Tamiya 32602 1/48 WWII Wehr...
$20.95
These highly accurate figures depict infantry in the WWII German Wehrmacht, and were designed using the latest 3D scanning techniques.
Ten figures in total are included, with subjects such as an NCO with binoculars, a rifleman in the rubble, and various soldiers pictured on the move, or even on the ground - a truly versatile offering.
Features
Use these figures with the many armor models in the same 1/48 Military Miniature series, for a brilliant diorama
Finely molded weapons such as the Kar98k rifle, plus MG34, MG42 and MG40 guns.
Figures and accessories fit superbly together for a highly realistic finish.
TAMIYA
Tamiya 32603 1/48 German He...
$31.95
A Formidable Feline
When it appeared in 1942, the Tiger I represented a significant evolution in German armor, with its heavy armor and 88mm gun. Tiger Is produced between November 1942 and June 1943 can be termed early production versions, and featured a tubular cupola and hull rear air cleaners. Mainly deployed in new heavily armored battalions, early production Tiger Is were largely powerful sent to the Eastern Front, where they enjoyed clear initiality.
Features
This is a 1/48 scale plastic model assembly kit. Length: 175mm, width: 77mm.
The bulky, heavily-armored Tiger I form is artfully rendered in 1/48 scale, with faithful reproduction of early production vehicle features.
Features a realistic representation of the suspension, with assembly type tracks using one-piece straight sections.
Install the included weights in the plastic lower hull to give the model a realistically heavy feel.
Comes with 2 marking options, for tanks deployed on the Eastern Front.
TAMIYA
Tamiya 32604 1/48 U.S. Howi...
$29.95
Mighty Mouse
US designers developed the M8 during WWII as an upgrade over existing half-track vehicles, using the M5 light tank chassis with an open turret on top; its 75mm M3 howitzer could fire anti-tank and smoke shells in addition to standard rounds. 1,778 M8s were produced between September 1942 and January 1944, and they wherever US units were active, until the end of the conflict: in Italy, Western Europe and the Pacific, utilizing their excellent mobility and firepower in a range of missions including attacks on enemy fortifications.
Features
This is a 1/48 scale plastic model assembly kit. Length: 92mm, width: 48mm.
The diminutive M8 form with tall profile is recreated accurately based upon extensive research.
Features interior details of turret such as sights and gun breech, plus howitzer covered by its distinctive sleeve.
Really captured suspension with ergonomic parts breakdown.
Assembly type tracks feature one-piece straight sections.
Includes one commander figure and two marking options.
TAMIYA
Tamiya 32605 1/48 British 2...
$34.95
Always on Call
Around 13,000 examples of this sturdy and reliable 2-ton 4x2 ambulance were produced during WWII; based upon a civilian truck, it was designed with the input of the Medical Corps and had bench seats that could be converted into two-level beds. It served in France, North Africa, Italy, and even across Western Europe after the Normandy invasion, and was often seen not just with Army units, but also at airfields and the like.
This is a 1/48 scale plastic model assembly kit. Length: 199mm, width: 48mm. The truck-based form is captured accurately, based upon extensive research of the actual vehicle. It features succinctly and realistically depicted suspension. Why not use this in dioramas with other British WWII vehicles? Comes with a driver figure and two marking options.
Features
This revised road vehicle is rendered expertly in compact 1/48 scale.
A driver figure is included in the kit, and the doorway's canvas is depicted rolled up.
Suspension and other underside components are realistically rendered while keeping to a reasonable number of parts.
Highlights at the front of the model include the mesh grille sections and clear parts for the headlights.
A comprehensive decal sheet features large red cross graphics and more. 2 marking options are included.
TAMIYA
Tamiya 32606 1/48 U.S. Ligh...
$32.95
U.S. Light Tank M5A1 Stuart
Specification
Number:32606
Scale: 1:48
Type: Full kit
TAMIYA
Tamiya 32607 1/48 German Ma...
$46.95
1/48 Scale German Leopard 2 Main Combat Tank A7V
Following the release of Item 35387 1/35 German Main Battle Tank Leopard 2 A7V, we are delighted to announce the appearance of the Leopard 2 A7V in the 1/48 Military Miniature Series. The model recreates the Leopard 2 A7V succinctly yet realistically. This kit uses one-third of the number of parts used for Item 35387, which ensures ease of assembly but an accurate depiction.
