Armour Vehicle Kits (350)

The latest addition to the small yet perfectly formed 1/48 Military Miniature Series of kits depicts a Japan Ground Self Defense Force Light Armored Vehicle. It depicts the vehicle in domestic spec, which features upgrades from the model used in the Iraq Humanitarian Assistance Unit. Comes with a driver figure in bullet-proof jacket. Decals and parts to depict 3 different marking options are included. The model can be assembled with top hatch open or closed.

Simulating Zimmerit on military models using putty enhances the model's presence but at the same time it requires advanced skills, and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 32584 1/48 scale German Panzerkampfwagen IV Ausf.H Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved. Contains Zimmerit Sticker Sheet x1 Use in conjunction with Item 32584 1/48 scale German Panzerkampfwagen IV Ausf.H Late Production.

In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improve captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed the 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter.  Features 1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III. Overall length: 174mm Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction. All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated. Protective armor and sighting equipment moves with raising and lowering of main gun. Crew seats and large clamp for main gun can be modeled in the fighting or moving positions. Two crew figures are included in set. Five kinds of battlefield markings are included.  

With over 70,000 produced between 1937 and 1944, the 3ton 4x2 German cargo truck was a vital cog in the operations of WWII German forces. It featured a simple rear wheel-drive chassis with a 68hp engine, which enabled a maximum on-road speed of 85km/h and a range of 320km. Such performance, coupled with its superb load-carrying capacity and reliability, saw this invaluable truck supplied to units on all fronts and hauling vital supplies and fuel.Precision plastic assembly model kit. Paint and glue not included. Requires assembly and painting. For intermediate to advanced skill modellers.

Tamiya's Maiden WWI Figure Set British infantry in WWI were issued with Pattern 1902 uniform and Pattern 1908 webbing to be worn over the top. Both were manufactured in khaki for camouflage reasons. On their lower legs, infantrymen wore puttees and officers leggings. From the middle of the conflict, steel helmets were distributed and often had canvas covers to reduce reflection. Features This set of 5 adaptable figures depicts British infantry from WWI in realistic pose, including an officer, machine gunner and 3 riflemen. Uniforms are also faithfully captured, as are accessories such as Lee Enfield rifles, Lewis machine guns, gas mask pouch, canteen and more. Rifles feature optional bayonet parts, while helmets can be attached with or without canvas cover. These figures are perfect for use with WWI models such as the WWI British Tank Mk.IV Male (w/Single Motor).

Tamiya 1/48 aircraft model kits sets the benchmark for high quality engineering and accuracy, and this series includes numerous famous aircraft from around the world. Modelers can choose from WWII piston-engined fighters all the way to the latest jets. Paint, tools and glue not included.

Japan's new homegrown MBT The Type 10 tank, commissioned in 2010, is the latest generation of tank used by the Japan Ground Self Defense Force (JGSDF). It features a new Japanese-made 120mm main gun, in addition to modular armor on the turret and hull to give the tank impressive defensive reliability. The small and compact tank features excellent maneuverability, while it is also compatible with the modern C4I network system. 2012, and at present the vehicle is largely being used for educational purposes at the JGSDF's Fuji School. It is seen as a natural replacement for the long-serving Type 74 tank. Features This is a plastic model assembly kit of the Japan Ground Self Defense Force Type 10 Tank. 1/35 Scale. Length: 273mm, Width: 95mm. Exhaustive research of the real tank was facilitated by the cooperation of the JGSDF, leading to a highly accurate recreation of the Type 10's form. Modern turret with modular armor is faithfully recreated. The hull features excellent attention to detail, including a realistic non-slip surface texture. Shape of the flowing rubber side skirts is depicted with realism. Comes with belt-type tracks, plus commander and gunner figures and 3 sets of markings including those to recreate a JGSDF Fuji School Type 10 Armored Division Type 10.

Tamiya is famous for its series of Military Miniature model kits in exact 1/35 scale of military vehicles, plus figures in many poses from forces all over the world. Ideal for the constructing of diorama and shadow box art, these military miniature models are exact in detail, down to the facial expressions on the soldiers themselves. Paint, tools and glue not included.

