dualsky (93)

This Dualsky 120E Tuning Combo with 5322C V2 380kv Motor and Summit Lite 130A ESC is compatible with 6S LiPo batteries and is designed for 1.20 - 1.40 4-stroke models (e.g. Sebart Mythos 125E). Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection.  

This Dualsky 15E Tuning Combo with 2814C V2 970kv Motor and Summit Lite 45A ESC is compatible with 3S-4S LiPo batteries and is designed for .10-.15 Class models. Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection. Specification Motor KV: 970 Turns: 7.5 Weight: 105 Dimensions: 35.2x34.2 Slots & Poles: 12N14P Ri (mOhm): 48.6 Io @ 10V (A): 1 No. of cells (LiPo): 3..4 Max Efficiency Current (A): 20 Max. Burst Current (15S)[A]: 33 Max. Power(15S)[W]: 400 Max. Torque [N*M]: 0.39 Shaft diameter (mm): 5 Mountingholes pitch: 19/19 Input Connectors: GC3.5 Recommended ESC: XC-45-LITE or XC4018BA Propeller: 3S: 11x7E, 12x6E 4S: 9x6E, 8x4E Class: .10-.15 Class ESC Dimensions (LxWxH): 66 x 25 x 10.7mm (w/o wire) Weight (w/ wire): 44g Number of Cells: 3S-6S LiPo, 11.1V-22.2V Continuous Current: 45A Burst Current: 70A Resistance (Ri) (mOhm): ~3.0 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 6A const./10A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default =125ms (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 14AWG, 150mm Wires to Motor: 16AWG, 80mm w/ DB3F Signal Wires: JR, 350mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky 15T Low Profile Servo Horn Set suits T6, T7 and T8 models.

This Dualsky 180 Tuning Combo with 2303C V2 1800kv Motor and Summit Lite 16A ESC is compatible with 2S-3S LiPo batteries and is designed for 100-150g airplanes (e.g. F3P or indoor freestyle). Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection.

This Dualsky 200H Tuning Combo with 2306C V2 2300kv Motor and Summit Lite 16A ESC is compatible with 2S-3S LiPo batteries and is designed for 200-300g aiplanes (e.g. Popular EPP profile planes). Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection.

Dualsky 22mm Folding Propeller Hub

Dualsky 25mm Folding Propeller Hub

Dualsky 25mm Folding Propeller spinner Replacement Cone

Dualsky spinner assembly to suit folding propellors on EP gliders. Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specification Diameter: 25 mm Motor Shaft: 3 mm Distance across hinge pins: 22 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 9.3 g

Dualsky spinner assembly to suit folding propellors on EP gliders. Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specification Diameter: 25 mm Motor Shaft: 5 mm Distance across hinge pins: 22 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 9.3 g

Dualsky spinner assembly to suit folding propellors on EP gliders. Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specification Diameter: 25 mm Motor Shaft: 6 mm Distance across hinge pins: 22 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 9.3 g

Dualsky 27mm Folding Propeller Hub

Dualsky 3.0mm Clamping Prop Adapter suit Folding Propeller

Dualsky 3.17mm Clamping Prop Adapter suit Folding Propeller

This Dualsky 300 Tuning Combo with 2308C V2 1180kv Motor and Summit Lite 22A ESC is compatible with 2S-3S LiPo batteries and is designed for 400-600g models, 300E class. Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection. Specification Motor KV: 1180 Slots & Poles: 12N14P Ri (mOhm): 128.5 Io@10V (A): 0.5 Efficiency Current (A): 12 Burst Current (15S) [W]: 20 Peak Power (15S) [A]: 240 Peak Torque [N*M]: 0.194 Battery: 2S or 3S LiPo Weight: 47 Dimensions (DxL): 28.8x24.9mm Shaft diameter: 3.175 Mounting holes: 16/16mm Input connectors: GC3.5 Reccomended propellers (2S): 11x6E, 10x8E Reccomended propellers (3S): 9x4.7SF, 9x6E Recommended ESC: XC-22-LITE or XC2512BA Application: 400-600g, 300E class ESC Dimensions (LxWxH): 44 x 23 x 7.2mm (w/o wire) Weight (w/ wire): 18.2g Number of Cells: 2S-4S LiPo, 7.4V-14.8V Continuous Current: 22A Burst Current: 40A Resistance (Ri) (mOhm): ~6.0 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 4A const./8A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default = Maximum (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 18AWG, 120mm Wires to Motor: 20AWG, 70mm w/ DB2F Signal Wires: JR, 200mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky 30E Tuning Combo with 2826C V2 850kv Motor and Summit Lite 45A ESC is compatible with 3S-4S LiPo batteries and is designed for .25-.32 (30E) Class (e.g. Extreme Flight 48inch airplanes.) Features Includes new generation Summit Lite ESC Selectable rotation direction Program the ESC using the Dualsky USB Link Multi Purpose (DSB22382, sold separately) Integrated high-current UBEC with excellent peak performance Low voltage, overheat, throttle, current, and low RPM protection.

Dualsky 30mm Folding Propeller Spinner Replacement Cone

Dualsky spinner assembly to suit folding propellors on EP gliders.  Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specification Diameter: 30 mm Motor Shaft: 3 mm Distance across hinge pins: 25 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 10.6 g

Dualsky spinner assembly to suit folding propellors on EP gliders.  Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specification Diameter: 30 mm Motor Shaft: 4 mm Distance across hinge pins: 25 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 10.6 g

Dualsky 32mm Folding Propeller Hub

Dualsky 32mm Folding Propeller spinner Replacement Cone

Dualsky spinner assembly to suit folding propellors on EP gliders. Dualsky spinner assembly to suit folding propellors on EP gliders. Designed in the Czech Republic, this light but very strong assembly is suitable for most electric powered gliders including F5J, eRES and F5K. The tapered collet clamping cone is easy to fit and very secure. The angled, z style propeller hub allows for a very streamlined effect when the blades (we recommend Aeronaut CAM or CAM Z) fold back. Available in a number of different diameters and to suit most motor shaft sizes. It is supplied with a rubber ring of the appropriate diameter to assist the blades to fold back when the motor stops. Features Suitable for most electric-powered gliders including F5J, eRES and F5K Angled, z-style propeller hub Supplied with a rubber ring Specifications Diameter: 32 mm Motor Shaft: 3 mm Distance across hinge pins: 27 mm Prop hinge pin diameter: 3 mm Prop blade root width: 8 mm Weight: 12 g

Dualsky 38mm Folding Propeller spinner Replacement Cone