TAMIYA (943)

Tamiya Acrylic Paints are made from water-soluble acrylic resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Specification A black with a slight blue tint, great for recreating rubber tires on military subjects, road wheels and more! Contents: 10ml

Tamiya Color Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint. Ideal for hand brushing, these paints can also be used with an airbrush when thinned by adding 2 parts of thinner to 10 parts of paint. For best results use Tamiya Enamel Paint thinner.Important note: Never apply lacquer over enamel paints.

Tamiya Color Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint. Ideal for hand brushing, these paints can also be used with an airbrush when thinned by adding 2 parts of thinner to 10 parts of paint. For best results use Tamiya Enamel Paint thinner.Important note: Never apply lacquer over enamel paints.

The True Successor to the Mk.V The legendary Spitfire was the representative British fighter of WWII. Many variants were built and among these was the Mk.VIII, a variant developed to be the replacement for the RAF's previous mainstay Spitfire, the Mk.V. The Mk.VIII was fitted with a Rolls-Royce Merlin 60-series engine, larger radiators, and an air filter as standard. Other improvements included fuel tanks added in the wings, retractable tail wheel, shortened ailerons, and enlarged rudder and elevators. From the latter half of 1943, the Mk.VIII were deployed to the Mediterranean and Pacific Theaters and saw service with RAF, USAAF, RCAF, and RAAF units. Features Overall Length: 302mm, Overall Width: 383mm. Features of the Mk.VIII, including the retractable tail wheel, shortened ailerons, and wing fuel tanks, have all been accurately reproduced. You can select either retracted or deployed landing gear and tail wheel even after assembly. Parts to depict standard and extended wingtips included Features moveable ailerons, rudder, and elevators. Flaps can be depicted in either up or down position. Parts for 30 and 90 gallon fuel tanks included. Comes with 3 kinds of markings to depict the aircraft from USAAF, RAAF, and RCAF units. Comes with 2 pilot figures, 1 seated and 1 standing. Special Photographic Reference Manual Included In addition to the historical background of the Spitfire, this booklet includes photographs taken at museums where research on actual Spitfire aircraft was conducted. A5 size, 16 pages.

During the 1960's, the Japanese racing scene was striving to catch up with high performance racing machines of European origin. One manufacturer called Prince developed the first Japanese prototype racing machine, named the R380. With a powerful-in-line six-cylinder DOHC engine mounted amidships under a low and sleek body, the R380 won the 1996 Japanese Grand Prix race event and earned various world speed records in the following year. The PRINCE company merged with Nissan and unveiled a special 4-door sedan Skyline model during the 1968 Tokyo Motor Show. Priced at almost double that of other Skylines in the stable, it was transplanted with a de-tuned powerplant of the R380 racer's unit. This hot-blooded Skyline was launched into the market in February 1969, under the designation of GT-R. The 1,989cc DOHC 6-cylinder S20 type engine yielded 160hp of maximum output. In October 1970, the original 4-door sedan GT-R was replaced with a sportier, 2-door hard-top model. Its designation "R" stood for racing, the Skyline GT-R virtually dominated Japanese racing circuits from the late 60's to early 70's. The 4-door and 2-door Skyline 2000 GT-Rs accomplished 50 respectable victories in domestic races during that period, setting up the famous "GT-R legend" among the Japanese motor racing enthusiasts. Features This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 73mm. The boxy 2-door coupe design is captured in style. Metal-plated parts are used for the front grille, bumpers, wiper arms and more. An optional trunk spoiler is also included. The interior includes recreations of bucket seats and the 3-spoke steering wheel. Features a detailed depiction of the S20 inline-6 engine. Underside details include renderings of front strut and rear semi-trailing arm suspension, muffler sections and more. Recreations of 14-inch steel wheels are joined by solid treaded tires. Decals are included for instrumentation, emblems and more.

Features These block tires feature two different types of grip pattern in a high-grip compound.  Great for use on hard-packed off-road surfaces.  Internal diameter: 62mm, width: 35mm.

U.S. Light Tank M5A1 Stuart Specification Number:32606 Scale: 1:48 Type: Full kit

Tamiya classic car R/C replicas are a fan favorite! This assembly kit recreates another 1990’s era favorite with the addition of the Toyota Celica GT-FOUR (ST205) on our easy to assemble and drive TT-02 chassis. Toyota developed this high-spec version of the sixth generation Celica with the aim of repeating in 1994 their global rally championship of the previous year. It possessed curved, aerodynamic body lines, a distinctive front with four headlights of different sizes, and a 2-liter 4-cylinder DOHC turbo engine capable of 255hp. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior traction. Also, 2,100 Japanese models featuring an arched rear spoiler were produced to the acclaim of Celica fans. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels use semi-pneumatic treaded tires. Features 1/10 scale R/C model assembly kit. Length: 451mm, width: 186mm, height: 134mm. Wheelbase: 257mm. Durable 1.0mm-thick polycarbonate body. The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability. 10-spoke wheels molded in Gun Metal are paired with tread pattern racing radial tires. Comes with stickers and window masking stickers for use in the paint job. Includes 540 brushed motor and ESC. Requires 2-channel radio servo 7.2-7.4volt battery with compatible charger Tamiya PS paints

Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out minute details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. Features Bottle contents: 10ml. A dedicated Tamiya Lacquer thinner is available. Note: Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name. LP-84 Camouflage Gray recreates the distinctive fuselage color called “Have Glass V” of the F-35. When thinning lacquer-based paints or cleaning painting tools and airbrushes, you can use Item 82110 (LP-10 Lacquer Thinner (10ml)) and Item 87077 (Tamiya Lacquer Thinner (250ml).

