Reset
BANDAI
Bandai MG 1/100 Infinite Ju...
$85.95
There's no better justice than Infinite Justice--and Bandai does justice to the Mobile Suit with this highly anticipated Master Grade release!This sharply detailed snap-fit kit of Athrun Zala's personal Mobile Suit comes molded in color, and upon completion the mech will be fully poseable with polycapped joints that allow for posing possibilities galore. This kit introduces to the MG series a new joint system for its side skirt armor that allows you to pose Infinite Justice Gundam kicking, as seen in "Gundam Seed Destiny"!Included are a beam rifle that can be mounted on its back skirt armor, two "Super Lacerta" Beam Sabers that can combine to form a double-bladed beam weapon, and a left arm-mounted shield that stores a detachable "Shining Edge" Beam Boomerang and Grapple Stinger (a bendable wire is provided to display it in mid-deployment). Beam effect parts for the Beam Sabers, "Griffon" Beam Blades connecting the knees and feet, Beam Boomerang, and shield are provided as well.Accompanying Infinite Justice Gundam is the Phantom-01 backpack that can be attached to the mech's back for a boost in speed and firepower. The engine covers can slide out to reveal detailed vernier nozzles. Two same-scale unpainted figures (molded in white) of Athrun in standing and sitting poses are included, along with dry-transfer decals, stickers, and foil stickers for detail. (Bandai's Action Base shown in the photos below is sold separately.)
BANDAI
Bandai MG 1/100 Destiny Gun...
$121.95
The much-anticipated MG kit of Destiny Gundam is here, and is definitely not one to disappoint!Features
The joints on this sharply detailed MG kit are greatly improved to allow for a wider range of movement and are more capable of replicating action poses as seen in the show.
The wings can open and close, and it comes complete with its signature weaponry along with in-scale unpainted figures of Shinn Asuka (sitting and standing) and Stella Loussier.
Foil stickers and original design marking stickers are included for custom markings, plus a custom display stand to assist with dynamic action poses.
This special Extreme Burst Mode set also includes beautiful wing effect parts, clear beam effect parts, and a metallic gray runner of some mechanical parts including hands, plus 1/20-scale clear figures of Shinn Asuka and Kira Yamato.
BANDAI
Bandai MG 1/100 Wing Gundam...
$57.95
Make room on your workbench and set aside a chunk of time! This fabulous Master Grade version of Wing Gundam Zero (as it appeared in the Endless Waltz OVA) is as impressive in the box as it is when completed!Features
About 270 plastic parts (all molded in colour) snap together for assembly; polycaps at the joints ensure superb flexibility.
Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series
The armour, including the wings for which the mecha was named, is attached to the frame.
Included weapons are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles.
A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe.
A super-tiny scale figure (unpainted) of Hiiro Yui is included as well.
Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.
BANDAI
Bandai CHO63461L Chogokin X...
$185.89
The Beloved Spacecraft of Buzz Lightyear
The XL-15 Space Ship from S.H.Figuarts
Featuring fine detail and diecast metal parts, this faithful portrayal puts you right in the action.
This glorious space ship is approximately 24cm in length, and features high quality die-casting parts for maximum detail. Equipped with a landing gear, you can display the XL-15 on the ground, or with the included display base, you can display the XL-15 soaring through the air. Included are also scale models of both Buzz Lightyear and Emperor Zurg for your enjoyment.
Luxurious specifications, with ample painting applications on an alloy body! Die-casting that CHOGOKIN copiously provides! Scaled figures of Zurg and Buzz are also included!
Features
9.45 inches (24cm) long
Made of plastic and diecast
From the Lightyear movie
Highly detailed
Features opening cockpit and landing gear
Contents
XL-15 Space Ship
Landing gear
2 Buzz Lightyear mini figures
Zurg mini figure
Stand
BANDAI
Bandai Gundam Decal No.18 M...
$9.95
This is an accessory or set of accessories for Gundam models.
BANDAI
Bandai MG 1/100 GX-9900 Gun...
