dualsky (93)

SUMMIT 60X 60A Brushless Speed Controller for Gliders Features A new generation of 32-bit ARM electric drive system. Drive frequency up to 48MHZ, maximum speed up to 510K eRPM Low internal resistance N-MosFETs, providing explosive power far exceeding the rating current Multi-layer PCB board with low internal resistance acts as an excellent cooling substrate Thanks to the metal CNC housing, it achieves a high power to weight ratio Implement multiple protection such as throttle, voltage, current, temperature and low RPM Efficient driving core, abundant torque, effectively avoid Sync-Loss conditions Support efficient SINE wave working mode Support regenerative braking Rotation direction can be set, and support bidirectional operation mode In addition to PWM throttle signal, support Multishot, Oneshot, Dshot & Proshot protocols Firmware can be updated, and provide rich settings X series integrates high current UBEC with 200% peak capacity. Slim version available for narrow fuselage models. Supports multiple telemetry protocols through Tele-adapter.

This Dualsky Summit 130A Lite 3S-6S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software

This Dualsky Summit 22A Lite 2S-4S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software Specification Dimensions (LxWxH): 32 x 15 x 5.5mm (w/o wire) Weight (w/ wire): 10.2g Number of Cells: 2S-3S LiPo, 7.4V-11.1V Continuous Current: 16A Burst Current: 30A Resistance (Ri) (mOhm): ~4.8 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 2A const./4A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510 erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default = Maximum (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 20AWG, 100mm w/ JST Wires to Motor: 20AWG, 50mm w/ DB2F Signal Wires: JR, 150mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky Summit 22A Lite 2S-4S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software Specification Dimensions (LxWxH): 44 x 23 x 7.2mm (w/o wire) Weight (w/ wire): 18.2g Number of Cells: 2S-4S LiPo, 7.4V-14.8V Continuous Current: 22A Burst Current: 40A Resistance (Ri) (mOhm): ~6.0 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 4A const./8A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default = Maximum (Programmable) Overheat Protection: YES(Default=140 C)Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 18AWG, 120mm Wires to Motor: 20AWG, 70mm w/ DB2F Signal Wires: JR, 200mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky Summit 30A Lite 2S-4S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software Specification Dimensions (LxWxH): 44 x 23 x 7.2mm (w/o wire) Weight (w/ wire): 19.7g Number of Cells: 2S-4S LiPo, 7.4V-14.8V Continuous Current: 30A Burst Current: 50A Resistance (Ri) (mOhm): ~2.8 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 4A const./8A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default = Maximum (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 18AWG, 120mm Wires to Motor: 18AWG, 70mm w/ DB3F Signal Wires: JR, 200mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky Summit 45A Lite 3S-6S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software Specification Dimensions (LxWxH): 66 x 25 x 10.7mm (w/o wire) Weight (w/ wire): 44g Number of Cells: 3S-6S LiPo, 11.1V-22.2V Continuous Current: 45A Burst Current: 70A Resistance (Ri) (mOhm): ~3.0 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 6A const./10A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default =125ms (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 14AWG, 150mm Wires to Motor: 14AWG, 80mm w/ DB3F Signal Wires: JR, 350mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky Summit 45A Lite 3S-6S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software Specification Dimensions (LxWxH): 66 x 25 x 10.7mm (w/o wire) Weight (w/ wire): 49g Number of Cells: 3S-6S LiPo, 11.1V-22.2V Continuous Current: 60A Burst Current: 80A Resistance (Ri) (mOhm): ~1.4 milliohms Battery eliminate circuit BEC: 6.0V, Switching mode, 6A const./10A peaks Signal & Frequency: Default = PWM(upto 333Hz), THR calibration Enabled Timing System: Programmable (Default=16°) Motor Direction: Normal - Reversed - Bidirectional (4D flight & EDF Braking) Programming: USBLINK MP (BLHeli32_Suite) Start Power: 100% (Programmable) Work Frequency: LOW = 24KHZ, High = 24KHz (Programmable) Telemetry: ON (Auto telemetry enabled, protocol=KISS) Energy Recovery: YES (Default-Disable, freewheel) Brake On Stop: Default=OFF (Adjustable) Maximum Speeds: PWM at 8KHz: 510k erpm, Multishot at 16kHz: 450k erpm / Dshot at 8kHz: 470k erpm / Dshot at 16kHz with sine: 280k erpm Low Voltage Protection: Programmable (Default=3.00V/cell) Acceleration: Default =125ms (Programmable) Overheat Protection: YES(Default=140 C) Water & Dust Proof: IP43 Beacon Beeps: YES, 20 Mins Input Wires: 14AWG, 150mm Wires to Motor: 16AWG, 80mm w/ DB3F Signal Wires: JR, 350mm + 1pin telemetry Tested Motors: Dualsky EG, EA V3 series, Dualsky EVO V2 line, Dualsky GA line. * Please follow the parameter compatibility requirements of the motor Applications: Middle class electric powered gliders, 3D/ sports aircraft, F3As and Fixed wing UAVs/ eVOLs

