e-flite (287)

Replacement Fuselage for the E-flite Gee Bee R-2 Racer 1.0m RC airplane. Contents Fuselage 1 Fuselage Lower Rudder Mount 1 Rudder Center Hinge, installed 1 Rudder Center Hinge Securing Screws M2 x 8mm Button Head Self- Tapping, installed 2 Canopy, installed 1 Pilot, installed 1 Battery Tray, installed 1 Battery Strap, installed 1 Rudder/Elevator Servo Tray, installed 1 ESC Mounting Strap, installed 1 Aileron Servo Lead Connected to the Hands-free Plate, installed 1 Hands-Free 1x1 Plate, installed 1 Hands-Free Securing Screws M2 x 8mm Flathead Self-Tapping, installed 2 Dummy Engine with Mounting Screws M2.5 x 8 Button Head Self-Tapping, installed 6 Rudder Pushrod with Z-Bend 1 Elevator Pushrod with Z-Bend 1 Pushrod Clevis 2 Pushrod Clevis Retainers 2 Horizontal Stabilizer Mounting Screws M3 x 70mm Flathead Self-Tapping

Fuselage Battery Hatch for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet.

The E-flite® UMX™ Viper Fuselage Rear Cover is a replacement designed for use on the E-flite UMX Viper 30mm EDF Electric Jet. With factory-installed wiring and an LED light, this cover offers simple drop-in installation right out of the package.

The E-flite UMX™ Viper Fuselage is a replacement fuselage intended for use on the E-flite UMX™ Viper Electric Jet. Featuring a pre-assembled design, this fuselage is factory-painted and includes a battery strap and a hands-free connector, making installation quick and simple.

Painted Fuselage with rudder LED wire installed.

The E-flite Timber 10th Anniversary Edition Fuselage is a replacement designed for the E-flite Timber 1.5m 10th Anniversary Edition Electric Airplane. This fuselage is complete with LED lights, battery straps, wing mounts, a receiver mount, landing gear mount, and the bottom access cover all pre-installed for simple installation.

E-flite V1200 V2 Fuselage. This is a replacement intended for the V1200 V2 aircraft.

Gear Door Set for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet.  Contents 1 Left Nose Gear Doors 1 Right Nose Gear Doors 2 Nose Gear Doors Guide Rod 2 Nose Gear Door Actuator Arms with Mount 2 Nose Gear Door Pushrods 2 Nose Gear Door Springs 1 Right Main Landing Gear Doors 1 Left Main Landing Gear Doors 2 ST2X6 Self-Tapping Screws