$70.95
MG 1/100 GX-9900 Gundam X
Features
The kit features its satellite cannon deployment gimmick
The blue body pieces employ gloss material for extra detail
Reflectors are used to make sure the satellite cannon is the biggest feature on the kit. Deployment is also reproduced.
The chest and central camera eye are reproduced with clear plastic. The shoulder vulcans are also expandable.
Accessories include Satellite Cannon, Beam Sword, Sword for beam effects, Shield Buster Rifle, replacement hands, and two Garrod Ran figures (seated and standing)
This highly detailed and articulated snap-fit kit is molded in multiple colors, with stickers for decoration.
Display stand not included.
Includes
Runner x20, Foil sticker x1, Tetron sticker x1, Panel seat x1, Instruction manual x1
![Bandai 5061587 MG 1/100 00 Qan[T]](http://hobbiesonline.com.au/cdn/shop/files/G5061587-1_dab4ab29-e699-4595-85db-5d68fdf24c69_1280x.jpg?v=1779679229)
![Bandai 5061587 MG 1/100 00 Qan[T]](http://hobbiesonline.com.au/cdn/shop/files/G5061587-2_8126dd9a-9596-4206-a318-c72011fe5342_1280x.jpg?v=1779679230)
BANDAI
Bandai MG 1/100 00 Qan[T]
$60.45
00 Gundam is all the buzz in Japan and Bandai's newest Master Grade, the 00 QAN[T], or Quanta, is creating a buzz all its own. The 00 QAN[T] will come with its massive transformable weapon, which can function as a sword, rifle, and shield, and there's even the option of adding a sold-separately LED for the GN drive (only one needed)! The markings are created by a mix of stickers, dry-transfers, and foil-stickers. Bandai has even included an action base!
BANDAI
Bandai HG 1/144 RAS-96 Anksha
$43.99
This rather unique looking suit from Gundam UC is called the Anksha and is capable of transforming between its Mobile Suit and Mobile Armor modes. When in Mobile Suit Mode the Anskha features some impressive articulation in the joints with some sliding mechanisms built in. When in Mobile Armor mode the Anksha can accomodate an HGUC kit on its back (sold separately) and even comes with option parts to mount whichever kit to the Anksha. If that wasn't enough, Bandai has also included a special display stand.
This is a posable, high-grade or better injection-plastic kit of an item from the Gundam Universe.
BANDAI
Bandai MG 1/100 Acguy
$67.95
The world has long been waiting for a Master Grade Acguy; now that it's here, you won't be disappointed!
A brand-new MG frame was designed for this unique mobile suit, over which you install the "armor" parts; the joints all feature polycaps and are superbly designed, so that the Acguy can take on just about any pose you've seen it take in the series, including the cute curled-up crouch with its arms around its knees! A one-touch spring switch will release the claws on the right "hand", causing them to pop out quite menacingly! Two sets of "effect parts" are included, too -- one features missiles coming out of the Acguy's left "hand", and the other portrays the aquatic jet-streams from the thrusters under the Acguy's feet.
A custom stand is included so you can display the Acguy swimming; and a total of six figures are included -- one seated pilot, that can be placed into the cockpit, one standing pilot, and one guy in scuba gear who can be displayed swimming along with the Acguy; plus the three annoying adorable little kids, Katsu, Retsu, and Kikka.
The Acguy's parts are all molded in colored plastic and snap together for assembly; no paint is required (though painting would definitely improve the overall appearance of the finished model). All the figures, however, will require paint. Stickers and dry transfers are included for a perfect finish.
BANDAI
Bandai HG 1/144 Messala
$59.95
Highly detailed and articulated snapfit kit with parts molded in multiple colors. Markings provided as stickers.
Features
The prototype transformable mobile armor Messala from "Mobile Suit Zeta Gundam" is now available as an HGUC kit.
Despite being 1/144 scale, it boasts a large size with a head height of 153mm.
The transformation mechanism from mobile armor to mobile suit form can be reproduced by swapping parts.
