peco (439)

Adapted from the existing PECO Setrack Curved turnout, this brand new development allows us to add a really useful component into the classic Streamline OO/HO Code 100 range. At last we are able to offer a tighter radius turnout for Streamline users, something that has been requested on and off for a long time. Curved turnouts are fantastic space savers and their benefits are often overlooked. Given that so many layouts are built to be located in small spaces the use of curved turnouts ought to be greater than it is, so these new Streamline turnouts may well address many concerns that modellers have when planning their model railway. This turnout has been derived from the existing Setrack curved turnout the geometry departs from the common frog angle adopted by the Streamline system (which is based on a common frog angle of 12 degrees) - this turnout has a 11.25 degree frog angle and the inner radius is just 438mm, or 17.2 inches. This should not be seen as any disadvantage and the real benefit is that they will allow much tighter access where it is needed, such as in restricted places where a layout has to loop around into a fiddle yard, for example. The standard Streamline curved turnout has a minimum inside radius of 762mm, 30 inches, so the difference is quite clear to see. Specification Length: 168mm Radius: 438mm

We are pleased to announce the release of the SL-U8361 and SL-U8362 code 83 #6 turnouts. The PECO Streamline “83 Line” Code 83 track system has been many modellers’ premier choice for modelling American railroads since it was launched back in 2004. As part of our ongoing improvements we recently had the opportunity to re-tool the #6 turnout, which now benefits from one piece machine point blades, and the introduction of the Unifrog format to give the modeller options for wiring. We can help you further understand the concept behind Unifrog, which replaces Electrofrog and Insulfrog, but incorporates the benefits of both.

We are pleased to announce the release of the SL-U8361 and SL-U8362 code 83 #6 turnouts. The PECO Streamline “83 Line” Code 83 track system has been many modellers’ premier choice for modelling American railroads since it was launched back in 2004. As part of our ongoing improvements we recently had the opportunity to re-tool the #6 turnout, which now benefits from one piece machine point blades, and the introduction of the Unifrog format to give the modeller options for wiring. We can help you further understand the concept behind Unifrog, which replaces Electrofrog and Insulfrog, but incorporates the benefits of both.

Double slips can save valuable space at station approaches, junctions etc. 83 Line items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings. This double slip features our new versatile Unifrog design which can be operated, powered and switched like an Electrofrog or left unpowered if preferred. Specification Length: 305.7mm Frog Angle: 9.5 Degrees SL-110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork

The latest conversion to Unifrog is now available. This time we have updated the Streamline OO/HO scale Code 100 Small Radius "Y" turnout to conform to this new format. Produced from brand new tooling this replaced the former Insulfrog and Electrofrog SL-97 and SL-E97 (both of these are now discontinued and out of stock). Y Turnouts are really useful track components - their main benefit being as great space-savers. By combining the Y with the short crossing you can create a tight radius double junction and using several Ys together allows you to fit more routes in a restricted space. Ideal when building small loco yards and goods sidings. It's what the real railways would have done after all! The Unifrog Conversion On a Unifrog turnout the frog tip and wing rails are electrically isolated from all other rails. The turnout can be used as supplied on a DC or DCC layout without any modification, using the standard SL-10 rail joiner. If desired, the frog tip and wing rails can be powered by connecting the wire welded underneath to a changeover switch or microswitch working in unison with one of our turnout motors. Basically, as supplied the turnout operates as an Insulfrog turnout. If the frog is powered then it operates as an Electrofrog turnout. So, the best of both worlds in one unit! Specification Exit Angle: 24 Degrees Radius: 610mm

Peco ST-400 Starter Track Set | OO9 GaugeFor narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track. This rigid track system is particularly useful on small layouts with tight curves, and is fully compatible with the 009 Streamline track system.Specifications Frog Angle: 45 Degrees Radius: 228mm Contains 6 x ST-401 Standard Straights 2 x ST-411 Double Straights 1 x ST-413 Double Straight (Wired) 5 x ST-403 1st Radius Standard Curves 6 x ST-412 1st radius Double Curves 1 x ST-405 Right Hand Turnout 1 x ST-406 Left Hand Turnout 2 x SL-440 Buffer Stops 1 x OO-9 Planbook Recommended To Be Used WithPECO 009 Code 80 Setrack system

Contents; 7 x No.2 Rad Dble.Curve. ST-226. 2 x No.2 Rad. Std. Curve. ST-225. 5 x Double Straight. ST-201. 3 x Standard Straight. ST-200. 1 x Right Hand Turnout. ST-240. 1 x Left Hand Turnout. ST-241. 1 x Short Straight. ST-202. 2 x Buffer Stop, Sleeper Built. ST-270. 2 x Decoupling Unit. ST-271. 1 Pair Power Connecting Clips. ST-273. 2 x Buffer Stops. ST-270. 1 Planbook. STP-00.

The Peco ST-101 Starter Track Set 3rd Radius Curves expands the popular unit trackage system in OO/HO. Modellers can use this new set in two ways, either on its own as a larger circuit of track with two sidings, or combined with ST-100 2nd radius set to create a double track circuit with crossover (the new set has two right hand turnouts to create the crossover). For modellers who wish to move on from the train set, or those modellers who just need a simple quick and easy product to get another circuit of track in place, this set offers them a solution.

Peco N Gauge No 3 Radius Double Curve

N Gauge No 4 Radius Standard Curve

Peco N Gauge No 4 Radius Double Curve

PECO SETRACK OO/HO CODE 100 STANDARD STRAIGHT (PACK OF 8) PECO Setrack 00 Gauge Code 100 - Unit trackage System The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops. The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary. Recommended to be used with: PECO Setrack 00 Gauge Code 100 - Unit trackage System ST-280 Track Fixing nails STP-OO PECO Setrack Planbook

PECO SETRACK OO/HO CODE 100 DOUBLE STRAIGHT (PACK OF 8) PECO Setrack 00 Gauge Code 100 - Unit trackage System The high quality rigid unit trackage system suitable for all popular brands of 00 gauge model trains. Being fully compatible with the Code 100 PECO Streamline range, it need never be discarded as your layout develops. The solid nickel silver rails are integrally moulded into the sleeper bases for maximum realism and strength. Turnouts are fitted with an over-centre spring for immediate use, no extra levers necessary. Recommended to be used with: PECO Setrack 00 Gauge Code 100 - Unit trackage System ST-280 Track Fixing nails STP-OO PECO Setrack Planbook

Peco Short Straights (ST-202) 79mm each

Peco OO Pack of 4 ST-203 Special Short Straights ST-2003 Pack of 4 ST-203 special short straight track, length 41mm (1.5/8in.).