The iconic Porsche 911 RSR 2.8 makes its way to the highly versatile BT-01 chassis! To faithfully recreate the motor and drive train layout as much as possible of the full-size car, this kit instructs the builder to assemble the chassis in the short wheelbase, midship rear motor / rear wheel drive (MR) setup. This layout configuration provides rear wheel drive handling excitement at every turn and exciting throttle response. The Porsche 911 RSR 2.8 The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories. BT-01 Chassis The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the centre frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ese of assembly and effective maintenance. Features 1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm. Wheelbase: 251mm. (Short) The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate. Silver color wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547). Separate molded plastic part recreates the side mirror. Includes 540 brushed motor and ESC. Requires 2-channel radio Steering servo 7.2-7.4volt battery with compatible charger Polycarbinate Paint for Body Shell

Tamiya 9005719 - Tamiya D Parts for TT-01 / TT01

24369 1/24 Honda City Turbo (with Honda Motocompo) Specification Number: 24369 Scale: 1:24 Type: Full kit

This model kit recreates the state-of-the-art F-35B Lightning II in easy to manage and display 1/72 scale. It inherits many of the detailed features first seen in our 1/48 scale release. Thanks to extensive research of the full-size subject, the B variant of the Lockheed Martin F-35 Lightning II model is poised to be the definitive model in 1/72 scale! Developed under the Joint Strike Fighter (JSF) program , the F-35 integrates multiple functions into its design and there are three types: the F-35A conventional takeoff and landing (CTOL) aircraft, the F-35B short takeoff, vertical landing (STOVL), and the F-35C carrier takeoff and landing (CV). The F-35B was developed as a successor of the AV- 8B Harrier II. The F-35B is recognized as the aircraft which accomplished both supersonic flight and STOVL by the 3-bearing engine duct nozzle and lift fan, and following the F-35A, the F-35B deployment started in 2015. The first F-35B to see action was an aircraft belonging to the U.S. Marine Corps VMFA-211 “Wake Island Avengers” in Afghanistan, in September 2018. Not only the U.S. and the U.K. but also Italy employs the F-35B. The Japan Air Self-Defense Force also plans to launch a new fighter squadron with the F-35B from 2024 onward. As the F-35B can be operated from both aircraft carriers and airfields featuring short runways, many countries are considering its deployment, and the F-35B looks set to become a significant presence in the skies across the world. The F-35 Lightning II is an ambitious 5th Generation aircraft that aims to meet the needs of different U.S. service arms via three different variants, perhaps the most adventurous of which is the F-35B which combines extremely low observability and exceptional situational awareness with short takeoff and vertical landing (STOVL) capability facilitated by a lift fan positioned between the engine and cockpit, that lets it operate from smaller confines such as amphibious assault ships, light aircraft carriers and airfields with limited runway space. Its deployment is planned not only by the U.S. Marine Corps, but also by U.K. and Italian air arms. Get a close look at what makes this fascinating aircraft tick with our detailed and accurate model in the manageable 1/72 scale. Features 1/72 scale plastic model assembly kit. Wingspan: 148mm, fuselage length: 215mm. The kit recreates the vertical landing and can be assembled in two ways; landed or hovering and ensures superior assembly with dedicated angled door parts. The parts faithfully depict a hovering aircraft with downward engine nozzle and opened doors. Features realistic renderings of half-open two inner weapon bay doors and interior details such as ribs and pipes. The nose landing gear and main landing gear can be depicted as extended (for hovering) or retracted (for landing). The lift fan is integrated with nose landing gear bay, and the variable vane underneath is recreated in detail. Shorter than on the F-35A, the engine nozzle is recreated by a single part. The 3BSM (3 Bearing Swivel Module) is faithfully recreated with a dedicated parts breakdown for this kit. RAM (Radar Absorbent Material) are molded into fuselage surfaces. Clear parts recreate canopy and EOTS fairing under the nose. Includes parts for AIM-9X Sidewinder x2 and AIM-120C AMRAAM x2. Y-shaped air intake duct for highly advanced stealth characteristics. Detailed cockpit, landing gear bays and roll posts. Martin-Baker US16E ejection seat. RCS (radar cross section) enhancers affixed to top and bottom sections during basic training exercises. One pilot figure with the helmet mounted display (HMD). A stand is included to use if you are making a hovering model. Comes with 5 marking options from a total of three countries (United States Marine Corps, Royal Air Force, Italian Navy). Includes masking stickers and a painting guide.

This is the M Parts (Damper Stay) for the TRF201 Chassis Kit. M Parts x 1pc.

Tamiya Ap Drive Belt Bag : 16041 (19804787)