The E-flite® Gee Bee R-2 1.0m is a scale replica of one of the most unique and recognizable aircraft designs of all time! It offers incredible scale detail, modern conveniences, features, and technologies to deliver a flying experience you simply can’t get with any other model. Gee Bee aircraft were among the pioneering racing airplanes that captivated just about everyone during aviation's Golden Age. Their cutting-edge, teardrop-shaped designs, coupled with small wings, required a skillful hand to fly well, but with the right pilot, they dominated the racecourse. The E-flite® Gee Bee R-2 1.0m is a faithful replica of the iconic aircraft, featuring an abundance of scale detail along with modern features and technologies to deliver an unmatched flying experience. It assembles quickly and is sized to be easily stored and transported without disassembly. The Bind-N-Fly® Basic version is equipped with enhanced AS3X+® technology that smooths out the effects of wind and turbulence like never before, plus optional-use SAFE® Select technology that makes it easier to fly. Both versions include Spektrum digital, metal-geared servos, a 70A Smart Lite ESC, and a 4S-compatible motor. Aviation history produced few designs as unique and recognizable as the Gee Bee R-2, yet RC modelers rarely get the chance to fly one. The E-flite® Gee Bee R-2 1.0m is a conveniently sized replica that offers incredible scale detail, modern conveniences, features, and technologies to deliver a truly unmatched flying experience! It's capable of fast and smooth flying at speeds of up to 100 MPH in a dive, along with a variety of aerobatics, and has unexpectedly stable slow-speed handling that makes it easier and more enjoyable for intermediate to experienced pilots to fly. It features an authentic outline and an abundance of scale details, including molded-in panel lines, a simulated radial engine, flying wires, and a pilot figure. Functional features include shock-absorbing landing gear and wheels specifically designed to make it easier to land, along with a steerable tailwheel. The one-piece wing includes hands-free connections, yet the Gee Bee 1.0m is sized to be easy to store and transport without disassembly. The factory-installed digital and metal-geared servos provide precise and reliable control at every speed. The power system includes a Spektrum™ outrunner motor and an Avian™ 70-amp Smart Lite ESC, which are compatible with popular 4S 3200-5000mAh batteries. The Bind-N-Fly® Basic version is also equipped with a factory-installed Spektrum AR631+ receiver featuring exclusive and enhanced AS3X+, along with optional-use SAFE Select technologies to provide you with the outstanding control you always wanted but never thought possible in a Gee Bee model. And it all adds up to deliver a model that's a dream to fly while offering an exciting and incredibly unique scale flight experience. Features An abundance of scale details, including molded-in panel lines, a simulated radial engine, flying wires, and a pilot figure The 70-amp Spektrum Avian Smart Lite ESC provides real-time battery voltage, current, RPM, and other data via compatible receivers and transmitters The unmatched stability and locked-in feel of exclusive and enhanced AS3X+ technology Optional-use motor reversing for special ground handling and other capabilities Receiver loaded with a Smart Transmitter Model File that allows you to import all settings for NX and iX series transmitters during the binding process Large and convenient top-mounted hatch provides easy access to the battery Fast and easy bolt-together assembly – no glue or special tools required Skill Level 2 – Some Experience Required Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up, and fly similar class models. You should have the experience and skills necessary to successfully fly models like the E-flite T-28 Trojan 1.1m, Sportix 1.1m, Commander mPd 1.4m, or other similar class models before attempting to fly the Gee Bee R-2 1.0m BNF Basic version. Exclusive Technologies The BNF Basic version Gee