This Dualsky Summit 85A Lite 3S-6S ESC is designed for models requiring a high-current ESC output, such as 3D aircraft or EDF jets with landing gear and/ or lighting systems. Each ESC in this series is programmable with the Dualsky USB Link Multi Purpose (DSB22382, sold separately). Features A new generation of cost-effective 32-bit ARM electric drive systems Drive frequency up to 48MHZ Maximum speed up to 510k eRPM Multilayer low internal resistance PCB motherboard an excellent heat dissipation substrate Implemented multiple protection: throttle, voltage, current, temperature, and low RPM Provides sufficient power supply to 3D aircraft, EDF jets, landing gear, and lighting systems Integrated high-current UBEC Excellent peak performance Effectively avoids Sync-Loss conditions Supports Dualsky GA series 28-pole motors Supports SINE wave mode, with efficiency up to 5% Supports regenerative braking Selectable rotation direction Supports bidirectional operation mode In addition to PWM throttle signal, it also supports Multishot, Oneshot, Dshot and Proshot protocols with Dualsky TELElink (not included) 100% load test passed, in line with ISO9001:2015 quality system Programmable with Dualsky USB Link MP and PC programming software

This Dualsky T8 Thin Coreless Programmable HV Servo is designed for performance RC Gliders. This model features standard horizontal mounting tabs and has a lower torque rating than the plus version of the T8 servo. Features Wide voltage compatibility (8.4V to 3.5V) Excellent torque and speed Two versions of over-sized (exposed) motors Two types of mounting tabs (upright & horizontal) High-quality hardened steel gears Fully CNC machined aluminium case Dual ball bearings Excellent heat dissipation Thin and compact design Designed for performance RC gliders (F5J light, eRES, F5K & F3K) Specifications Dimensions (mm): WxTxH: 23.5 x 8.0 x 22.3 Weight with Wire (g): ~10.06 Torque and Speed @ 3.3V: 1.0 kg.cm, 0.18 sec/60degrees Torque and Speed @ 3.8V: 1.3 kg.cm, 0.16 sec/60degrees Torque and Speed @ 6.0V: 2.0 kg.cm, 0.12 sec/60degrees Torque and Speed @ 7.4V: 2.6 kg.cm, 0.09 sec/60degrees Torque and Speed @ 8.4V: 3.0 kg.cm, 0.08 sec/60degrees Mounting Tab Spec: D2.0, P/R 27.0mm Idle Current: ~30mA Operating Temperature (F): -10°C...50°C Position Feedback: Potentiometer Programming: USBLINK MP Dead Band/ Resolution: 2μs (Programmable) Working Frequency: Upto 333Hz Operating Travel: ~ +/-50° (1000~2000 μsec) Neutral Position: 1500 μsec Maximum Travel: ~180°(500-2500 μsec) Bearings: 2 Ball Bearings Gear Set Material: Hardened Steel Output spline: 15T/Ø3.90 Full CNC Alu. Case: YES Signal lead :150mm w/ JR plug

