Reset
AOSHIMA
Aoshima A005991 1/24 LB-Wor...
$99.95
Aoshima's new model kit of the LB Works Lamborghini Aventador ver. 2 adds a newly molded front diffuser, wheels, and rear wing for a new look! The over fender is molded to the body for ease of assembly; this kit is a great step up from Aoshima's snap-kit series, since transparent stickers and foil stickers are included to make it easy for beginners (conventional waterslide decals are also included).
The kit is also molded in color so paint isn't necessary. The vehicle height and camber can be adjusted to your liking, even after assembly!
AOSHIMA
Aoshima A005995 1/24 Lb-Wor...
$ PRICE IN PROGRESS!
Aoshima's newest model kit of the Lamborghini Aventador is a limited edition produced to commemorate Liberty Walk's 25th anniversary, as well as the 50th birthday of their representative Wataru Kato!
Features
Its design is more sporty than the first Aventador.
This kit has been designed with ease of assembly in mind, and it's recommended even for beginning modelers!
The parts are unpainted and molded in color, so the end result will look great even without painting
You can also adjust the vehicle height and camber angle after assembly.
Both waterslide decals and stickers are included for the markings, too.
AOSHIMA
Aoshima A005999 1/24 Toyota...
$63.95
Aoshima's kit of the 2016 Toyota GRS210 Crown patrol car features a light bar elevator that can be assembled in either the raised or lowered position! The roof life, 16-inch Genuine wheels, and police car grille equipment set are all new parts, as are the decals. This model comes with dB tires.
AOSHIMA
Aoshima A006101 1/24 Nissan...
$47.95
This model kit of the 1975 Nissan S30 Fairlady Z Aero Custom features commercialized magnesium wheels for racing, newly created by Nissan Works at the time! It also features racing parts, slight pull tires, and new decals.
AOSHIMA
Aoshima A006102 1/24 Nissan...
$51.95
In 1982, after a 10 year absence, the Nissan Skyline returned to the racing circuit. This reintroduction has quite a passionate backstory. In the 10 years that Nissan stopped officially competing with the Hakosuka Skyline, Masahiro Hasemi had successfully raced privately as a Hasemi Motor Sports representative-cum-racer as a result of the strong demand from those at Prince Auto Sales who wish to see the Skyline compete. At 1,000 yen each, Nissan Prince Dealers Club (Nissan PDC) stickers were sold to Prince employees in order to fund the creation fo a Group 5 DR30 Skyline racing cat. This plan made it possible to sustain support from the Nissan Oppama Institute and made racing the Nissan Works' Super Silhouette Skyline a reality. Thus, the hopes and dreams of the Skyline lovers took form as this famous car, the Super Silhouette.
Includes
Clear parts
Rubber tires
Chrome-painted wheels
Decals
AOSHIMA
Aoshima A006103 1/24 Mazda ...
$49.95
The Savanna RX-7 first appeared in March of 1978 with its stylish retractable headlights, and it quickly gained popularity. It makes the best of its lightweight rotary engine, and with its low center of gravity and high maneuverability. In 1979 in garnered great attention among the American motor sports scene through the International Motor Sports Association (IMSA) when it debuted in the "24 hours of Daytona" race and won first place in the GTU racing class. It continued to win for seven years in a row.
This kit replicates car 7, as driven by the Three Musketeers of racing, Yoshimi Katayama, Takashi Yorino, and Yojiro Terada.
Includes
Clear parts
Chrome wheels
Decals
AOSHIMA
Aoshima A006104 1/24 Nissan...
$50.95
After a record of 50 wins, of which 49 were consecutive, the Hakosuka GT-R made a full model change to the next generation 'Ken & Mary' C110 Skyline in September 1972. At the 19th Tokyo Motor Show in the same year, the 2000GT-R Skyline hardtpo with racing specs was also displayed. With its large spoilers, works fender and racing colors, there was no doubt that the 2000GT-R was bound to be successful in the circuits.
This kit replicates the 'Ken & Mary' GT-R with its racing specs from its racing poster.