Bee R-2 1.0m is equipped with a factory-installed Spektrum AR631+ receiver that features exclusive Spektrum AS3X+ and SAFE Select technologies. Enhanced AS3X+ works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch! If you don't want to enable the SAFE Select features, simply bind the receiver normally, and only AS3X+ will be active. The receiver is also loaded with a Smart Transmitter File (STF) that allows you to import all the settings for NX and iX series transmitters during the binding process so you can be flying in less time than ever before! The BNF Basic version Gee Bee R-2 1.0m is equipped with a factory-installed Spektrum AR631+ receiver that features exclusive Spektrum AS3X+ and SAFE Select technologies. Enhanced AS3X+ works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch! If you don't want to enable the SAFE Select features, simply bind the receiver normally, and only AS3X+ will be active. The receiver is also loaded with a Smart Transmitter File (STF) that allows you to import all the settings for NX and iX series transmitters during the binding process so you can be flying in less time than ever before! Bind-N-Fly® Completion Level Advantage Already own a Spektrum™ transmitter? Bind-N-Fly (BNF) aircraft make getting into the air quickly and with the best control experience possible easier than ever. They come out of the box with the power system, servos, and a Spektrum 2.4GHz receiver installed, so all you need to do is bind the receiver to a compatible transmitter, finish any final assembly, and fly! Smart Transmitter File This BNF aircraft is equipped with a receiver that is loaded with a Smart Transmitter File (STF) that makes programming your transmitter as easy as a few clicks of a button. When you bind your transmitter to an STF-equipped aircraft, all programming parameters download automatically from the receiver. Switch assignments, rates, expo, telemetry, and voice callouts configure themselves. No lengthy step-by-step instructions. No continual adjustments. Just push-button convenience that gets you flying faster. Smart Technology The Gee Bee R-2 1.0m features an exclusive Spektrum Avian Smart Lite ESC, which delivers real-time telemetry data directly to your transmitter. This advanced ESC monitors motor RPM, current, battery voltage, and more while you fly. The telemetry works with both Smart and non-Smart batteries through compatible receivers, such as the AR631+ and Spektrum AirWare equipped transmitters (including the DX6e, DX8e, DX6 G2/3, DX8 G2, DX9, NX6-20, iX12-20, and others). Flexible Power The factory-installed Spektrum brushless outrunner motor is 4S compatible, delivering excellent performance worthy of the original racer, including top speeds upwards of 100 MPH in a dive. The convenient top-mounted and magnetically secured hatch makes it easy to install and remove popular 3200–5000mAh batteries. Abundant Scale Detail Abundant scale details bring this Gee Bee replica to life, including molded-in panel lines, a simulated radial engine, flying wires, a pilot figure, and more. Durable Precision Composite materials reinforce the lightweight yet durable EPO airframe for added strength. The factory-installed digital and metal-geared servos deliver reliable and precise control at every speed to perform fast and aerobatic flying with confidence. Easy Assembly No glue or special tools are required for final assembly, so you can have the Gee Bee R-2 1.0m ready to fly in less time than it takes to charge a battery! Plus, its convenient size allows it to fit fully assembled in almost any vehicle for easy transport and storage. Contents E-flite Gee Bee R-2 1.0m with: Spektrum Brushless Outrunner Motor (installed) Spektrum Digital, Metal-Geared Servos (installed) Spektrum Avian 70-Amp Smart Lite Brushless ESC (installed) Spektrum AR631+ 6-Channel Receiver with AS3X+ and SAFE Select (installed) Product Manual Requires Full-range 4–5+ channel Spektrum DSMX/DSM2 compatible transmitter 4S 14.8V 3200–5000mAh LiPo with EC3 or IC3 Connector Compatible LiPo charger