The opening and closing gimmick of the shoulder missile pods is reproduced.
The claw arm gimmick can be reproduced with interchangeable parts.
The nozzles inside the thrusters are also reproduced in detail.
The large thrusters on the back are flexibly movable around the support pillars.
A dedicated display stand is included. It can display both the mobile suit form and the mobile armor form in flight, and can also store surplus parts.
Specifications
Item Size: 31.0cm x 20.0cm x 11.3cm
Weight: 570g
BANDAI
Bandai MG 1/100 Sword Impul...
$71.24
Shinn Asuka's Sword Impulse Gundam made its flashy introduction in the first episode of the "Mobile Suit Gundam Seed Destiny," and now is offered as this much-anticipated Master Grade kit! Utilizing the same hyper-detailed and extremely well-articulated body frame from MG Force Impulse Gundam, the Mobile Suit comes packed with its Sword Silhouette to complete Sword Impulse Gundam.
Sharply molded in color, the transformable Impulse Gundam is formed by three main parts: Chest Flyer, Core Splendor, and Leg Flyer. Core Splendor's cockpit can be opened to insert an in-scale sitting pilot figure. In addition, landing gear are provided for both the Chest Flyer and Leg Flyer as a original gimmick that's never seen in the anime! The Sword Silhouette pack carried by the Silhouette Flyer can be attached to the back of the Mobile Suit to form Sword Impulse Gundam.
Its weapons include a pair of Anti-Ship Laser Swords that can be combined into a double-bladed sword, a Beam Rifle, two Assault Knives, and an openable shield. The wing section of the Sword Silhouette pack is detachable for use as a giant boomerang, plus it can also be turned into a pair of Flash Edge beam boomerangs. Unpainted 1/100-scale figures of Shinn Asuka and Lunamaria Hawke (both molded in white) are packed in the set along with foil stickers, dry-transfer decals, and marking stickers to add detail to the completed model. Note: The Action Base 1 shown in the photos below is not included, sold separately.
This is a posable, Master-Grade injection-plastic kit of an item from the Gundam Universe.
BANDAI
Bandai 30MS Option Parts Se...
$13.99
This set of tiger-inspired armor is perfect for your 30MS (30 Minutes Sisters) Richetta figure! It includes upper thigh parts, armor, and parts for her legs above the knees. You can attach mechanical legs from 30MM (30 Minutes Missions) kits too (sold separately) if you like, too!Includes
Upper thigh parts (x1 set)
Legs above knee parts (x1 set)
Armor (x1 set)
BANDAI
Bandai 30MS Option Parts Se...
$13.95
This set of birdlike armor is perfect for your 30MS (30 Minutes Sisters) Tiasha figure!It includes upper thigh parts, armor, and parts for her legs above the knees. You can attach mechanical legs from 30MM (30 Minutes Missions) kits too (sold separately) if you like, too!Includes
Upper thigh parts (x1 set)
Legs above knee parts (x1 set)
Armor (x1 set)
BANDAI
Bandai MG 1/100 Crossbone G...
$69.95
Long time fan favorite Crossbone Gundam X-1, from the popular Crossbone Gundam manga series, finally got the Master Grade treatment and "Ver. Ka"-ed by the legendary mecha designer, Katoki Hajime!Not only does it come with all the armaments for this uniquely designed pirate-looking Gundam such as heat daggers, beam sabers, scissor anchors, brand markers, Zambuster, and an ABC (Anti-Beam Coating) mantle, it also includes a chest part for you to turn it into Crossbone Gundam X-1 Kai (Custom)!
BANDAI
Bandai MG 1/100 Hi-Zack
$58.95
The Hi-Zack was a sort of "new and improved" version of the Zaku II, making its first appearance in Z Gundam.The lighter alloy used for its construction allowed for the installation of larger fuel tanks and more powerful thrusters, improving manoeuvrability in combat; this, plus easy maintenance, made the machine was popular among its pilots.Bandai has reproduced this fantastic machine (designed by Kunio Ohkawara) in a Master Grade kit with their usual attention to detail and stupendous quality! Dry-transfer decals and stickers are included for details.