Includes
Clear parts
Rubber wheels
Decals
AOSHIMA
Aoshima A006105 1/24 Nissan...
$38.95
The invincible fleet Skyline 2000GT-R, 19-time winner, as seen at the '70 JAF Grand Prix TS race held at Fuji Speedway on May 3, 1970. This kit can reproduce several cars from this race: Car No. 56, 57, 58 and 59.
Includes
Clear parts
Rubber tires
Chrome painted parts
Decals
AOSHIMA
Aoshima A006106 1/24 Nissan...
$40.95
Features
Reproduction of 6 consecutive meter decals
Photo-etched parts
Choice of aluminum wheels or Genuine iron chain wheels
Vehicle height and camber angle are adjustable
Aluminum license plate
Uses Pirelli P7 tires
AOSHIMA
Aoshima A006107 1/24 Nissan...
$36.95
Features
New shape previous term GT grille
New shape previous term GT rear panel by Ken Mary
Genuine full cap wheels
Comes with aluminum wheels
Aluminum license plate
Uses 14-inch 185-width tires
AOSHIMA
Aoshima A006108 1/24 Nissan...
$50.95
Features
Choice of early or late GT grille, Japan version
Choice of early or late GT rear panel, Japan version
Early-type four round headlines and late-type two corner lights included
Genuine aluminum wheels, Japan version
Vehicle height is adjustable
Spring suspension
Aluminum license plate
Uses Pirelli P7 tires
AOSHIMA
Aoshima A006109 1/24 Nissan...
$45.95
Features
Sunroof visor
Lip spoiler
Choice of Genuine aluminum wheels or BBS wheels
Lowdown parts
Window frame masking stickers
Aluminum license plate
Uses 16-inch dB tires
AOSHIMA
Aoshima A006110 1/24 Nissan...
$50.95
Features
Can be built as either the Cedric or the Gloria
Plated front grille
Genuine aluminum wheels
Slit parts and aero parts
Lowdown parts
Window frame masking sticker
Aluminum license plate
Uses 16-inch dB tires
AOSHIMA
Aoshima A006112 K-Break Hyb...
$20.95
K-BREAK wheels are finally available for sale individually! This standard 5-spoke 18 inch design is sure to go well with any 1/24 scale car.
Includes
Rubber tires
Wheels
Decals
Polycaps
AOSHIMA
Aoshima A006113 1/24 K-Brea...
$20.95
K-BREAK wheels are finally available for sale individually! This standard 5-spoke design is sure to go well with any 1/24 scale car.
Includes
Rubber tires
Wheels
Decals
Polycaps
AOSHIMA
Aoshima A006114 1/24 K-Brea...
$20.95
K-BREAK wheels are finally available for sale individually! This 19 inch mesh design is sure to go well with any 1/24 scale car.
Includes
Rubber tires
Wheels
Decals
Polycaps
AOSHIMA
Aoshima A006115 1/24 K-Brea...
$20.95
K-BREAK wheels are finally available for sale individually! This 19 inch mesh design is sure to go well with any 1/24 scale car.
Includes
Rubber tires
Wheels
Decals
Polycaps
AOSHIMA
Aoshima A006120 1/24 Lambor...
$53.99
Here's a model kit of the high-end Lamborghini Super Veloce (SV) that first appeared in 2015!
It includes a detailed reproduction of the interior, exterior and engine; the hood can be opened and closed to admire the engine after assembly. The iconic Lamborghini scissors doors can be opened and closed, the tail lights are molded in color and masking stickers for the window frames are included too.
The trademarks, copyrights and design rights in and associated with Lamborghini , Lamborghini with Bull and Shield Device and the following Lamborghini vehicle Aventador LP 750-4 Superveloce are used under license from Automobili Lamborghini S.p.A., Italy.
AOSHIMA
Aoshima A006121 1/24 2015 L...
$77.95
The Lamborghini Aventador Pirelli Edition commemorates the long-standing partnership between Lamborghini and the tire manufacturer Pirelli!