The E-flite® Habu STS 70mm EDF is the easiest to fly RC jet EVER. Featuring exclusive SAFE® technology with Beginner, Intermediate and Experienced flight modes, it's the ONLY jet new pilots can succeed with as their first ever RC plane! YOU CAN FLY A JET! Nearly everyone who sees a radio controlled (RC) jet tear across the sky has the same reaction: "I want to fly one of those!" But because of their speed and handling challenges, RC jets have been almost impossible for first-time or low-time RC pilots to fly successfully — until now. Thanks to the E-flite® Habu STS (Smart Trainer with SAFE®) 70mm EDF jet, you can actually learn to fly RC airplanes successfully with a jet! The Habu STS 70mm EDF is based on the legendary Habu, one of the best high-performance Electric Ducted Fan (EDF) sport jet platforms ever created. E-flite® engineers optimized the design to improve its low-speed handling and slow speed performance and added options for taking advantage of exclusive Spektrum™ SAFE® flight assistance technology. As a result, the Habu STS 70mm EDF is the easiest to fly RC jet EVER, and the perfect choice to satisfy any RC pilot's desire to fly a jet! OPTIMIZED FOR EASY FLIGHT Engineered for improved low speed handling and performance to make flying and landings easier, the E-flite® Habu STS (Smart Trainer with SAFE®) 70mm EDF makes it possible to succeed in learning to fly with a jet as your first ever radio controlled (RC) airplane! Based on one of the best Electric Ducted Fan (EDF) sport jets ever designed, it's been optimized with the addition of SAFE® (Sensor Assisted Flight Envelope) technology featuring Beginner, Intermediate and Experienced flight modes to make it easy to fly successfully, especially with the help of an instructor. Wide-stance tricycle landing gear with a steerable nose wheel and oversized tires allows for takeoffs and landings on surfaces ranging from paved runways to grass and even dirt, plus you can install the optional Landing Assist Sensor (LAS) that automatically "flares" for smoother landings to make learning to land even easier! Best of all, the durable EPO airframe assembles quickly and easily without the need for glue or special tools — which means you can be ready to fly in less time than it takes to charge a battery. This Ready-To-Fly (RTF) Basic version includes everything needed to fly in one box except for a battery and charger. This allows you to choose a convenient and money-saving Spektrum™ Powerstage™ bundle or the separate battery and charger you prefer! The powerful brushless power system including a telemetry-capable ESC and the servos are all factory-installed. Plus the included Spektrum DXS 2.4GHz transmitter can be used with other Bind-N-Fly® (BNF) and BNF Basic aircraft after you learn to fly the Habu STS successfully! And the fun doesn't stop after you learn how to fly! In the Experienced Mode, the Habu STS 70mm EDF is capable of performing aerobatic maneuvers including loops, rolls, inverted (upside down) flight and more. You can use a 3S 3200mAh to 4000mAh battery for an excellent balance of power and flight time, or you can install a compatible 4S battery for more speed and thrust without the need for any modifications or upgrades! You can also purchase the RealFlight® Trainer Edition RC Flight Simulator and a Spektrum WS2000 Wireless Simulator Dongle (both sold separately) to fly this and other models using the transmitter included with the RTF Basic version! The simulator features six popular Horizon Hobby® trainer aircraft, including the Habu STS 70mm EDF jet, and built-in Virtual Flight Instructor lessons. This helps new pilots learn to fly successfully by practicing on a PC at home or on a laptop just about anywhere else! Ready-To-Fly Basic Flexibility This Ready-To-Fly (RTF) Basic version includes a Spektrum™ DXS controller/transmitter equipped with industry-leading DSMX® 2.4GHz technology and everything else you need to fly except for a rechargeable lithium polymer battery and charger for the airplane. The convenient and money-saving Spektrum™ Powerstage 3 bundle (SPMXPSA300) includes a compatible 3S 4000mAh Smart G2 LiPo battery and an S120 USB-C Smart charger that can be used with a variety of USB power