Leopard 2 A7V
In May 2017 it was decided to give the Bundeswehr Leopard 2 tank an upgrade in the form of the Leopard 2 A7V; building upon the A7 variant, the A7V has additional hull front armor to increase its survivability, with new running gear to compensate for the extra weight. Its L/55 120mm gun is a carryover from the A6 variant which - when using the latest ammunition - can take on enemy armor up to five kilometers away. Other design evolutions include a sight device to amplify vision in poor visibility, new tracks and a new turret rear basket. 104 existing tanks are to be upgraded to A7V spec, and units began receiving them in September 2021.
Features
This is a 1/48 scale plastic model assembly kit. Length: 234mm, width: 80mm.
The powerful Leopard 2 A7V form with square headlights, front additional armor plate and updated turret rear shape is faithfully captured based on extensive research of the actual tank.
Anti-slip patterns on upper turret and hull are realistically depicted.
Assembly type tracks have one-piece straight sections.
Includes one torso figure which depicts a commander.
Comes with a choice of two marking options of the 393rd Panzer Battalion.
Decals are ready for use in the depictions of details such openings of periscopes and turret-side basket sections.
Separately sold weights (19403174) can be used to add heaviness to your model.
TAMIYA
Tamiya 35009 1/35 German Pa...
$12.95
This is a 1/35 scale plastic model assembly kit depicting the Panzerkampfwagen II, which contributed to early German successes in WWII.
Features
The compact form of the 20mm cannon-toting AFV is captured in style.
Commander's hatch can be assembled in open or closed state.
Five figures, one in tropical uniform and four in Afrika-Corps garb.
TAMIYA
Tamiya 35013 1/35 U.S. Army...
$4.95
This is a 1/35 scale plastic model assembly kit depicting US infantry in Western Europe after the Normandy Landings in June 1944.
Features
Their subjects are captured in realistic pose: lobbing a grenade, cocking firearms and holding a flamethrower.
Three of the figures are depicted in standard cloth legwear, and one in leather.
TAMIYA
Tamiya 35017 1/35 German 88...
$30.95
This is a 1/35 scale plastic model assembly kit depicting the feared German Flak36/37 88mm gun from WWII.
Features
Over three hundred parts are used to build up this realistic kit.
Moving parts allow elevation and rotation of the gun, while the trailer is screw-attached.
Comes with a motorcycle model and no less than nine figures in action pose.
TAMIYA
Tamiya 35020 1/35 German Ha...
$30.95
The Sd.Kfz.251 belonged to the stable of half-track vehicles operated by the Wehrmacht during WWII. Production began in 1937, and early "A" variants were powered by a 100hp, 4,171cc inline-six engine. Its half-track running gear was a huge plus on uneven terrain, and it could transport up to ten soldiers, or equally effectively pull guns and other trailers. It was present during the 1939 invasion of Poland and immediately showed its effectiveness as a part of the much-vaunted swift German attacks. Numerous other variants including anti-tank guns were made, and its production run came to 16,000 vehicles by the end of the war in 1945, contributing on all fronts for beleaguered German forces.
Features
This is a 1/35 scale plastic model assembly kit. Length: 168mm.
The blocky, utilitarian half-track form is recreated in style.
Rear hatches open after completion of assembly.
Detail such as the driver seat is visible from the open top, and the running gear is realistically depicted.
Five figures are in action pose.
Decals are included to recreate license plates and unit markings for vehicles on the Eastern front and in the North African theatre.
TAMIYA
Tamiya 35025 1/35 Sand Bag Set
$4.95
This is a 1/35 scale plastic model assembly kit recreating sandbags that will add a whole extra level of realism to your diorama scenes. Includes forty-eight sand bags.
TAMIYA
Tamiya 35026 1/35 Jerry Can...
$4.95
This is a 1/35 scale plastic model assembly kit recreating various jerry cans, barrels and other containers. Use them to add extra life to your diorama creations, placing them upon AFVs or in the hands of figures. Includes nine each of US and German type jerry cans, plus three each of new and dented barrels.
TAMIYA
Tamiya 35027 1/35 Barricade...