Prowling ArmorInitial encounters with the T-34 in 1941 were something of a shock to invading German troops, who had until that point experienced general success with their armored forces. Their response was the Panther, first fielded in 1943. The Ausf.G (Type G) variant followed on from Ausf.D and Ausf.A Panthers; debuting in March 1944, it featured sloped armor, a powerful 700hp Maybach HL-230 engine and a fearsome 75mm gun - all that added up to an imposing combination of firepower, mobility and survivability which proved a boon for German forces and something of a headache for the Allies. Features This is a 1/35 scale plastic model assembly kit. Length: 256mm, width: 96mm. An early production Ausf.G Panther is recreated, with realistic details such as turret and hull weld lines. Features plenty of accessories including depictions of spare track links. Turret rear escape hatch is a moving component, and allows inspection of hull interior details such as gun breech. Commander, driver and radio operator hatches can be assembled open or closed. Suspension arms are separately molded parts. Features belt type tracks. Comes with a figure in overalls and four marking options in the box.

The Eyes of the German Army During the first half of WWII, German reconnaissance units relied greatly on the Sd.Kfz.231 series heavy armored car. It also came armed with a KwK30 20mm cannon and an MG34 machine gun mounted on its turret. The 8-wheel drive Sd.Kfz.232 had an on-road top speed of 90km/h, and a rear driving position to facilitate swift escape from threatening situations. Its most identifiable point was a large frame-type antenna mounted on the body. These 8-wheeled armored cars were deployed to armored reconnaissance battalions of Panzer divisions and served as the eyes of the German army from Europe and North Africa to the Russian front. Features 1/48 scale plastic model assembly kit of the German 8-Wheeled Heavy Armored Car Sd.Kfz.232. Length: 140mm, width: 50mm. The model accurately captures the original vehicle's angular form and large frame antenna. The frame antenna is attached to the pivot on top of the turret. For ease of construction, the complex suspension is recreated using a small number of parts. Includes torso figure of commander scouting the area ahead of the model, and 2 marking options. The then-cutting edge sloped armor has been precisely recreated in a compact 1/48 scale. The complex 8-wheel drive, independent 8-wheel suspension is replicated using a small number of parts, but without sacrificing Tamiya's trademark accuracy.

Simulating Zimmerit on military models using putty enhances the model"s presence but at the same time it requires advanced skills and is time consuming. This sticker sheet enables easy reproduction of Zimmerit on Item 32575 1/48 scale German Tiger I Late Production. By simply applying the stickers on the model and painting, a realistic Zimmerit effect can be achieved. To be used in conjunction with 1/48 German Tiger I Late Production (32575).This coating sheet can be used to recreate Zimmerit on the 1/48 scale German Tiger I Late Production. Simply cut out and stick onto your model to add a whole extra dimension of realism!

Design of the M48 series of medium tanks commenced in October 1950, with the Chrysler Corporation commissioned to do the design work and provide six prototypes. Due to the Korean war, production of the M48 was authorized prior to the completion of any prototype or testing. Ford and General Motors were awarded production contracts, in addition to Chrysler, and the first M48 was delivered in early 1953. Numerous technical problems with the new tank delayed its deployment in significant numbers until 1958. There are numerous variations and modifications of the M48 in existence all over the world today, and this kit depicts an M48A3 "Patton" as it appeared during the Vietnam conflict when employed by the U.S. Forces. Using a cast elliptical hull which has high structural rigidity and excellent ballistic protection, this 47.5 ton tank has proven its worth in the field of combat against like opposition. The major improvement of the M48 over the M47 was the superior shape of the "Turtleback" cast steel turret, which provided a greater internal volume and much better ballistic protection. Armed with a 90mm M41 gun and on 7.62 coaxial machine gun and a 12.7 machine gun in the commanders cupola, and powered by a Continental V-12 AV-1790 petrol engine of 865 hp, this fine tank has a top road speed of 48 km/h. It is crewed by a Commander, Gunner, Radio operator/loader and a driver. The M48 series of medium tanks is or has been used by a great number of nations around the world, and is expected to remain a first line battle tank for many years to come. The A3 series of the M-48 was the first to introduce the new AVDS-1970-2 diesel engine, which was a major improvement, and since its introduction many of the earlier Pattons have also been retrofitted with it. When used in Vietnam, secondary armament was often boosted by adding a .50 calibre machine gun above the cupola; a 7.62mm machine gun in front of the loaders hatch, and another 7.62mm MG in the mantlet in lieu of the telescopic sight. Early in its production the M-48 was fitted with a snorkeling kit which enables it to fork water obstacles up to 4.1 meters in depth. The M-48A3 uses a coincidence-type range finder for sighting its main 90mm gun. Range data from this sight is fed into a ballistic computer for very accurate and speedy target acquisition. Maximum road speed of the M-48A3 was 48km/h. Maximum range was 460 km, and the maximum road gradient was 60%. The A3 carried 62 rounds of 90mm ammunition, and up to 5900 rounds for the 7.62 MG's. The A-3 model can be seen with either 3 or 5 wheel track bogies, and the majority used in Vietnam had five bogies, due to the jungle type of terrain encountered. Tank crew members often built up the sides of the turret with extra padding and equipment for additional protection from hostile fire. A great many of the existing M-48 tanks around the world are now being up graded to M-60 standards with the addition of the 105mm gun in place of the 90mm main unit. This is a 1/35 scale plastic model kit of the American M48A3 Patton tank, which served with distinction during the Vietnam War. Features The tough appearance of the tank, including its cast metal surface texture and canvas section of the gun mantlet is accurately reproduced. Details such as the searchlight and machine gun cupola are also brimming with realism. The kit includes accessory parts such as an engine exhaust snorkel, jerry cans, and spare track links as well as 2 tank crew figures.