sources. Or you can choose the separate 3S or 4S 3200–4000mAh battery and compatible charger you prefer! Uniquely Optimized Jets are typically faster and harder to fly than most of their prop-driven counterparts, which made it impossible for first-time, and even low-time, RC pilots to fly them – until now! The unique and optimized airframe design of the Habu STS improves low speed handling and slow speed performance to finally make it possible to learn to fly radio controlled (RC) airplanes successfully with a jet. High Power The factory-installed brushless power system features a 70-amp telemetry-capable ESC plus a specially-tuned motor and 10-blade 70mm fan that delivers an abundance of thrust with a 3S LiPo battery, or more power and speed with a 4S battery without the need for any modifications or upgrades. Durable Design Construction with advanced EPO material delivers a lightweight yet durable airframe that's tough enough to handle everyday flying punishment without getting bent out of shape. And in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement parts is readily available. Easy Assembly The Habu STS 70mm EDF arrives mostly factory-assembled with the power system, servos plus the flight controller and receiver installed. All you need to do is finish some quick and easy final assembly, without the use of glue or special tools, and you'll be ready to fly in less time than it takes to charge a battery! Capable Gear The wide-stance tricycle landing gear with a steerable nose wheel and oversized tires offers improved ground handling for easier take offs and landings on a wide variety of surfaces from paved runways to grass and even dirt. Flight School Qualifying Trainer This trainer model qualifies for use in the Horizon Hobby Flight School. As a trainer, this plane needs minimal preparation to be flight-ready. It also includes SAFE® (Sensor Assisted Flight Envelope) technology to help new pilots control their models. Purchase this item along with a three-month AMA trial membership to get started. Features Unique and optimized airframe design improves low speed handling and slow speed performance, making it possible to learn to fly radio-controlled (RC) airplanes successfully with a jet Based on one of the best first and high-performance EDF (Electric Ducted Fan) jet platforms ever designed — the legendary Habu Equipped with exclusive SAFE® technology that helps prevent crashes and makes it easy to learn how to fly Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch Panic Recovery mode at the push of a button to prevent loss of control and crashes Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings Includes almost everything needed to fly except for a compatible LiPo battery and charger (sold separately) Use a 3S 3200-4000mAh battery for excellent performance overall, or a 4S battery for more power and speed Spektrum™ DXS controller/transmitter with industry-leading DSMX® 2.4GHz technology for reliable control without interference Spektrum flight controller and serial receiver with fly-by telemetry capability Powerful brushless electric power system with 70mm 10-blade fan 3S and 4S compatible 70-amp telemetry-capable ESC Five (5) factory-installed servos and linkages Oversized tires for operation from a variety of surfaces including grass Wide-stance tricycle landing gear with steerable nose wheel Quick and easy assembly — no glue or special tools required Lightweight yet strong and durable EPO construction Full line of replacement/spare parts available Practice flying this aircraft in the RealFlight® simulator (sold separately) Contents (1) E-flite® Habu STS 70mm EDF (1) Brushless Outrunner Motor (installed) (1) 70A Brushless ESC (installed) (5) Sub-Micro Servos (installed) (1) Spektrum™ 3230B Flight Controller (installed) (1) Spektrum 4650C Serial Receiver (installed) (1) Spektrum DXS DSMX® 2.4GHz Transmitter (1) Product Manual Requires (1) 3S 11.1V or 4S 14.8V 3200–4000mAh LiPo Battery with EC3™ or IC3® Connector* (1) Compatible LiPo Charger* *The recommended Spektrum™ Powerstage™ 3 bundle (SPMXPSA300) includes a compatible 3S 4000mAh Smart G2 LiPo battery and S120 USB-C Smart charger that can be used with a variety of USB power sources.