This Dualsky T8F Flat Thin Coreless Programmable HV Wing Servo is designed for performance RC Gliders. This model features vertical mounting tabs and has a lower torque rating than the plus version of the T8 servo. Features Wide voltage compatibility (8.4V to 3.5V) Excellent torque and speed Two versions of over-sized (exposed) motors Two types of mounting tabs (upright & horizontal) High-quality hardened steel gears Fully CNC machined aluminium case Dual ball bearings Excellent heat dissipation Thin and compact design Designed for performance RC gliders (F5J light, eRES, F5K & F3K) Specifications Dimensions (mm): WxTxH: 23.5 x 8.0 x 22.3 Weight with Wire (g): ~10.06 Torque and Speed @ 3.3V: 1.0 kg.cm, 0.18 sec/60degrees Torque and Speed @ 3.8V: 1.3 kg.cm, 0.16 sec/60degrees Torque and Speed @ 6.0V: 2.0 kg.cm, 0.12 sec/60degrees Torque and Speed @ 7.4V: 2.6 kg.cm, 0.09 sec/60degrees Torque and Speed @ 8.4V: 3.0 kg.cm, 0.08 sec/60degrees Mounting Tab Spec: D2.0, P/R 27.0mm Idle Current: ~30mA Operating Temperature (F): -10°C...50°C Position Feedback: Potentiometer Programming: USBLINK MP Dead Band/ Resolution: 2μs (Programmable) Working Frequency: Upto 333Hz Operating Travel: ~ +/-50° (1000~2000 μsec) Neutral Position: 1500 μsec Maximum Travel: ~180°(500-2500 μsec) Bearings: 2 Ball Bearings Gear Set Material: Hardened Steel Output spline: 15T/Ø3.90 Full CNC Alu. Case: YES Signal lead: 150mm w/ JR plug

This Dualsky T8FP Flat Thin Coreless Plus Programmable HV Wing Servo is designed for performance RC Gliders. This model features vertical mounting tabs for wings or flaps and has a higher torque rating than the non-plus version of the T8 servo. Features Wide voltage compatibility (8.4V to 3.5V) Excellent torque and speed Two versions of over-sized (exposed) motors Two types of mounting tabs (upright & horizontal) High-quality hardened steel gears Fully CNC machined aluminium case Dual ball bearings Excellent heat dissipation Thin and compact design Designed for performance RC gliders (F5J light, eRES, F5K & F3K) Specification Dimensions (mm): WxTxH: 23.5 x 8.0 x 26.3 Weight with Wire (g): ~11.8 Torque and Speed @ 3.8V: 3.0 kg.cm, 0.15 sec/60degrees Torque and Speed @ 6.0V: 4.8 kg.cm, 0.11 sec/60degrees Torque and Speed @ 7.4V: 5.6 kg.cm, 0.09 sec/60degrees Torque and Speed @ 8.4V: 5.9 kg.cm, 0.08 sec/60degrees Mounting Tab Spec: D2.0, P/R 27.0mm Idle Current: ~30mA Operating Temperature (F): -10°C...50°C Position Feedback: Potentiometer Programming: USBLINK MP Dead Band/ Resolution: 2μs (Programmable) Working Frequency: Upto 333Hz Operating Travel: ~ +/-50° (1000~2000 μsec) Neutral Position: 1500 μsec Maximum Travel: ~180°(500-2500 μsec) Bearings: 2 Ball Bearings Gear Set Material: Hardened Steel Output spline: 15T/Ø3.90 Full CNC Alu. Case: YES Signal lead: 150mm w/ JR plug

This Dualsky T8P Thin Coreless Plus Programmable HV Servo is designed for performance RC Gliders. This model features standard horizontal mounting tabs and has a higher torque rating than the non-plus version of the T8 servo. Features Wide voltage compatibility (8.4V to 3.5V) Excellent torque and speed Two versions of over-sized (exposed) motors Two types of mounting tabs (upright & horizontal) High-quality hardened steel gears Fully CNC machined aluminium case Dual ball bearings Excellent heat dissipation Thin and compact design Designed for performance RC gliders (F5J light, eRES, F5K & F3K) Specification Dimensions (mm): WxTxH: 23.5 x 8.0 x 26.3 Weight with Wire (g): ~11.8 Torque and Speed @ 3.8V: 3.0 kg.cm, 0.15 sec/60degrees Torque and Speed @ 6.0V: 4.8 kg.cm, 0.11 sec/60degrees Torque and Speed @ 7.4V: 5.6 kg.cm, 0.09 sec/60degrees Torque and Speed @ 8.4V: 5.9 kg.cm, 0.08 sec/60degrees Mounting Tab Spec: D2.0, P/R 27.0mm Idle Current: ~30mA Operating Temperature (F): -10°C...50°C Position Feedback: Potentiometer Programming: USBLINK MP Dead Band/ Resolution: 2μs (Programmable) Working Frequency: Upto 333Hz Operating Travel: ~ +/-50° (1000~2000 μsec) Neutral Position: 1500 μsec Maximum Travel: ~180°(500-2500 μsec) Bearings: 2 Ball Bearings Gear Set Material: Hardened Steel Output spline: 15T/Ø3.90 Full CNC Alu. Case: YES Signal lead: 150mm w/ JR plug