Old Tank, New Gun During the 1960s, the Israeli Defense Forces upgraded their M4A1 Sherman tanks by equipping them with the powerful French 105mm CN-105-F1 tank gun and they were redesignated as M51s. A muzzle brake was installed to minimize the greater recoil effect and a large counterweight was fitted to the rear of the turret to offset the long barrel. The 460hp diesel engine and the combination of the Horizontal Volute Spring Suspension (HVSS) and wider T80 tracks gave the M51 improved mobility. During the Six-Day War in 1967, the M51s were used against newer T-54/55 tanks as well as JS-3 tanks from Egyptian, Iraqi, and Syrian armies and proved their superiority. Features 1/35 scale plastic assembly kit of the M51. Length: 257mm, Width: 86mm. Distinctive form of the tank is accurately reproduced based on a thorough study of an actual museum example. The cast turret has rich finish. Realistic HVSS suspension and T80 tracks. Commander & loader figures, plus 3 types of marking options included. The model is accurately reproduced based on the thorough study of an actual example at The Armored Corps Memorial Site and Museum at Latrun, Israel. The tank's imposing form including the turret with large counterweight has been accurately reproduced. Commander and loader figures provide a great scale presence. Note the realistic surface texture of the mantlet. The complicated shape of the muzzle brake is faithfully rendered. HVSS is detailed and yet not overly complex and belt-type tracks enable easy assembly.

The Sd.Kfz.222 was a 4WD armored car used by the German army for reconnaissance duties. It was well-armed with a 20mm cannon and a machine gun in its open turret, which was protected from grenades and fragments by metal mesh covers. Powered by a 90hp liquid-cooled engine mounted in the rear, it was capable of a maximum road speed of 70km/h and maximum cross-country speed of 40km/h. The famous Field Marshal Erwin Rommel's Afrika Korps used these armored cars in the North African desert for scouting and offensive operations, together with the DKW NZ350 motorcycle. Features Angular shape of the armored car accurately reproduced, complete with tool case and headlight details. Precision-made photo-etched parts for the turret mesh covers and aluminum 20mm cannon barrel are included for enhanced detail. 3 types of markings included to depict units in North Africa. DKW NZ350 motorcycle is authentically recreated.

Tamiya is famous for its series of Military Miniature model kits in exact 1/35 scale of military vehicles, plus figures in many poses from forces all over the world. Ideal for the constructing of diorama and shadow box art, these military miniature models are exact in detail, down to the facial expressions on the soldiers themselves. Paint, tools and glue not included.

This is Tamiya 1/35 Military Miniature German Kubelwagen Type 82 Africa Corps Scale Model Kit. In February of 1936, Dr. Ferdinand Porsche designed a civilian car for use on the German Autobahn. Surprisingly, almost none of these cars were made available to private citizens. The Wehrmacht began secretly appropriating these vehicles for military use. In January 1938, the Wehrmacht presented Dr. Porsche with the specifications for a military version. That November, the prototype was completed and designated the Pkw. K1 (VW-Kubelwagen). The Kubelwagen Type 82 was equipped with a lightweight monocoque body on a torsion bar spring based four wheel independent suspension. Its powerplant consisted of an air-cooled four cylinder 985cc engine, which outputted 23.5hp. Its tremendous performance led to its wide use as a communications vehicle by Wehrmacht units. Because of its reliability and ease of repair, and since its engine did not require a coolant, the Kubelwagen proved particulary effective in North Africa. At the request of various divisions in North Africa for a vehicle suitable for the desert, a Continental balloon tire equipped version went into production from 1942. Two types of balloon tires, a grooved and an ungrooved version were used. Because the tires were wider than normal tires, a spacer to raise the height of a spare tire attachment was added to the hood of the car. Some of the balloon tire equipped Type 82 were even used in Italy after the fighting in North Africa stopped in May of 1943. Including variations, about 51,000 Kubelwagen Type 82 were produced by the end of the war. Features Realistically reproduced hooks,fornt hoods adn rear panel Wode-tread balloon tires Lifelike Figure Included