Inspired by one of the highest-performance EDF (Electric Ducted Fan) sport jet models ever designed – the iconic Habu 32x – the E-flite® Habu XS (eXtra Sport) 80mm EDF also features swept-back wing and stabilizer trailing edges to enhance the appearance and performance. The overall design, including the wing featuring leading edge extensions, was scaled up from the extremely popular Habu SS (Super Sport) 50mm and 70mm models to deliver incredible low-speed handling characteristics that make it easier to fly at slower speeds and to land. This makes it one of the best first-ever “full-house” jet models for low-time EDF pilots and one of the best-ever everyday sport jets for experienced pilots! Both versions are equipped with LED lights, shock-absorbing struts, and a power system that’s compatible with popular 6S 4000–7000mAh batteries and features a Spektrum Avian 130-amp Smart ESC with optional-use motor/thrust reversing. The BNF Basic version also includes a factory-installed AR637TA+ receiver that delivers real-time telemetry data along with the benefits of exclusive and expertly-tuned AS3X+ and SAFE Select technologies to make it quicker to get in the air – plus easier and more enjoyable to fly than other similar class models! Based on the legendary Habu design, the E-flite® Habu XS (eXtra Sport) 80mm EDF is a more powerful and capable “full-house” version of the popular Habu SS (Super Sport) 50mm and 70mm models. It has an extremely wide flight envelope that combines incredible low and high-speed performance plus aerobatic capability, making it an excellent choice for experienced and low-time jet pilots. At its core is a 6S compatible Spektrum brushless motor and Avian™ 130-amp Smart ESC matched to a 12-blade fan that works with the expertly engineered and optimized ducting to deliver an abundance of speed, thrust, and a turbine-like sound – without the need for “cheater” holes. It’s capable of level flight top speeds up to 120 MPH and has impressive vertical performance. Plus, it can fit batteries from 4000mAh up to 7000mAh to deliver class-leading flight times. No glue is required for assembly, and the factory-finished one-piece wing, separate one-piece stabilizers, and fuselage bolt together so the Habu XS can be ready to fly in almost no time. The lightweight, composite-reinforced EPO airframe is factory-finished in a premium, fully painted trim scheme, while the plastic-capped hatch edges and opening improve durability to prevent damage and paint chipping when installing/removing batteries. Eight factory-installed digital, metal-geared servos with ball-link equipped linkages, plus control surfaces with unique captured rod hinges, deliver crisp and precise control at every speed. Functional features include LED landing and navigation lights, extremely effective flaps, and electric retracts with shock-absorbing, trailing-link struts on the nose and main gear so you can easily fly from grass and other surfaces. Both versions include the factory-installed power system and servos. The BNF® Basic version also has a factory-installed Spektrum AR637TA+ receiver featuring enhanced AS3X+® and optional-use SAFE® Select technologies. When using compatible AirWare®-equipped transmitters, the receiver and Smart ESC supply overall battery voltage, current draw, motor RPM, and other telemetry data in real-time — with both Smart and non-Smart batteries. With a 7–8+ channel transmitter, you can also utilize the optional-use motor/thrust reversing to shorten rollouts after landing and for other unique ground handling capabilities. It all adds up to deliver a full-house and high-performance EDF jet experience unlike any other for low-time Features Spektrum AR637TA+ receiver with full-range telemetry and industry-leading DSMX technology Receiver loaded with a Smart Transmitter File (STF) that allows you to import all settings for NX and iX series transmitters during the binding process A more powerful and capable “full-house” version of the popular Habu SS (Super Sport) 50mm and 70mm models that offers “eXtra” speed and aerobatic capability Unique wing design delivers incredible low-speed handling and slow-speed performance that makes it one of the easiest to fly and land jets Inspired by one of the highest-performance EDF (Electric Ducted Fan) sport jet models ever designed – the iconic Habu 32x Excellent choice for a first full-house and high-performance jet model for low-time to experienced EDF pilots Expertly engineered and optimized ducting for incredibly efficient performance without “cheater” holes Extremely wide performance envelope and speed range, capable of level flight top speeds up to 120 MPH 12-blade 80mm fan delivers excellent top speed and vertical performance plus turbine-like sound Factory-installed 6S-compatible Spektrum brushless motor and Avian 130-amp Smart ESC Spektrum Avian Smart ESC provides real-time battery voltage, current draw, and other data – with Smart and non-Smart batteries – via compatible transmitters Fast and easy assembly – no glue required The unmatched stability and locked-in feel of exclusive and enhanced AS3X+ technology Easier to fly with innovative and optional-use SAFE Select flight envelope protection Optional-use motor/thrust reversing to help shorten rollout after landing and for other unique ground-handling capabilities Eight factory-installed digital, metal-geared servos with ball-link equipped linkages and control surfaces with captured rod hinges Reliable electric retracts with shock-absorbing, trailing-link struts for grass and other field operation Functional flaps for shorter takeoffs and landings, plus improved slow-flight performance LED navigation and landing lights for enhanced visibility and orientation Lightweight yet strong and durable composite-reinforced EPO construction Large and convenient top hatch with clear canopy, cockpit detail, and