The Dualsky USB Programming Link works on all Summit ESC's that utilise BLHELI32 software. This includes the Summit 30 and 60 series Brushless ESC's. Simply download the latest BL HELI software using the QR code in the instructions, then plug the USB link in to your PC, connect the ESC as shown and choose the parameters you want to set. This includes, but is not limited to, direction of rotation, brake strength, timing, ramp up speed, start up tone and volume, low voltage threshhold and more. It is very intuitive to use and offers lots of adjustment for these small, lightweight and highly efficient Summit speed controls.

This XM2202TY-24 Brushless Outrunner motor from Dualsky is designed for F3P indoor aerobatic aircraft competitions. Features Designed for F3P competition Includes two types of motor mounts New design, breakthrough technology The lightest of the same class High torque winding Optimized for PT propeller Hollow shaft Propeller protector Specifications Motor Type: Brushless Outrunner Dimensions: 26 x 14.8 mm KV: 1700 Weight: 10 g

This XM2203TY-16 Brushless Motor is designed for F3P and freestyle indoor flying. Features Designed for F3P and freestyle flight Includes two types of motor mounts New design, breakthrough technology The lightest of its class High torque winding Optimized for PT Propeller Hollow shaft Propeller protector Specifications Motor Type: Brushless Outrunner Dimensions: 26 x 14.8 mm KV: 1650 Weight: 13 g

This Dualsky XM2225EG-23 1600kv Brushless Motor is designed for small RC gliders. Features 14 pole arc magnets providing strong direct drive torque Precision rotor balancing technology features NMB bearing capable of up to 30000rpm Shaft design increases the 'survival rate' of motor when landing Specification RPM / V: 1600 kv Weight: 32 g Diameter: 22.4 mm Length: 24.4 mm Diameter of Shaft: 3 mm Pitch of Holes: 16 / 16 mm Input Connectors: GC2.0 3 pairs Slots & Poles: 12N14P Io @ 10V: 0.65 A Resistance (Ri) (mOhm): 115 No of Cells: 2 - 3 S LiPo Max. Efficiency Current: 9 A Max. Burst Current: 18 A Max. Power (15S): 200 W Torque (mNM): 133 Recommended ESC: XC-22U-Lite (15o) Propeller: 2S: 9x5, 9x6, 10x6 3S: 7x4, 8x4, 8x5 Applications: F5K / RES

This Dualsky XM2838EG-11 1100kv Brushless Glider Motor is compatible with gliders that are 800g - 2000 g. Features Oversized imported bearings are durable and impact-resistant Strong 4 mm shaft Dualsky's largest torque motor of 28 mm diameter

This Dualsky XM3548EGL-9 820kv Brushless Motor is compatible with medium and large scale RC gliders. Features 14 pole arc magnets provide stong direct drive torque. Grade 220 enameled wire and high temperature epoxy adhesive of the same level are adopted with five-star overload resistance grade Motor front extension adopts a hollow shaft, convenient coupling design and supports EA V3 & ECO V2 series upgrade installation

This Dualsky XM3548EGL-9 820kv Brushless Motor is compatible with RC gliders weighing up to 8400 g. Features Designed for gliders weighing up to 8400g 14 pole arc magnets provide strong direct drive torque Grade 220 enameled wire and high temperature epoxy adhesive of the same level are adopted with five-star overload resistance grade Motor front extension adopts a hollow shaft, convenient coupling design and supports EA V3 & ECO V2 series upgrade installation

The Dualsky XM5060EA-12 400kv Brushless Motor looks like a standard outrunner motor but is particularly efficient and highly effective. For the ambitious model airplane builder with a special price-performance ratio.

This Dualsky XM6360EGL-19 220kv Brushless Motor is compatible with medium and large scale RC gliders weighing up to 20kg. Features 14 pole arc magnets provide stong direct drive torque Grade 220 enameled wire and high temperature epoxy adhesive of the same level are adopted with five-star overload resistance grade Motor front extension adopts a hollow shaft, convenient coupling design and supports EA V3 & ECO V2 series upgrade installation