Aoshima's model kit reproduces the sleek red line accents; the characteristic scissor doors can be opened and closed after assembly. The interior, exterior and engine are all reproduced in great detail; the hood can be opened and closed after assembly, so you can admire the engine. Paint mask stickers for the window frames are included too.
AOSHIMA
Aoshima A006126 1/24 BLMC G...
$63.95
From its debut at the 1962 London Motor Show until October 1980, an estimated 520,000 MGB's were sold, making it a worldwide long-selling vehicle. In its 18 years of production, the basic body structure, chassis and engine did not go through major changes, but constant improvements were applied. Therefore, the production year/month of the MGB ca be identified by checking details of exterior, interior and engine bay.
This kit is a plastic model of the MGB and replicates the specifications that were used in the late 1960's for racing. The elegant grille and bumper are plated, and the MGB racing spec 8-spoke wheels are included. Furthermore, window frame masking seals and etching parts are also included, allowing you to make the MGB more realistic.
Features
New decals
Plated grille and bumper
Dedicated bucket seat
Special roll bar
Special hard top parts
Large diameter fog lamp
Eight-spoke aluminum wheels
14-inch 185-width tires
AOSHIMA
Aoshima A006127 1/24 Mazda ...
$40.95
Aoshima brings us a kit of the third-generation Mazda RX-7 FD3S from 1996! This is the Type IV; the decals can be applied to both the Infini and Mazda versions of this car. Window frame masking stickers are included.
In 1966, the 3rd generation of RX-7 FD3S received a minor face lift (a.k.a. model IV) and has a larger rear wing, 3-round shape tail lights, also 17 inch high pressure casting aluminium rims.
This model IV RX-7 has a simplified vacuum routing manifold and a 16-bit ECU which increased the boost by extra 10 PS.This model kit recreates both Mazda and Efini logos which can be used at your choice. A window mas sticker is also included.
AOSHIMA
Aoshima A006129 1/24 Toyota...
$50.95
This kit from Aoshima can be built as any of the last four FR Corolla sedans! It can be built as the first-half or second-half versions of the GT or DX. An aluminum license plate and new decals are included; the exterior parts feature a plating finish, and it uses 15-inch P7 tires.
The 4th generation Corolla, the E70 series was introduced in march 1979 with a full model change and became a later model in August 1981 with minor changes. With a wide selection of models ranging from coupe, hard-top and commercial van, the E70 Corolla became a global best seller.
This kit is selectable between the flagship 1600GT 4-door sedan model and the mass-produced DX grade late model. The molds for this kit were designed and developed in the 1970s and may not be at the quality of replication in today's standards. However, with the late model front grille, chrome-finished bumper and grade-specific wheels, you will be able to assemble the E70 Corolla to your preference.
AOSHIMA
Aoshima A006130 1/24 Volksw...
$34.95
The Volkswagen Beetle is still popular worldwide, and Aoshima brings us a model kit of the 13AD Beetle 1303S from 1973!
It can be built as a left-hand or right-hand drive version; an aluminum license plate and optional mirror are included. The exterior parts feature a plating finish, and it uses Pirelli P7 tires.
Originally released in 1983, the iconic Volkswagen Beetle was produced with varying minor changes until 2003. In 1971, the 1302 series was released. With its basic engine design and placement unchanged, the front suspension was changed from torsion bar to MacPherson strut. Again, minor change was applied in 1973 to the 1303 series with a rounded windshield and enlarged tail lights. The 1303 was equipped with a 1300 cc engine, and 1303S with 1600 cc engine. Production of the 1303 series ended in 1975, but production of the convertible model which was base on the 1303S series continued until 1979.
AOSHIMA
Aoshima A006131 1/24 Toyota...
$56.95
Aoshima adds the 1994 Toyota LN107 Hilux Pickup Double Cab to its lineup of cars dressed up with aero parts and custom wheels!
Includes
Lift kit parts
Plated chassis
Super Swamper tires
Aluminium Wheels
Window masking seals included