pilot figure Plastic capped hatch edges and opening for added durability to prevent paint chipping One-piece wing with convenient hands-free connections for more accessible storage and transport Factory-finished with a fully painted and high-visibility trim scheme Popular 6S 4000–7000mAh 30+C batteries deliver excellent performance and flight times Contents (1) E-flite Habu XS (eXtra Sport) 80mm EDF with: (1) Spektrum Brushless Inrunner Motor (installed) (8) Spektrum Digital, Metal-Geared Servos (installed) (1) Spektrum Avian 130-Amp Smart Brushless ESC (installed) (1) Spektrum AR637TA+ 6-Channel Receiver with AS3X+ and SAFE Select (installed) (1) Product Manual Requires For Standard Functionality: (1) Full-range 6-channel Spektrum DSMX®/DSM2® compatible transmitter For SAFE Select OR Motor/Thrust Reversing Functionality: (1) Full-range 7-channel Spektrum DSMX/DSM2 compatible transmitterFor SAFE Select AND Motor/Thrust Reversing Functionality: (1) Full-range 8+ channel Spektrum DSMX/DSM2 compatible transmitter (1) 6S 22.2V 4000–7000mAh 30+C LiPo with EC5 or IC5 Connector (1) Compatible LiPo charger Skill Level 2 – Some Experience Required Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up, and fly similar class models. And although this is one of the easiest-to-fly “full-house” Habu models yet, it’s not a suitable first-ever RC aircraft for new pilots or first-ever EDF (Electric Ducted Fan) jet model for intermediate to experienced RC pilots. You should have the experience and skills necessary to successfully fly simpler EDF models like the E-flite Habu SS (Super Sport) 50mm or 70mm or similar jet models before attempting to fly the Habu XS (eXtra Sport) 80mm EDF. Are you new to flying RC (Radio Controlled) aircraft? If you are, the Habu XS 80mm is not a suitable first-ever RC model, and we recommend learning to fly with one of our purpose-built trainer aircraft such as the E-flite® Habu STS (Smart Trainer with SAFE) 70mm EDF (www.horizonhobby.cc/HabuSTSRTF). It’s equipped with exclusive and innovative SAFE technology, making it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) Basic version includes nearly everything needed to fly (except for a compatible LiPo battery and charger sold separately or together in a money-saving Powerstage bundle) and is a perfect choice if you’re a new RC pilot. Exclusive Technologies The BNF Basic version Habu XS 80mm EDF is equipped with exclusive Spektrum AS3X+ and SAFE Select technologies. Enhanced AS3X+ technology works behind the scenes to smooth out the effects of wind and turbulence and deliver an even more locked-in feel than standard AS3X, which makes it seem like you’re flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits and automatic self-leveling that can be turned on and off at the flip of a switch! If you don’t want to enable the SAFE Select features, simply bind the receiver normally, and only AS3X+ will be active. The receiver is also loaded with a Smart Transmitter File (STF) that allows you to import all the settings for NX and iX series transmitters during the binding process to be ready to fly in less time than ever! Smart Technology The exclusive Spektrum Avian Smart ESC provides a variety of real-time power system-related telemetry data, including overall battery voltage, current draw, motor RPM, and more – with both Smart and non-Smart batteries – via compatible receivers (including the AR637TA+) and Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/3 and 8 G2, the DX9, NX6 to 20, iX12 to 20 and others) while you fly. Plus, optional-use motor/thrust reversing can help shorten rollout after landing and offers other special ground handling capabilities (7–8+ channel transmitter required for reversing). eXtra Capable Gear Shock-absorbing, trailing link struts on the nose and main gear soak up the bumps of rough surfaces, including grass, and make flying from a wider variety of fields possible. The reliable electric retracts have durable metal components, and the steerable nose wheel plus wide-spaced main gear offers excellent ground handling. eXtra Functional Features The factory-installed flaps offer improved slow-flight capability and performance, making it possible to take off and land in shorter distances and at slower speeds. This makes the Habu XS 80mm a perfect first “full-house” jet model for those moving up from simpler EDF models. It’s also equipped with LED navigation and landing lights for improved visibility and orientation. eXtra Precision The composite-reinforced EPO airframe is lightweight yet durable. The eight factory-installed digital, metal-geared servos with ball-link equipped linkages, plus control surfaces with captured rod hinges, deliver crisp and precise control at every speed. eXtra Capability The Habu XS design offers incredible handling across a wide speed range and flight envelope. From slower-than-expected landings and low-speed passes to 120+ MPH high-speed flybys, the airframe and power system deliver unbelievable performance and aerobatic capability so you can perform giant loops, rolls, knife edge flight, snaps, and other maneuvers. eXtra Easy Assembly No glue is required for assembly, and you can have the Habu XS ready to fly in less time than it takes to charge a battery! The one-piece wing with hands-free connections bolts into place and can easily be removed for convenient storage and transport. Plus, the airframe is factory-finished in a premium, fully painted, and high-visibility trim scheme. eXtra Performance The 12-blade 80mm fan, Spektrum brushless inrunner motor and Avian 130-amp ESC combine with your 6S 4000–7000mAh 30+C LiPo battery to deliver excellent vertical performance and a fantastic speed range with virtually instantaneous throttle response. But what makes the experience truly rewarding is the sound the power system produces—it’s almost like a real turbine engine.