Popularly known as the "Boxer" because of its air-cooled flat-four square 4-cylinder engine, the L2 H43 was developed by the Krupp company and mass produced from 1933. This truck was capable of both personnel and light-artillery transport and featured unique 6x4 independent suspension with 4-wheel drive and was capable of speeds up to 70km/h. In 1936, this truck had its horse-power improved from 55hp to 60hp with the development of the L2H431 version. This latter version underwent various improvements, particularly those allowing it to tow a 3.7mm PAK 35/36 anti-tank gun. After this improvement, the L2H431 came to be known as the Protze, and could hold 1 driver and 5 artillery crew. From the start of WWII the Protze was employed as standard equipment in anti-tank artillery divisions and was actively deployed to battlefronts in France and Poland.

This 1/35 scale set will allow you to display the equipment seen loaded on modern U.S. military vehicles. In addition to individual equipment such as large and small Alice packs, sleeping bags, and sleeping mats, the set also includes a rich selection of 12.7mm and 40mm ammunition cases, jerry cans, and water tanks. Furthermore, the set also includes ration cartons and CIP (Combat Identification Panel) which can be attached to the U.S. Modern Utility Vehicle. This accessory set includes 25 types of equipment (total of 80 pieces) and is suitable for expanding your modern U.S. military diorama. It can be used with support vehicles and frontline tanks.  

This is a plastic assembly model kit which includes two German soldiers on bicycles. Separate parts to depict the bicycles' handles and pedals as well as detailed wheel spokes and seats provide the models with added realism. You can choose to assemble the soldier figures in either a standing or cycling pose. You will get much enjoyment from displaying your models on their own or as apart of a larger diorama. Tough Army Bikes German army adapted mechanisation prior to other armies and was proud of its great mobility during WWII. German forces also used bicycles in large quantities as a simple means of transport. Although, these military bicycles were produced by various bicycle makers, the basic parts were standardised in order to meet the demand and supply of spare parts. You will enjoy displaying these simple yet tough designed bicycles which came with a large rear luggage carrier and storage box that was attached to the main frame. Bicycle length: Approx. 55mm.

This is a 1/35 scale set of five British infantrymen which includes a squad leader, an ammunition loader, and riflemen who are cautiously carrying out a patrol. Set includes each squad member depicted in natural poses with realistic expressions. Accessories such as the Sten sub machine gun, Bren light machine gun, Enfield rifles, haverasacks, and back packs all have a fine finish.

During WWII, the German infantry were issued with the precise 8cm GrW 34 mortar. This plastic assembly model kit realistically depicts a German infantry mortar team about to fire the weapon with two soldiers holding it down, one loading it, and one yelling “fire!” The 8cm GrW 34 mortar can also be depicted in an unassembled state for when it is not in use. Parts to depict wooden and metal ammunition cases (two each), plus mortar shells further enrich the kit.

During WWII, over 800,000 2 1/2-ton 6x6 cargo trucks were produced and became a symbol of the American victory along with the Sherman tank and the Jeep. Among them was a troop carrier of which approximately 57,000 units were made. This is a plastic assembly model kit of one such truck. The highly durable and tough form has been precisely reproduced. Features such as the robust suspension and the split type differential have a rich detailed finish. The model depicts the doors which had canvas parts and its cargo area with the covers removed to allow you to recreate a commonly seen scene of WWII. Five kinds of markings and a seated driver figure are included.

This is a 1/35 scale plastic assembly kit of a WWII German tank crew reproduced in realistic relaxed poses. Set includes figures to depict two tank commanders, three tank crew, and an enlisted soldier, in 3 different types of uniform. This set is perfect to display in combination with a wide range of German tank models.

During WWII, the Germany army relied on drums and jerry cans to supply their units with gasoline and drinking water respectively which are depicted with this set. Features The drums feature the characteristic dual protective bands and a centrally located fuel receptacle used by the German army. Jerry cans are faithfully reproduced with their distinctively designed caps and centrally located engravings; designs with hand pumps and faucets are also included. Use this set as accessory parts to expand dioramas featuring German subjects.