$4.95
This is a 1/35 scale plastic model assemble kit recreating barricades that will add a whole extra level of detail to your diorama scenes. Creates six each of wooden and metal barricade representations.
TAMIYA
Tamiya 35028 1/35 Brick Wal...
$4.95
This is a 1/35 scale plastic model assembly kit depicting brick wall sections that will add extra life to your diorama scenes.
Features
Includes three different shapes of wall section.
The package features an illustration of an urban scene which can be cut out to add even more background detail.
TAMIYA
Tamiya 35030 1/35 German As...
$6.95
This is a 1/35 scale plastic model assembly kit depicting German WWII assault troops.
Features
From an officer directing his troops to soldiers wielding weapons and other accessories, the set is full of life thanks to realistic poses.
Uniform from mid-WWII onwards is depicted.
TAMIYA
Tamiya 35033 1/35 British S...
$12.95
This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.
The SAS is short for the Special Air Service. This was a special service unit organized in 1941 by young British officer David Stirling and showed activity in the desert of North Africa. The only one mission of the SAS was to weaken the enemy by infiltrating deep through enemy lines and harassing the rear. It was the Jeep that the SAS used as their main means of transport. Although inferior to the Chevrolet Truck in loading capacity, the Jeep with superior cross-country ability was best suited for the mission of the SAS
TAMIYA
Tamiya 35035 1/35 German 3....
$5.95
This is a 1/35 scale plastic model assembly kit depicting the 37mm Pak35/36 anti-tank gun deployed by German WWII forces.
Features
The gun is comprised of numerous parts for an authentic look. It offers elevation and traverse movement.
Choose between standard and late-war barrels.
Comes with various accessories and four figures as a mini-diorama in its own right.
TAMIYA
Tamiya 35038 1/35 German Ma...
$6.95
This is a 1/35 scale plastic model assembly kit depicting WWII German soldiers with MG34 and MG42 machine guns.
Features parts to make three different teams of gunner and loader, plus a commander with binoculars for seven figures in total.
TAMIYA
Tamiya 35039 1/35 U.S. M3 T...
$36.95
The M3 Lee was named for the American Civil War general and was a British variant of the U.S. mainstay from 1941 to 1943. The M3 was equipped with a 75mm main gun and a 37mm turret-mounted gun, but eventually, it would be replaced with the M4 Sherman. During its heyday, 4,924 units were produced.
This 1/35 scale model from Tamiya features all the high-quality details you come to expect from the model company and features a commander torso figure.
TAMIYA
Tamiya 35040 1/35 US M113 A...
$25.95
This plastic model assembly kit recreates the M113 APC which was fielded in Vietnam, and could even operate in the water. The model features detailed recreations of the engine, crew seats and more. Engine room cover and rear gate are opening parts, and five Vietnam War era figures are included in the set.
TAMIYA
Tamiya 35041 1/35 British A...
$36.95
1942: Struggling to contain the dashing Africa-Corps led by the inimitable Rommel, British troops in North Africa were feeling the loss of the most part of their armor in the hurried evacuation from Dunkirk. A much-needed boost was provided by the appearance of the M3 Grant medium tank, a British-modified variant of the U.S. M3 Lee. While the 75mm main gun remained unaltered, a larger turret was installed for the 37mm gun, and the 7.62mm machine gun removed from its top. The M3 Grant suffered from notable problems such as limited traverse of the 75mm gun, and a conspicuously tall silhouette, but to the relief of the beleaguered British troops, its firepower proved sufficient to take on opposing Panzer IIIs and IVs, leading to the start of a British fightback in North Africa.
Features
This is a 1/35 scale assembly kit of the M3 Grant, which authentically captures the unique form of the tank.
Length: 170mm.
Riveted surfaces are depicted with realism.
75mm and 37mm guns are both movable.
Modeler can choose whether to assemble the kit with open or closed hatches.
Features realistic plastic tracks.
Decals are included to recreate vehicles from the Battles of El Alamein and Gazala.
Tankman figure adds an extra layer of realism to the model.
TAMIYA
Tamiya 35044 1/35 British 2...
$25.95
This plastic model assembly kit recreates the combination of 25 pdr. field gun and quad gun tractor employed by British forces from WWII to the Korean War. The modeler can choose whether to depict the gun as ready to fire or in transport, and the tractor features separate parts for elements of the cabin and engine.