Hands-Free Power Fuselage Side for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet. Contents 1 Hands-Free Power Connector Female (Fuselage Side) 2 M3x10mm Self-Tapping Screws

Hands-Free Power Wing Side for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet. Contents 1 Hands-Free Power Connector Male (Wing Side) 2 M3x10mm Self-Tapping Screws

Conscendo 2.0m hardware (screw) set. Contents M1.4 x 7 screw: 16 M2 x 14 screw: 8 3.2 x 6 screw: 3 4.2.5 x 10 screw: 4 M3 x 8 screw: 4 3 x 16 screw: 4 M3 x 14 screw: 4 M2 x 8.5 screw: 2 M4 x 12 screw: 2 M3 nut: 2 2.5 x 8 screw: 4 M2 x 3.45 screw: 4 M2 x 4 screw: 6 2.5 x 15 screw: 1

Screw and Hardware Set for the E-flite Gee Bee R-2 Racer 1.0m RC airplane. Contents Wing Securing Screws M3 x 25mm Flathead Machine 4 Wing Hands-Free Connector Securing Screws M2 x 8mm Flathead Self-Tapping 2 Aileron Servo Cover Securing Screws M2.5 x 10mm Flathead Self-Tapping (4 Red, 2 Silver) Aileron Control Horn Screws M2 x 8mm Button Head Self-Tapping 4 Horizontal Stabilizer Securing Screws M3 x 70mm Flathead Self-Tapping 2 Elevator Servo Mounting Screws M2.5 x 8mm Button Head Self-Tapping 2 Rudder Securing Screws Top and Bottom M2 x 8mm Button Head Self-Tapping 2 Rudder Center Hinge Securing Screws M2 x 8mm Button Head Self-Tapping 2 Rudder Servo Mounting Screws M2.5 x 8mm Button Head Self-Tapping 2 Rudder Control Horn Screws M2.5 x 8mm Button Head Self-Tapping 2 Fuselage Hands-Free Plate Securing Screws M2 x 8mm Flathead Self-Tapping 2 Motor Mounting (Firewall) Screws M3 x 12mm Button Head Self-Tapping 4 Motor "X" Mount Securing Screws M2.5 x 6mm Flathead Machine 4 Propeller Adapter Securing Screws Socket Head Cap M2.5 x 10mm 4 Wheel Pant Mounting Screws M3 x 10mm Button Head Machine (3 Red, 1 Silver) Tailwheel Pant Securing Screws M2 x 8mm Button Head Self-Tapping 3 Tailwheel Axle Screw M2 x 17mm Flathead Machine 1 Landing Gear Top Mounting Screws M3 x 10mm Button Head Machine 4 Drag Link Securing Screws M2 x 6mm Button Head Machine 2 Landing Gear Lower Fork Securing Screws M3 x 10mm Button Head Machine with Washer 2 Wheel Pant Assembly Screws M2.5 x 8mm Button Head Self-Tapping 14 Servo Arm Screws M2 x 4.5mm Button Head Machine 4

Hatch Latch Pin for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet.  Contents 1 Hatch Latch Sliding Pin 1 Hatch Latch Sliding Pin Retainer 1 Hatch Latch spring 2 Self-Tapping Screws

Painted hatch with hatch magnets installed.

Replacement Horizontal Stabilizer for the E-flite Gee Bee R-2 Racer 1.0m RC airplane. Contents Horizontal Stabilizer 1 Control Horn Joiner Hinged Elevators 1

Horizontal Stabilizer Set for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet. Contents 1 Left Horizontal Stabilizer with Elevators 1 Right Horizontal Stabilizer with Elevators 2 Elevator Control Horns with Backing Plates 2 Elevator Servo Covers 6 M2.5x8mm Self-Tapping Servo Cover Screws

Painted horizontal stabilizer with graphics applied. Includes installed elevator, control horn, and ball link.

The E-flite Timber 10th Anniversary Edition Horizontal Stabilizer Set is a replacement designed for the E-flite Timber 1.5m 10th Anniversary Edition Electric Airplane. Includes (1) Left Horizontal Stabilizer (1) Right Horizontal Stabilizer (2) 2.5x12mm Self-Tapping Screws

The E-flite® UMX™ Viper Horizontal Stabilizer is a replacement designed for use on the E-flite UMX Viper 30mm EDF Electric Jet. This stabilizer is pre-painted and includes control horns and linkage ball studs, making it the perfect choice for restoring your aircraft.

Replacement Landing Gear Axles for the E-flite Gee Bee R-2 Racer 1.0m RC airplane. Contents Main Gear Axles (2.5mm Diameter x 30mm Length) 2 Main Gear Axle E-Clips 2 Tailwheel Screw M2 x 17mm Flathead Machine 1

Landing Gear Axles for the E-flite Airbus A320 1.5m Airliner 64mm EDF Jet. Contents 1 Nose Gear Axle 2 Main Gear Axles 3 M2.5 Axle E-ClipsX 6 M2.5 Axle E-Clips