BANDAI
Bandai Figure-rise Standard...
$67.95
From "Mobile Suit Gundam SEED" comes a Figure-rise Standard kit of the popular vocalist, Lacus Clyne!She comes with three different expressions: a normal face, a smiling face and a troubled face. The normal face is recreated using tampo printing, so no stickers are required! She even comes with optional parts to recreate her miniskirt version outfit. Hand parts and the Halo known she calls Mr. Pink (aka "Pink-chan") are also included.Includes
Standard expression (tampo printed)
Smiling and troubled expression
Hand parts: flat hand (left and right), praying hands (left and right), Halo hand (left and right)
Pink Halo (ears open, ears closed)
Foil sticker sheet
Water transfer decals
Display stand
BANDAI
Bandai MG 1/100 Gouf Ver. 2.0
$53.44
A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.
In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!
Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.
This is a posable, Master-Grade injection-plastic kit of an item from the Gundam Universe.
BANDAI
Bandai HG 1/144 V Gundam
$25.95
Highly detailed and articulated snapfit kit, molded in multiple colors with stickers for the markings.
BANDAI
Bandai HGUC 1/144 Nemo Unic...
$29.95
That distinctly green Mobile Suit is back in its newest iteration that Grunt suit aficiandos will love. The Unicorn version of the Nemo features some great articulation, a Beam Rifle, two Beam Sabers, a shield and even extra sets of hands.
BANDAI
Bandai RG 1/144 ZGok Char C...
$49.95
This 1/144-scale Real Grade kit of Char's custom version of the fast and agile Z'gok features full posability thanks to its internal "skeleton." Parts come molded in color, so no paint is required to complete this easy to build kit, but it can be used to add detail! Includes stickers for markings.
BANDAI
Bandai HG 1/144 Stark Jegan
$33.74
From the most excellent Gundam Unicorn series comes another highly-anticipated HGUC snap-fit plastic kit.
Parts are molded in color and an ample amount of poly-caps are used allowing plenty of articulation. The heavily armored Stark Jegan comes with detachable missile pod armor parts and its signature weaponry consisting of two beam sabers, a hyper bazooka, and a beam rifle.
BANDAI
Bandai MG 1/100 OO Gundam S...
$99.95
The MG 00 Raiser is an enormously popular Gundam Mobile Suit and Master Grade kit.
Right on the heels of that release, Bandai seems to be trying to outdo themselves with the release of the Seven Sword /G. This is the same great kit as the 00 Raiser but instead of that big Raiser you get the Seven Sword /G and everything it entails. And that's a lot. GN Buster Sword II, GN Sword II Long and Short, GN Katar, GN Sword II Blaster. Yes, definitely a lot and on top of all this you get the marking stickers, the clear effect parts. Unlike the 00 Raiser, however, this kit does not come with a green LED. But now Bandai is selling those as well.
BANDAI
Bandai RG 1/144 Zeta Gundam
$50.95
Bandai marks the 10th release in their Real Grade line with the mighty Zeta Gundam.
In the anime, and in MG and PG kit forms, the Zeta transforms into its Wave Rider form and the big question being asked when Bandai announced an RG Zeta was if it would a transforming kit. And it is! Bandai's RG MS Advanced Joint frame took 1/144 scale kits to a whole new level and the Zeta raises the bar again thanks to the amazing transformation engineering. Like previous RGs the Zeta features various armor color tones as well as an abundance of marking stickers but this guy can transform!
BANDAI
Bandai MG 1/100 MSN-001A1 D...
$85.95
The Delta Plus is another sleek design found in the Gundam UC anime and previously was available as an HG but has now made the jump to join the Master Grade lineup.Much like the Master Grade ReZEL, the Delta Plus is capable of transforming from its Mobile Suit form into its Wave Rider Form. Delta Plus also comes with its Beam Rifle, two beam sabers, Shield and marking stickers.